Stroj za robne trakove

Ott Tornado - TOP

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 9 kW (12,24 KM), Ott veneer press Connection value: 380V 9kW Plate size: 2250 x 1350 mm Elkom heating plates, gold-anodized Plates and hydraulics in good condition Ffjdotwp Iwjpfx Aflst

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) Fodjxymd Tepfx Afleft MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: rabljeno, Leto izdelave: 2010, Gebrauchtý stroj Rok výroby: 2010 s jednotkou pro srovnávání a zaoblování rohů Ovládací panel s LCD displejem a klávesnicí Srovnávací jednotka se 2 protiběžnými diamantovými frézami s přívodem hrany pro páskový a proužkový materiál s lepicím válcem a lepicí jednotkou s předem zastřihováním z role s přítlačnou sekcí s kapovací jednotkou s tažným kapem s jednotkou na zarovnání a frézování rádiusů Jednotka na zaoblování rohů pro čelní hrany manuální nastavení jednotek Tloušťka hrany: 0,4–5 mm Výška obrobku: 8–60 mm Minimální šířka obrobku: 70 mm Minimální délka obrobku: 140 mm Rychlost posuvu: 11 m/min Fodsw I H Rkspfx Afleft s rádiusovým stíracím agregátem s plošným stíračem s leštící jednotkou výsuvná podpěra obrobku Odsávací přípojka: 120 + 2 x 80 mm Hmotnost: cca 990 kg D x Š x V: 4550 x 1550 x 1100 mm Dostupnost: krátkodobě Sklad: Flörsheim

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), IWN Crusader stroj za pranje zabojev / pripomočkov / tunelski pralnik Letnik 2011 V celoti iz nerjavečega jekla Fedjgqutcepfx Afljft Sistem za pranje in izpiranje z digitalno nastavljivim termostatom Funkcija za doziranje kemikalij v sistem pranja in izpiranja Plinsko ogrevanje z možnostjo ponastavitve gorilnika Komplet z izpušnim ventilatorjem in cevmi za odvod V odličnem delovnem stanju, takoj pripravljen za uporabo.

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Fedpfx Asc Tmygefloft Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: Ffjdpfofbr S Rex Aflet • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: novo, Leto izdelave: 2025, CIDAN Machinery manufactures slitting and cut-to-length lines that can be programmed and operated by both skilled and unskilled users. Our cut-to-length lines are all-in-one systems designed to withstand high production volumes over time while occupying minimal floor space. CIDAN Machinery offers many of its state-of-the-art features as standard – straightening units, sheet guides for precise feeding, guillotine shears with hold-down devices and double-edged blades, feed units, foot pedals for remote operation, and much more. Fjdpfx Ajmfrgrjflsft To provide the absolute best technological solutions for coil processing worldwide, Forstner – the globally leading brand for slitting and cut-to-length lines since 1960 – is now also part of the CIDAN Machinery Group. - Processing sheet metal from coil saves money, reduces scrap, and frees up warehouse space. - We have the right solution for any production scale! - Coil processing lets you streamline operations, boost productivity, and increase your profits! - The extensive Forstner portfolio can be flexibly combined into a highly efficient production line tailored to your requirements. Key parameters such as system performance, material removal, and time required to access material are crucial for fast and cost-effective production. - With our solutions, you can easily process coils from 500 kg up to 8 tons. Larger coils mean fewer changeovers, less waste, and a more efficient processing workflow. - Need quick and flexible access to a wide range of materials without time-consuming changeovers? With a multi-mandrel decoiler you have up to eight different materials available at any time, and changing from one coil to another is considerably faster. - With one of our fully-featured slitting and cut-to-length lines, there is no longer any need to cut sheet strips separately with a guillotine shear. - Whether you sell cut-to-size sheets or rewind from large to smaller coils – we have the right solution for you! - Efficient coil handling shortens lead times, increases production floor space, and reduces capital tied up in inventory.

Stanje: generalkompletno obnovljen (rabljeno), Druck: 150 t Hubweg: 140 mm Tischgröße: 510 x 530 mm Fodpogd H Tpofx Afleft

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Ffedpfedqzcxjx Afljt Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Rezalnik Proizvajalec: Seydelmann Model: K 204 Ultra Iz nerjavnega jekla Prostornina: 200 litrov 2 hitrosti nožev Fodjtu I T Ejpfx Afloft 2 hitrosti kotla 2 hitrosti mešanja Dimenzije: 280x205x255 cm Električna moč: 78 kW Napetost: 400 V, 3 faze, 50 Hz