Stroj za upogibanje obročev in profilov

OSTAS OPK-85

Stanje: novo, Leto izdelave: 2025, premer gredi: 80 mm, - Section bending machine (ring bending machine) - Shaft diameter: 80 mm - Lower two rolls are hydraulically adjustable - Three driven rolls - Hydraulically adjustable guide rolls Cpedeg Sr I Uopfx Afnew - 2 digital readouts - Brake motor - Can be operated horizontally or vertically - Mobile control panel - Emergency stop - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET351P5-offAD-Bypass - 2200373733, hladilna zmogljivost: 66 kW (89,73 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 1.082 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −5 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 11,2 m³/h, tlak črpalke: 4,68 letvica, skupna širina: 866 mm, skupna dolžina: 2.250 mm, skupna višina: 2.054 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass units are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open filling system/tank attached - Bypass with manual valve between water inlet and outlet Chilled water outlet temperature adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Max. power consumption (kW): 39 Max. current (A): 68 Starting current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Cpedjwlt Rajpfx Afnow Serial No.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technically OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to use. (Subject to technical changes and prior sale!)

Stanje: novo, Ostas Profile Ring Bending Machine OPK 85 Technical Specifications: • Tool holder, shaft: 80 mm • Tool: 245 mm • Working speed: 6 m/min • Motor: 4 kW • Dimensions (L x W x H): 1020 x 1460 x 1350 mm • Weight: 1800 kg • 3 driven rollers • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Lateral guide rollers • Digital displays (2 pcs.) • Brake motor Csdpjfig A Njfx Afnspw • According to CE standards

Stanje: novo, Solid round material 75 (800) mm Solid square material 60 (750) mm Angle steel 80 x 80 x 8 (800) mm T-bar – web outward 100 x 11 (1000) mm Shaft diameter 80 mm Working speed 6.0 m/min Roller diameter 242 mm Total power requirement 4 kW Machine weight approx. 1.8 t Space requirement approx. 1.5 x 1.05 x 1.4 m Profile bending machine equipped with: - Foot pedal for right/left rotation - Shaft mount: 80 mm - With digital display - Hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roller adjustable hydraulically up and down - Horizontal and vertical operation Cpjdpfx Afofv H Ezsnow - Motor with braking system

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package Cjdpfxjwbh Ife Afnepw ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: novo, Capaciteit, mm ----- 25 x 2 mm Min/max buigradius ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaitijd buigkop ----- 0,75 sec Standaardcomponenten volgens VDMA-, ISO- en DIN-normen. OPTIES * Online verbinding met CAD-systeem en meetmachine Cpedpoga T Exjfx Afnew * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie-/botsingcontrole * Verlenging van bedlengte

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press force: 220 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height: 600 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2555 mm Machine length: 3730 mm Machine width: 2290 mm Overall height: 3055 mm Table height: 820 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 11,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) Codsq D Dzljpfx Afnjpw - Ram double-guided, stable and precise - Robust backgauge, double-guided - Manually adjustable backgauge fingers, double-guided on linear rail - Movable front support arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop - 380 V, 50–60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T control - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servomotors - CNC crowning for high bending accuracy - 2 additional backgauge fingers Other working lengths and capacities available with the appropriate accessories!

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Codpfxow Iq Ugj Afnopw Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: dober (rabljeno), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Codpfewkaaljx Afnspw Maximum pre-bending: 4.0 mm Upper roll diameter: 210 mm Diameter of lateral lower rolls: 210 mm Diameter of central lower roll: 210 mm Conical bending device via tilting of both side rolls Hydraulic drop-end bearings Swiveling control panel with digital display Dimensions (L x W x H): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's condition in terms of appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Csdpfx Aod Du T Iofnepw Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off