Luknjač za luknje

PEDDINGHAUS HYDRAULIC 280

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg Iodet Iklkepfx Agpoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. Isdpfjl Dw D Eex Agpja The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: rabljeno, številka stroja/vozila: 2520, Round steel: 42 mm Isdpfocxxrpjx Agpoa Square steel: 38 mm Angle steel: 90° 110 x 10 mm Flat steel: 150 x 16 mm Blade length: 250 mm Notching depth up to: 12 mm Notching device for L and T steel: 80 x 10 mm Punching station - Pressing force: 50 t Stroke: 27 mm Punching station - Capacity (diameter x thickness): 25 x 16 / 20 x 19 mm Machine weight approx.: 1.6 t Space requirements approx.: 1.6 x 0.85 x 1.8 m

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 82-540, Offer 18474 Technical Specifications: Isdpog Eubnjfx Agpja - Flat bar shear cuts flat bar up to 100 x 18 mm - Blade length approx. 250 mm - Profile steel shear cuts angles: - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar shear cuts: - Round bar, 90° up to 36 mm - Square bar, 90° up to 30 mm - Notching unit: sheet metal up to 8 mm - Punching station: - Press force approx. 50 t - Throat depth 350 mm - Punches in steel up to 20 mm Ø at 15 mm material thickness - Drive: 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1,900 kg

Stanje: novo, Sheet thickness 1.2 mm Roller diameter 62 mm Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Machine is equipped with: Ijdpfx Agefv H Edspoa - Emergency stop switch - Foot pedal - 7 sets of rollers

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Dimenzija: 1290x900x40 mm (45x20 mm) rabljeno, vroče pocinkano (42 kosov) Dimenzija: 1290x1145x40 mm (45x20 mm) rabljeno, vroče pocinkano (44 kosov) Rešetkasti pokrov 1290x900x40 mm (45x20 mm) 69 EUR/kos brez DDV Rešetkasti pokrov 1290x1145x40 mm (45x20 mm) 90 EUR/kos brez DDV Če potrebujete regale ali dodatno opremo v drugih kombinacijah ali izvedbah, nas kontaktirajte. Z veseljem vam ponudimo široko paleto novih in rabljenih regalov ter dodatne opreme, vključno s podporo pri načrtovanju. Dodatna oprema, kot je na primer: okviri, kotni in čelni zaščiti, zaščita pred naletom, zadrževalne varnostne mreže, iverne plošče, rešetkaste police, zadnje mreže, prečne nosilce – vse na voljo. Iodjqfd Hgopfx Agpoa Dostava: Za izračun stroškov dostave nam, prosimo, posredujte vašo poštno številko, kraj ter zahtevano količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje!

Stanje: novo, Leto izdelave: 2025, Delivery every Monday and Tuesday! Reliable! 3-segment segmented bending machine with foot operation SGR-1000mm/1.5mm EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for quick and easy adjustment - Folding machine with complete foot operation - Piano-type inserts in the upper, lower, and bending beam provide a wide range of bending possibilities Boxes and special profiles with opposing bends can be easily made with this model - Our bending machine is a well-proportioned all-welded construction with foot-operated upper beam clamping, significantly simplifying and speeding up operations since both hands remain free for positioning and aligning material. - The easily and quickly adjustable bending angle stop ensures safe, repeatable production of the required bending angle, even in large batch production - Upper beam, lower beam, and bending beam are all segmented (piano type) - Segments are movable and removable - Precision-ground bending segments made of extremely tough and hard special alloyed steel - The bending beam is extremely easy to operate thanks to a robust compression spring/damper - Heavy-duty and robust construction for decades of operation - Convenient opening and closing of the upper beam Technical data: - Max. working width: 1000mm - Maximum bending angle: 160 degrees - Max. sheet thickness (steel): 1.5mm - Weight: 235 kg Iodpfx Agjcvbu Aopoa - Segment jaw widths: 30, 40, 50, 60, 70, and 100mm - All three beams equipped with segment jaws (fully segmented) - Stop for preset bending angles - Degree scale - Clearance: 100mm Price: 4,700 Euro Castor wheels 1 set included SCRIBING TEMPLATE FREE! Delivery time: every week Cash payment upon delivery Delivery cost: 180 Euro within Germany Please contact us :) We look forward to your inquiry! Invoices are issued either with 0% VAT as an intra-community delivery or plus 19% VAT.

Stanje: rabljeno, številka stroja/vozila: 24599,

Leto izdelave: 1990, Stanje: rabljeno, Cutting diameter: 420 mm Saw band length: 4800 mm Table height: 600 mm Total power requirement: 3.8 kW Isdpfx Asl Ichnogpja Machine weight: approx. 1.3 t Required space: approx. 2500 x 1200 x 1600 mm The bandsaw is in very good condition.

Stanje: dober (rabljeno), Leto izdelave: 2001, Trennjaeger TEBA 240 DG Round capacity: 240 mm Rectangular capacity: 230 x 230 mm Ijdpfx Aju Ekw Nogpsa Motor: 1.5 kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saw angles: 90° / -45° / +45° / +60° Cutting speed: 40 / 80 m/min.