Stiskalnica - Enojni Stolpec nakup rabljenega (3.357)

Stanje: rabljeno, Leto izdelave: 1991, Press force / t Sheet thickness / mm Stroke rate / strokes/min Nsdpfx Aewgi S Neltocw Condition: used The punching machine operates perfectly. A demonstration video is available.

Stanje: rabljeno, Leto izdelave: 1999, hidravličen da pritisna sila 100 t teža stroja cca 2,9 t Ncsdpfx Aox U A Tvsltow

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Nodpfjt Hw Amex Altjcw Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Nedpfxst Hwwdj Altocw Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 2004, Tlak 25 t Iztek 375 mm Ncodpfx Aoykb D Deltow Hod 80 mm Število hodov 120 hodov/min Nastavitev bata 45 mm Skupna potrebna moč 3,5 kW Teža stroja cca 2,8 t - hidravlična sklopka - fiksna miza

Stanje: rabljeno, Leto izdelave: 1992, Tlak 25 t Izteg 375 mm Hod 8 - 80 mm Število hodov 120 hodov/min Nastavitev batnice 45 mm Skupna potrebna moč 1,5 kW Teža stroja cca 2,5 t Ncedpfx Aoykb Dkoltjw - Hidravlična sklopka - Fiksna miza

Stanje: rabljeno, Leto izdelave: 1987, Faceplate diameter: 2200 mm Swing diameter: 2500 mm Turning height: 1600 mm Control: Siemens Total power requirement: 100 kW Machine weight approx. 35 t Vertical turning lathe with two RAMs; faceplate Ø 2000 mm; PLC-assisted control for storable cycles; RAM/channel 1 with two Capto C8 toolholders featuring through-tool cooling, RAM/channel 2 with two Capto C8 toolholders featuring through-tool cooling; Z-axis spindle in mint condition The technical data are manufacturer’s or operator’s information and therefore non-binding for us. Interim sale reserved; only our terms and conditions of business and sale apply. About us - More than 400 own machines in stock - Over 15,000 m² of warehouse space, crane capacity 70 t - More than 10,000 accessory items for your workshop Are you looking to sell machines, production lines, or your business? Contact us. You can find further offers on our website. Inspections are possible by appointment. Nodpfxjyqty Ds Altscw We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2009, Premer planske plošče: 1250 mm Višina struženja: 1250 mm Krmiljenje: Fanuc 0i-TD Največji navor na planski plošči: 12500 Nm Nedozhxi Ropfx Altocw Največji premer struženja: 1600 mm Maksimalna teža obdelovanca: 5000 kg Hitrost vrtenja mize: 2–300/min X-os: 1475 mm Z-os: 900 mm Hitri pomik: 10 m/min Vreteno konus: ISO BT50 Število orodnih mest: 12 Skupna moč: 75 kW Teža stroja: ca. 32 t Prostorska zahteva: ca. 4,7 x 5,8 x 5,5 m CNC karuselni stružni stroj z avtomatskim menjalnikom za 12 stružnih orodij z BT 50 vpetjem. Krmiljenje: Fanuc 0i-TD

Stanje: rabljeno, Leto izdelave: 2013, Letnik izdelave 1978, retrofit 2013 maks. premer vrtenja 1300 mm premer mize 1000 mm maksimalna višina obdelovanca 1500 mm dolžina obdelave 1050 mm maksimalno število obratov mize 280 obr/min T-utorji 48 x 28 hitrost vrtenja 4,75 - 250 obr/min hitri pomik 6000 mm/min Stroj je po naši oceni v dobrem rabljenem stanju in si ga je možno po predhodnem dogovoru ogledati pod elektriko. Letnik izdelave 1978 / Retrofit 2013 Razred natančnosti: IT7 Tehnične značilnosti - 4-kratni nihajni glavni nosilec Ncodpfx Aexmk E Ueltsw Pribor, prikazana orodja in vpenjalne naprave so vključeni v dobavo le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje!

Stanje: rabljeno, Leto izdelave: 1981, Premer čelne plošče: 3200 mm Premer rotacije: 5100 mm Višina struženja: 2505 mm Prečni most – nastavitev: 1500 mm Največji hod batnice: 1250 mm Ncsdpfx Alju Sbdgjtow Hod suportne enote: 2000 mm Krmiljenje: Siemens 8 T Menjalnik orodja: 16 kos Nosilnost mize: 60 t Območje vrtljajev čelne plošče – brezstopenjsko: 0,8–100 obr/min Pomik: 0,0 mm/min Hitri pomik: 6000 mm/min Moč glavnega pogona vretena: 75 kW Približna teža stroja: 70 t Prostorske zahteve: cca. 9,3 x 6,1 x 6,0 m Stroj je v odličnem stanju!! Stroj je lahko po želji opremljen tudi z novo električno opremo vključno s CNC krmiljenjem Siemens SINUMERIK 840D sl. Predelavo izvaja strokovno podjetje, 12 mesecev garancije na dele in 6 mesecev servisiranja osebja.

Stanje: rabljeno, Leto izdelave: 2001, Premer čelne plošče 850 mm Premer vrtenja 1200 mm Višina struženja 1000 mm Krmiljenje Siemens tip 840 D Menjalec orodij 36 pozicij X-hod 870 mm Z-hod 1020 mm Tehnični podatki so navedeni s strani proizvajalca oz. upravljavca in so za nas nezavezujoči. Vmesna prodaja pridržana; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, kapaciteta dvigala 70 t Nodpfjy Swhiox Altecw več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: rabljeno, Pressure: 35 t Reach: 220 mm Stroke: 10 - 120 mm Strokes per minute: 120 spm Ram adjustment: 50 mm Table surface: 590 x 440 mm Ram surface: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Features: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work will be carried out in our workshop: - Complete disassembly of the press, cleaning, and technical inspection - Removal of shaft, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Enzian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control and touch display Operation via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) as agreed with the end customer, Standard 0.8-1.0 m beside the machine, incl. new wiring of the press Njdpfx Aljykb Dqjtjcw - Foot switch - Two-hand operation - Current accident prevention inspection (UVV) with braking time measurement After modernization, the machine is approved for manual loading operations at open tooling.

Stanje: rabljeno, Leto izdelave: 1961, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table clamping surface: 595 x 410 mm Ram adjustment: 70 mm Strokes per minute: 150 spm Table height adjustment: 240 mm Total power requirement: 1.1 kW Machine weight approx.: 1.45 t Machine dimensions (L x W x H): 1.30 x 0.80 x 2.0 m Ncjdpfxstqqxbs Altjw

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 200 t Outreach: 450 mm Stroke: 30 - 140 mm Table clamping surface: 1100 x 850 mm Installation height: 500 mm Ram surface: 800 x 600 mm Ram adjustment: 110 mm Ncedpfx Asvb I Itsltew Pin hole in ram: diameter 65 mm x depth 105 mm Strokes per minute: 45 Total power requirement: 15 kW Machine weight approx.: 14.2 t Machine dimensions (L x W x H): 3.18 x 2.09 x 3.05 m

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 100 t Throat depth: 315 mm Stroke: 8 - 112 mm Table clamping surface: 725 x 570 mm Ram surface: 410 x 315 mm Ram adjustment: 80 mm Strokes per minute: 55 / 82 Hole in the ram (depth x diameter): 85 x 50 mm Installation height: 355 mm Total power requirement: 7.5 kW Machine weight approx. 6 t Ncsdpfxeugnpij Altjw Machine dimensions (L x W x H): 2.00 x 1.00 x 2.87 m

Stanje: rabljeno, Leto izdelave: 1991, Pritisk 60 t Razpon 280 mm Hod 10 - 90 mm Nastavitev bata 60 mm Število hodov 110 hodov/min Površina mize 740 x 550 mm Pritrdilna plošča 740 x 555 mm Površina bata 380 x 200 mm Višina vgradnje pri največjem hodu zgoraj in nastavitvi bata zgoraj 360 mm Skupna potrebna moč 4 kW Teža stroja pribl. 3850 kg Dimenzije pribl. Š 1,1 x G 1,6 x V 2,3 m - fiksna miza - pritrdilna plošča - hidravlična sklopka Ortlinghaus z dodatno zavoro - ročno centralno mazanje Njdpfx Alsv Az T Setscw Stroj je bil pri nas delno obnovljen, in sicer: - demontiran, očiščen in tehnično temeljito pregledan - izvlečena gred, preizkus razpok, nova tesnila - novo barvanje - nova elektro omara z zaslonom na dotik - nova prelomna plošča + rezalni obroč - aktualen preizkus stiskalnice

Stanje: rabljeno, Swing diameter 2000 mm Turning height 1800 mm Control system Siemens Sinumerik 840 Dsl Spindle speed range 2.8-315 rpm Cross rail adjustment - vertical 1200 mm Cross rail adjustment - horizontal +/- 1150 mm Tool slider - vertical travel 1500 mm Tool slider section 240 x 240 mm Minimum plunge diameter 340 mm Cutting force 50 kN Torque at faceplate 50,000 Nm Speed range level 1: 2.8 - 80 rpm Speed range level 2: 12 - 315 rpm Maximum clamping weight 12,000 kg Ncsdpfey Dvlqex Altjw Faceplate drive power 105 kW Machine weight approx. 33 t Space requirement approx. 10 x 5 x 6.5 m Additional Technical Data: - Feed range (three-phase servo motors): 1-3000 mm/min; 0.01-50 mm/rev - Cross rail travel speed: 425 mm/min Equipment / Accessories - Increased turning height (+600 mm) - Extension of Z-axis to 1500 mm - Tool magazine positions: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw touch probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Refurbishment: - Extensively refurbished in 2012 by Siemens Industry Munich - Among other things, the following were reconditioned: control system, wiring, motors, measuring systems, etc. - Further information can be found in the PDF

Stanje: rabljeno, Leto izdelave: 1965, Premer čelne plošče: 1250 mm Premer vrtenja: 1450 mm Višina struženja: 1200 mm Premik suportnega vozička: 800 mm Stranski suport – horizontalni premik: 600 mm Generalno obnovljen leta 1996 Stroj je ciklično krmiljen Nov upravljalni pult Tehnični podatki so podatki proizvajalca oz. uporabnika, zato so za nas nezavezujoči. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O podjetju več kot 400 strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali vaše podjetje? Kontaktirajte nas. Ostale ponudbe najdete na naši spletni strani. Ogledi so možni po predhodnem dogovoru. Veselimo se vašega obiska. Ncjdpeyqvriofx Altew Vaša ekipa Markus Hirsch

Stanje: rabljeno, Leto izdelave: 2026, Planscheibendurchmesser 1.600 mm Umlaufdurchmesser 2.000 mm Drehhöhe 1.400 mm Steuerung Fanuc Nedpfx Aoyiu N Djltecw Max. Drehmoment 23.863 Nm Schnittkraft max. 3.000 kgf max. Werkstückgewicht 10.000 kg Tischdurchmesser 1.600 mm Tischgeschwindigkeit min Antriebsleistung - Tisch 37/45 kW Auflösung 0,001 ° Vorschubgeschwindigekeit 0 - 1.200 °/min Max. Tischdrehzahl 3,333 1/min Schaftdurchmesser 32 mm Spindelkonus ISO 7/24 / Nr.50 Spindeldrehzahl 30 - 3.000 min/-1 Antriebsleistung - Werkzeugspindel 15 / 18,5 kW Max. Drehmoment 235 Nm Schlittenquerschnitt 220 mm x-Achse 1.900 mm z-Achse 900 mm Querbalkenverstellung 700 mm Werkzeugaufnahme MAS-BT 50 Anzahl der Werkzeugplätze 24 (12 + 12) pos. max. Werkzeuggewicht 50,0 kg Anzugsbolzen DIN 69872.50 Eilgang (X / Z) 7,5 m/min Vorschubgeschwindigkeit max. 7.500 mm/min Eilgang des Querbalkens 300 mm/min Gesamtleistungsbedarf 80 kVA Maschinengewicht ca. 34,0 t Raumbedarf ca. 7,50 x 6,50 x 5,20 m CNC - Karusselldrehmaschine HANKOOK - VTC 160 E - NEUMASCHINE

Stanje: rabljeno, Technical Details: Faceplate diameter: 1400 mm Swing diameter: 2000 mm Turning height: 1270 mm Main motor: 80 kW Faceplate speed range: 1 - 355 rpm Nsdsvb Dcmepfx Altocw Max. workpiece weight: 6,000 kg Milling motor: 37 kW Milling spindle speed range: 7 - 3000 rpm Milling spindle taper: ISO 50 Crossbeam vertical adjustment: 800 (8 x 100 mm) mm Ram dimensions: 240 x 240 mm Max. ram stroke: 1250 mm Machine weight approx.: 50 t Total power requirement: 133 kVA Space requirement approx.: 11 x 5 x 6.4 m Machine overhauled and modernized by the manufacturer in 2008 with CNC SIEMENS 840 D Automatic 72-position tool changer C-axis for driven tools Angle and straight tool holders with CAPTO interface Coolant system and chip conveyor

Stanje: rabljeno, Leto izdelave: 2009, Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1500 mm Control: SIEMENS 840 D Max. workpiece weight: 5,000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 – 320 rpm Table drive power: 100 kW Torque: 31,784 Nm Total connected load: 218 kW Machine weight approx.: 55 t Turning and boring heads: - 4 x turning heads + turning tool holders - 3 x turning heads for Capto system - 1 x driven boring head - 2 x angle drilling heads (manufacturer: Benz) Dimensions: - Turning diameter on faceplate: 2000 mm - Faceplate diameter: 1800 mm - Turning height with turning head L100: 1500 mm Performance at ram: - Clamping force of tool holder or accessories: 120,000 N - Max. feed force axes Z and X: 30,000 N - Drive power for milling, drilling, and grinding spindle: 37 kW - Speeds for turning operations: 10 – 3,000 rpm Travel: - X-axis (horizontal slide on crossbeam): -2,270 / +2,275 mm - Z-axis (vertical slide on crossbeam): 1,250 mm - C-axis (table rotation): 360° Feed rates: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min - C-axis: 3.25 rpm Coolant system: - Coolant/filtration capacity: 1,500 l Chain-type tool magazine with 80 positions: - Max. tool weight: 30 kg - Max. tool diameter with free adjacent spaces: 250 mm Disc magazine with 12 positions: - Max. weight of tool holder/accessory unit: 150 kg - Max. tool holder length: 500 mm - Max. magazine load: 1,000 kg Pallet changer with 2 pallets: - Pallet diameter: 1,800 mm - Pallet load capacity (centered): 5,000 kg Ncodpovylilofx Altsw - Pallet load capacity (off center): 4,000 kg Equipment / accessories: - 1x pallet with jaw boxes, diameter 1,800 mm - 1x hydraulic chuck with base jaws, diameter 1,800 mm - Various drilling and milling heads - Various turning tool holders - 2x probe sensors

Stanje: rabljeno, Leto izdelave: 1972, Planscheibendurchmesser 1200 mm Umlaufdurchmesser 1600 mm Drehhöhe 1250 mm Supportverstellung 800 mm Steuerung Siemens Typ 840 c Antriebsleistung 56 kW Mašina je remontovana i prepravljena u firmi Seidler Br. 97237 Br. 37 Tehnički podaci su prema navodima proizvođača, odnosno korisnika i stoga za nas nisu obavezujući. Zadržavamo pravo na međuprodaju; važe isključivo naši opšti uslovi poslovanja i prodaje. O nama više od 400 vlastitih mašina na lageru preko 15.000 m² skladišnog prostora, dizalična kapacitet 70 t više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite da prodate mašine, proizvodne linije ili svoju firmu, obratite nam se. Dodatne ponude možete pronaći na našem veb sajtu. Nedpjyqvfijfx Altocw Pregled mašina moguć je uz prethodni dogovor. Radujemo se vašoj poseti. Vaš Markus Hirsch tim

Stanje: rabljeno, Leto izdelave: 2002, Tlak 80 t Iztek 300 mm Hod 8-110 mm Število hodov 100 hod/min Nastavitev batnice 75 mm Površina mize 750x590 mm Površina batnice 540x400 mm Prehodna odprtina v mizi 200x200 mm Nedpfx Aey I Dd Neltjcw Višina mize 780 mm Oznanina v batnici Ø 40 mm Skupna potrebna moč 11 kW Teža stroja cca 5,5 t Prostorske zahteve cca D׊×V 1200x1700x2700 mm Hidravlična kombinacija sklopke in zavore, pnevmatsko upravljana Centralno mazanje z mastjo Polavtomatska nastavitev hoda Hidravlično prenapetostno varovanje Motorizirana nastavitev batnice Izravnalni valj batnice Prednji nasprotni ležaj

Stanje: rabljeno, Leto izdelave: 2008, Pritisk 40 t Izvlek 230 mm Hod 4-100 mm Delovna površina mize 650x450 mm Delovna površina bata 420x220 mm Nastavitev bata 85 mm Prehodna odprtina v mizi 170x220 mm Višina mize 800 mm Število hodov 60 hodov/min Vgradna višina 375 mm Dimenzije (VxŠxG) 2800x1200x1900 mm Teža stroja ca. 3,2 t Serijska številka: 54579 Centralno mazanje Mehanska lomna plošča v batu Nastavljiva miza Hidravlična sklopka-zavorna kombinacija Poseben krmilni omarica Dvoročno upravljanje Ncsdpfjy I Ddvox Altsw Nožno stikalo Odobreno za ročno polaganje

Stanje: rabljeno, Premer vrtenja: 1.600 mm Največji premer kroženja: 1.700 mm Krmiljenje: Siemens - 840D Območje vrtilne hitrosti planske plošče: 1 - 320 U/min Hitri pomik: 3.000 mm/min Območje podajanja: 1 - 3.000 mm/min Velikost palete: 1.168 mm Število palet: 2 Ncodpfx Aevp Shgsltjw Glavni motor: 55 kW CNC karuseljski stružni stroj - enostebrični | SCHIESS MOWEG - BERTHIEZ TFM 125 Leta 2007 je SCHIESS MOWEG izvedel generalno obnovo stroja (RETROFIT). Video stroja na lokaciji tovarne vam z veseljem posredujemo na zahtevo. Stroj je v zelo dobrem stanju in je do nedavnega deloval v letalskem podjetju. #Tags: TFM125 | TFM-125