Komorna filtrirna stiskalnica 1200/88

Passavant 1200/88

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 630 mm, izvrtina vretena: 320 mm, premer struženja: 1.200 mm, premer struženja nad ležiščem sani: 930 mm, stružna dolžina: 3.000 mm, Lathe in very good technical condition, has seen very little use and was not utilized for machining pipes. Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model meets all the specific criteria for machines intended for the Oil & Gas sector: • Huge spindle bore (Big Bore): Machines in this version have a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows for easy passage of thick-walled drill and casing pipes. • Dual chuck system: The headstock construction allows for the installation of two independent lathe chucks (front and rear, typically with a diameter of 28 inches), which clamp and stabilize the pipe at both ends of the spindle. • Optimal working range: The 3m designation defines the turning length between centers (3000 mm), which, combined with the swing over bed of 930 mm (hence the 90 in the model name), enables machining of massive pipeline elements. • Extreme rigidity: FUM POREBA products are renowned for their monolithic, very wide, and heavy cast iron beds, which effectively dampen the significant vibrations generated during thread cutting, especially with tapered threads. Gujdoy Sf Azepfx Ab Eoh In international used machinery catalogs, this specific Poręba model is categorized directly under Oil Field Lathes. TECHNICAL DATA: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6" • Swing over cross slide: 630 mm / 24.8" • Swing in gap: 1200 mm / 47.2" • Maximum turning length between centers: 3000 mm / 120" • Bed width: 585 mm / 23.0" Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5" version) • Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and threading system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1" • Tailstock quill stroke: 300 mm / 11.8" • Quill taper: Morse No. 6 (MT6) Drive and overall dimensions • Main motor power: 22 kW / 29.5 HP • Total machine length: approx. 5500 mm / 216.5" • Total machine width: approx. 1750 mm / 68.9" • Total machine height: approx. 1500 mm / 59.0" • Total machine weight: approx. 8000 kg / 17,630 lbs

Stanje: rabljeno, System: Mobile chamber filter press, used Type: Netzsch Application: Sludge dewatering Item No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 mm Number of plates: approx. 100 Gusdpfxswqydwo Ab Esh Filter plates: PP (polypropylene) Filter cloths: optionally available, tailored to the medium Filter area: approx. 250 m² Press volume: approx. 3540 dm³ Filter pressure: approx. 15 bar Pump 1: SEEPEX Type: BN 35-12 Commission number: 266222 Pump 2: SEEPEX Type: BN 10-24 Commission number: 266223 Pump 3: SEEPEX Type: BN 75-6LT Commission number: 266224 Washing system: No Conveying technology: Yes Polymer preparation unit: Yes Application: Sludge treatment, dewatering system. Filter presses are discontinuous pressure filters used for solid-liquid separation of suspensions. For purchase or rental: Rental or purchase possible. Machines can be inspected at our site by prior arrangement.

Stanje: zelo dobro (rabljeno), Prodam ta stroj, priključen, možno preizkusiti. Maks. premer obdelovanca ..... 1600 mm Modul ..... 16 - Moč glavnega elektromotorja ..... 12 kW Dimenzije d x š x v ..... 4300 x 2000 x 3170 mm Teža stroja ..... 18500 kg Video stroja lahko pošljem preko aplikacije WhatsApp. Guodpfxjv Nqppe Ab Ejh

Stanje: rabljeno, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of table clamping plate: approx. 3100 mm Table height / construction height: 1050 mm Table load capacity: max. 20 tons Ball screw: Ø 100 mm Lead: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic guideway cover - From a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots (28 mm) - Drive via SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Gsdpfethuzpex Ab Eouh Overall length: 9500 mm Width: 2000 mm Construction height: 1050 mm Net weight: 28 tons Good condition

Stanje: rabljeno, System: Mobile chamber filter press, dewatering unit, sludge treatment plant, used Application areas: Chamber filter press, mobile dewatering, interim dewatering Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate size: 1200x1200 mm Number of plates: 103 Filter plates: PP (polypropylene) Cake thickness: 30 mm Filter cloths: optionally available, customisable to the medium Filter area: approx. 230 m² Press volume: approx. 3550 dm³ Gjdpernnt Ijfx Ab Ejuh Filtration pressure: approx. 15 bar Plate shifting: automatic Pump technology: optional Switch cabinet: yes Discharge: via discharge screw conveyor Mounted on: semi-trailer Purchase or rental: Inspection of the units possible at our facility by arrangement.

Stanje: rabljeno, Technical Details: Swing diameter over bed: 830 mm Swing diameter over cross slide: 540 mm Turning length: 3000 mm Swing diameter over support: 540 mm Centre distance: 3000 mm Faceplate diameter: 800 mm Rapid traverse X-axis: 4 m/min Control: MTC K (Monforts) Spindle speed range: 2 - 1,600 rpm Spindle bore: 88 mm Tailstock taper: MT6 Gujdpewmlknjfx Ab Ejh Tailstock quill stroke: 200 mm Max. workpiece weight between centers: 1,250 kg Max. workpiece weight (unsupported): 3,000 kg Swing diameter in gap: 1,200 mm Gap width: 310 mm Machine weight approx.: 6.85 t (without chip conveyor and coolant tank) Machine dimensions approx. LxWxH: 2.55 x 1.1 x 1.29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculated interpolation on NC control Chip conveyor manufacturer: Kabelschlepp 3-jaw chuck D=500 mm, without clamping jaws Various accessories

Stanje: rabljeno, Technical details: Honing diameter: Ø 400 mm Stroke: 600 mm Throat depth: 390 mm Table size: 1,550 x 780 mm Clamping surface: 1,400 x 480 mm Guedeu Ngybopfx Ab Eeh Table: fixed Total power requirement: 4.1 kW Machine weight approx.: 2.8 t Machine dimensions (LxWxH) approx.: 2.0 x 1.2 x 4.35 m Precision honing machine with cross table Additional technical features: - Longitudinal travel of machine table approx. 500 mm - Cross travel of machine table approx. 200 mm - Working height 350 mm (not adjustable) - Distance between column/table 0 - 200 mm Equipment: - Oil tank Ø 300 x 600 mm - Control panel as per documentation.

Stanje: rabljeno, Tehnične podrobnosti: Premer obdelovanca nad strojno mizo: 1200 mm Premer obdelovanca nad podporo: 800 mm Dolžina obdelovanca: 3200 mm Dolžina vretena: 600 mm Višina središča, merjeno na strojni mizi: 600 mm Gujdpfx Abjzuyfas Ejh Premer obdelovanca na vretenu: 600 mm Število vrtljajev vretena – brezstopenjsko: 4,6–545 vrt/min (22 stopenj) Premer vretena: 90 mm Pomik: 1,4–510 m/min Stožčasto vreteno: MK6 Skupna potrebna moč: 15 kW Masa stroja, približno: 10,0 t Dimenzije D x Š x V: 6,20 x 2,00 x 1,80 m Dimenzije električne omarice D x Š x V: 0,55 x 0,33 x 1,0 m Oprema: digitalna enota za merjenje poti (posodobljena) plošča Ø 1000 mm (štiriročna) štiri rezkalni vpenjalniki zaprt nosilec, notranji premer 250 mm gibljiva špica enota za stožčasto obdelavo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 22.372 h, laserske ure: 11.345 h, laserska moč: 4.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, skupna masa: 16.000 kg, skupna dolžina: 11.600 mm, skupna širina: 5.200 mm, skupna višina: 2.200 mm, delovno območje: 40.002.000 mm, Oprema: hladilna enota, Standard equipment: • Enclosed machine frame with integrated laser unit • Laser unit: CO₂ laser TruFlow 2000, RF-excited, maintenance-free turbo radial blower, mirror telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor for small parts/scrap • Drive: Maintenance-free three-phase servo motors • Quick-change cutting head system Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure adjustment • ControlLine capacitive height and process control • Automatic focusing FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic small hole production • PlasmaLine plasma sensor technology • Automatic sheet metal and edge detection • Programmable power cycles • Microweld • Spraying device for safe thick sheet processing • Blowing automation • Residual heat extraction • Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • Workshop programming with TruTops Laser lite Safety: • Multi-beam light curtains, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety enclosure • Network connection RJ45 via teleservice installation Gjdpfx Absv Sm Ruj Esuh • 3.5" floppy disk drive • TFT color display Higher power lasers: • TruFlow 4000, incl. NitroLine Plus, beam pipe ventilation with nitrogen and lens monitoring sensor Extended machine equipment: • PierceLine process control system • Total of 2 auxiliary machine pallets, bridge steel • Craneable beam for manual pallet handling • Compressed air cutting

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 89.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), vrsta goriva: dizel, vrsta hlajenja: zrak, Kaeser CSD 122 SFC vijačni kompresor z vgrajenim inverterjem 2,2-10,5 m3/min, 75 kW, 8,5 bar Proizvajalec: Kaeser Tip: CSD 122 SFC Leto izdelave: 2006 Obratovalni tlak: maks. 8,5 bar Moč: 75 kW Gujdpfxst A Uyue Ab Ejh Zmogljivost: 2,2 - 10,5 m3/min Delovne ure: 96244 h (Zadnje vzdrževanje: 88854 h) Mere: 1100 x 2200 x 1900 mm Neto teža: 1600 kg