Linearni pogon zobati jermen

Parker Hauser Verfahrweg 1230 mm

Stanje: novo, Leto izdelave: 2024, Protec welding turntable, 20,000 kg load capacity Steplessly adjustable speed: 0.05 - 0.35 rpm Hand-held remote control Foot pedal remote control available at an additional cost of €390 Bledpsid Szksfx Afqsr Height: 700 mm Diameter: 2,000 mm

Stanje: novo, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Blsdpfx Afjgvkk Noqjr Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed - Compact design - Including foot pedal

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, KUKA KR10 R1100 Sixx KRC4 including control panel, cables, and control cabinet. Bledpfxsmdrpvj Afqor 15,700 operating hours We can also offer you the robot fully reconditioned upon request! 2 additional units available with: 16,500 operating hours 16,000 operating hours

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), številka stroja/vozila: #2T1-1001 , Maszyna do skrawania i wygładzania wałków SHD2400S była używana jako maszyna testowa (beta) od maja 2017 do maja 2019 i jest dostępna do sprzedaży w atrakcyjnej cenie. Maszyna oferowana jest z 3-letnią gwarancją liczona od momentu instalacji. Charakterystyka maszyny SHD2400S do skrawania i wygładzania wałków: - Maksymalna długość detalu: 2 m (6,56 ft) - Moc wrzeciona: 57 kW (76 KM), silnik indukcyjny - Zakres średnic: 50–180 mm (2”–7”) - Przystosowana do zasilania: 400 VAC/50 Hz lub 460 VAC/60 Hz Blsdjh Aywnspfx Afqer Wyposażenie maszyny obejmuje głowicę ciśnieniową PH2460001 oraz system chłodzenia SHD8200 z filtracją: - Zbiorniki (na ciecz brudną i czystą): po 1130 galonów każdy (łącznie 2260 galonów) - Opcjonalnie dostępny podwójny zbiornik ścienny dla dodatkowej ochrony przed wyciekami

Leto izdelave: 1980, Stanje: rabljeno, Table length: 2000 mm Table width: 1800 mm Table load capacity: 12.5 t Total power requirement: 10 kW Machine weight approx.: 7.5 t Space requirement approx.: m Table size approx.: 2,000 x 1,800 mm Maximum table load approx.: 12,500 kg Longitudinal table travel: 1,250 mm Table height above floor: 920 mm Longitudinal feed: 0.63 - 2,000 mm/min Rotary feed (relative to 1000 mm Ø): 1 - 3,150 mm/min Rapid traverse, longitudinal: 2,000 mm/min Rapid traverse, rotary (relative to 1000 mm Ø): 3,150 mm/min Machine weight: 7,500 kg External dimensions (L x W x H): 3,700 x 2,100 x 920 mm Total drive power: 10 kW – 380 V – 50 Hz Accessories / Special features: - Steel telescopic covers for the guideways - Infinitely adjustable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and angle reading device Bsdpfx Afst Hwq Rjqslr Condition: Satisfactory to good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We kindly ask you to review our offer. Please always inquire about your needs for good used machines with us.

Leto izdelave: 1987, Stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Bljdpfxjh S Nz Ss Afqjr Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Stanje: rabljeno, Gear milling cutter Module 8 20 degrees Bedpfedklt Njx Afqjlr Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm Bsdoh Ek Daspfx Afqolr - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: zelo dobro (rabljeno), Welding positioner Focker Strähler 8 tons Bodpjf Ezdnsfx Afqjlr - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted to center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm - Condition: visually and technically impeccable, runs very quietly

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Bsdpfxst Hw T Sj Afqslr Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice