Frekvenčni pretvornik 33-44 kW

PDL ELECTRONICS Microdrive-3 UDZ-70

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Hfsdpfx Ash Akm Tsdkok

Stanje: rabljeno, Leto izdelave: 2008, Screw cap GL 18 Closure for medicine bottle GL18 Injection mould with 10 cavities Hodpfx Aodqbzqjdkofk

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Screw pump Manufacturer: Busch Hodpsd Rafbefx Adksfk Model: Cobra DS 600 E Condition: very good Availability: from stock

Leto izdelave: 1997, stanje: dober (rabljeno), Letnik izdelave: 1997 Moč: 75 kW Tlak: 9 bar Hedpfx Adjg A Dypjksfk

Stanje: dober (rabljeno), Hidravlična črpalka, oljna črpalka, zobniška črpalka, lamelna črpalka, hidravlični agregat, dvojna hidravlična črpalka - Dvojna hidravlična črpalka: iz brizgalnega stroja KHS Krauss Maffei KM 1000-5000A - Črpalka 1: Voith tip IPH 6/5-125/50 300 bar - Črpalka 2: Voith tip IPR/H 6/5-125/40 210/300 bar - Pogon: Loher 75 kW 1500 v/min - Posamezne komponente: filter/ventili glej slike Hjdpfjg Avqcex Adksfk - Dimenzije: 2285/800/H900 mm - Teža: 1132 kg

Stanje: dober (rabljeno), Schuler PE4s 50/800 hitrotlačna stiskalnica Proizvajalec: Schuler Hfedpfsgryc Nex Adksk Tip: PE4s 50/800 Hitrotlačna stiskalnica 61/21 600/3 Tlačna sila: 50 t Izsev: 800 mm Število hodov/min: 125-300 Hod bata: 40 mm Kohler navijalni razvijalec 500.1 M Dokumentacija je na voljo po nakupu Prodajamo večje število paternosterjev. Poleg približno 50 paternosterjev je na voljo še nešteto drugih strojev. Po nakupu je znesek zapade v plačilo v 7 delovnih dneh. Oglejte si tudi naše druge ponudbe. Veliko užitka pri brskanju in nakupovanju. Financiranje preko naše banke je prav tako mogoče. komplett-konzept.leasingo.de Dodatni artikli – novi in rabljeni – so na voljo v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Leto izdelave: 1986, obratovalne ure: 10.000 h, Press force: 30 tons (US) approx. 270 kN Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 rpm Fixed stroke: 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Hfodsnl Snepfx Adksk Features: * Hydraulic clutch * Roller feed Manufacturer: Sankyo Model: Variax V70 Strip width: max. 100 mm Only approx. 10,000 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, With a focus on optimized and energy-efficient drives in the vehicle industry, significantly higher demands are being placed on the components of the drive system. Greater power transmission and higher torque with simultaneously smaller dimensions are the main challenges. As a result of this development, the demand for cold-formed splines has increased. With the Vertical Splines Press (VSP), Sack & Kiesselbach offers customers a solution that provides both technological and logistical advantages over conventional technologies (such as rolling or broaching). This comparatively compact and highly user-friendly press can be configured for both manual and fully automated operation. In addition to the splines press, customers can also obtain the appropriate tool system and corresponding process technology from a single source. Hfodpfx Adegtty Tjksk 1 used Vertical Splines Press Manufacturer: Sack & Kiesselbach Model: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between uprights: 530 mm Splines cylinder speed: 3–9.5 mm/s Dimensions Height: 2,900 mm Width: 3,100 mm Depth: 1,400 mm Drive power: 8 kW Special features: Digital travel measurement system Spline tool for internal toothing

Stanje: rabljeno, Frequency: 47–63 Hz Hjdpfjd Ihdbjx Adkofk Total power requirement: 18.5 kW Space requirement: approx. 0.52 x 0.28 x 0.25 m Item No.: 6SE6440-2UE31-8DA1 MICROMASTER 440 without filter, 3 AC 500–600V +10/-10%, 47–63 Hz, constant torque 18.5 kW, overload capacity 150% for 60 seconds, 200% for 3 seconds, quadratic torque 22 kW, 520 x 275 x 245 mm (H x W x D), protection class IP20, ambient temperature –10 to +50°C, without AOP/BOP.

Stanje: rabljeno, Leto izdelave: 1990, maks.: vlečna sila 25.000 kg maks.: dolžina orodja 3.520 mm maks.: hitrost rezanja 9,6 m/min prehodna širina: 520 mm Hjdpfscm Eiwox Adkefk Stroj je obdeloval ojnice in pokrove ojnic. Stroj je zasnovan za množično proizvodnjo (izhod: 400 kosov/uro)