Stroj za robno lepljenje

OTT PACIFIC

Stanje: rabljeno, OTT Pacific V12 - Spajanje SPS-krmiljenje z LCD prikazovalnikom Predrezkalna enota s potopnim vodenjem Polavtomatski valjčni magazin / škarje za kapanje Hitrostna lepilna postaja Avtomatska pritiskalna enota Pnevmatsko poravnavanje robov 0-10° Poravnava/posnetje robov 15/30/45° - 8 mm Radialno rezkanje R-2, R-5 Zaobljanje vogalov Radialno vlečno rezilo Površinsko vlečno rezilo - bo predelano v agregat za poliranje Zvočno izolirana kabina z odsesovanjem Dsdew Nqg Eopfx Adhecn Stroj je DELAVNIŠKO PRENOVLJEN v ZELO DOBREM STANJU Na zalogi v Lieboch

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Pacific P V 12 - F Leto 1999 Moč 12,5 kW Debelina robnega traku 0,2-12 mm Dcedpsw Ni Nrsfx Adhen Pomik 12 m/min. Lepljiva valja vzporedno in v nasprotni smeri Avtomatsko vhodno vodilo Spojevanje Obrezovanje do 3 mm Poravnava rezkanja 15, 30, 45 stopinj Rezkanje radijev R 2 - R 5 Poravnava žaganja Zaobljanje vogalov Radialno strgalo Schwabbl čistilna enota Izvlečna ročna podpora Stisnjen zrak 6 bar Dimenzije 5400 x 1000 x 1400 mm Teža 2300 kg

Stanje: rabljeno, Leto izdelave: 1999, Edge thickness: 0.2 - 12 mm Workpiece dimensions: - Minimum width: 70 mm - Minimum/maximum height: 8 / 42 mm - Minimum length: 160 mm (strip edging) - Minimum length: 60 mm (from coil) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction connection: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment Dcjdpjw Amt Nefx Adhjn - Automatic magazine for coil edging up to 800 mm diameter - Pneumatic guillotine for strip edging up to 3 mm - Automatic infeed fence Pre-milling unit: - with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double cross-cut saw: - 2 high-frequency motors 0.2 kW, 12,000 rpm - 2 automatic positions = 0 + 3 degrees Flush trimming unit: - with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius trimming unit: - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Year of manufacture: 1999

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. Dedpfxehy Tlre Adhecn • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2001, No. 3210 Edge Banding Machine Ott Pacific V 6 - F Used, year of manufacture 2001 Hot-melt adhesive, hot-cold procedure Application roller with co- and counter-rotating directions Adjustable infeed guide 0 - 12 mm Milling 0.2 - 6 mm Workpiece thickness 8 - 42 mm Minimum workpiece width 70 mm Minimum workpiece length 150 mm Required compressed air 6 bar Feed speed 12 m/min Units: Jointing (Pre-milling) 2 x 1.5 kW Fine trimmer, flush & bevel 0° / 15° / 30° / 45° (2 carbide reversible knife cutterheads) Fine trimmer, radius R2 - R5 (2 carbide reversible knife cutterheads) Scraper, automatic feed (2 carbide blades) Corner rounding AR-2 (2 carbide reversible knife cutterheads) Edge polishing (2 oscillating brushes) Transport dimensions approx. 5300 x 1300 x 1250 mm (LxWxH) Dcsdpfx Adsv Naxtshen Weight approx. 2,200 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price subject to change To avoid potential misunderstandings, on-site inspection by appointment is possible and recommended Sale as-is Technical data, condition description, year of manufacture, and delivery scope according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines – sold as seen Photos and videos are for reference only and do not depict the actual delivery contents Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location