Stroj za upogibanje obročev in profilov

Ostas OPK-65

Stanje: novo, Solid round bar: 50 (500) mm Solid square bar: 45 (500) mm Angle steel: 80 x 80 x 8 (800) mm T-steel - web outward: 80 x 9 (800) mm Shaft diameter: 60 mm Working speed: 5.0 m/min Tool diameter: 195 mm Total power requirement: 3 kW Machine weight: approx. 1.0 t Space requirement: approx. 1.2 x 0.9 x 1.2 m Profile bending machine with: - Foot pedal for right/left rotation - Spindle mount: 50 mm - with digital display - Hardened special steel shafts Lsdpfxofv H Ewe Afrehp - 1 set of standard rollers - Lower rollers are driven - Upper roller adjustable hydraulically up and down - Horizontal and vertical operation possible - Motor with braking device

Stanje: novo, Leto izdelave: 2023, premer gredi: 80 mm, Profile bending machine AHB 80 - electro-hydraulic ring/profile bending machine - hydraulic lower roll adjustment - hydraulic side roll adjustment - independently adjustable lower shafts - three driven rolls - segmented roll segments - digital display - touchscreen - hardened shafts and standard rolls - hydraulically adjustable side straighteners - suitable for horizontal and vertical operation - mobile control panel - CE mark / Declaration of Conformity Shaft diameter 80 mm hardened fully hydraulic Motor 400 Volt 50 Hz 3-phase Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm Lhedpsqxcy Hefx Afrjp

Stanje: novo, Ostas Profile Ring Bending Machine OPK 65 Technical Specifications: • Tool Mount, Shaft: 60 mm • Tool Diameter: 175 mm • Working Speed: 5 m/min • Motor Power: 3 kW • Dimensions (L x W x H): 900 x 1250 x 1200 mm • Weight: 1080 kg Lhedpofig Aiofx Afrop • 3 driven rollers • Hardened standard rolls • Hardened and ground tool mount and shaft • Mobile control panel • Horizontal and vertical working positions • Lateral guide rollers • Digital readouts (2 units) • Brake motor • In compliance with CE regulations

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, delovna širina: 6.400 mm, najv. debelina jeklene pločevine: 2 mm, trajanje garancije: 12 meseci, delovna dolžina: 6.400 mm, Immediately available Thalmann TZ 200 / 6.4 m TZ Series Single Bender Working length: 6,400 mm 6 machine stands Sheet thickness: 2.00 mm at 400 N/mm² Equipment: - VFD (Vertical Force Drive) Lsdpowlq Naofx Afrjhp - Continuous control shafts - Manual crowning (option for dynamic crowning) - 3D graphic control system - Backgauge 1,250 mm - Bending rails 10/10 and 17 mm - Motorized backgauge, 1,250 mm range, with 6 fingers - Electric longitudinal cutter - Automatic crowning and radius adjustment - Curved folding beam - Hardened tools in the clamping and folding beam - LED bending illumination - M-Guard for factory-direct remote diagnostics

Stanje: dober (rabljeno), Leto izdelave: 2012, • Euromac MTX Flex 12 1500/22/2500 • Extensive tooling package included. • Year of manufacture: 2012 • Multitool 6 Ledpjwk Ntujfx Afrjhp • Multitool 10 • CE safety features • Table extensions up to 4 meters • Vacuum system • X-axis 2500 mm with repositioning up to 10,000 mm • Y-axis 1500 mm MTX Flex 12 features: • 3 auto-index stations, Type D – 360° programmable • 3 fixed stations, Type D • 6 fixed stations, Type B with ACTIVE Die System • Direct DRIVE system • Automatic repositioning of hydraulic sheet clamps • Standard 2 sheet clamps • Easy sheet loading system • Automatic lubrication of multitool and tool holders • Moveable operator console • Machine software: TPT (TOP PUNCH TOUCH) with 21.5” LED touchscreen • Table with brushes • Front folding table (L 850) • External cooling system • UPS system: protects the console PC from voltage dips and ensures up to 30 minutes power supply in case of power outage • Die holders: 2x D, 1x C, 2x and 1x B to A adapter • Punch adapters: D/B, D/C, B/A • Operating instructions (hard copy and digital) • Prepared for online service (internet connection required) • USB memory stick • Electrical preparation for loading and unloading system.

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Ledpfx Afst Hw R Dorehp Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: novo, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: Ledpfxeg Tzbwe Afrehp - 3 driven rollers - Digital display - Includes standard roller set for steel Description: Hydraulic/Motorized Ring Bending Machine Designed for both horizontal and vertical operation with 3 driven rollers All 3 rollers powered by motors Top roller adjustment is hydraulic Rollers are hardened Left/right operation via foot pedal Spindle diameter: 50 mm Roller diameter (top): 158 mm Roller diameter (bottom): 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Complies with CE standards Weight: 420 kg

Stanje: novo, Leto izdelave: 2020, I-beam steel, flat 80 x 15 mm (d600) I-beam steel, upright 60 x 10 mm (d800) Angle steel 45 x 5 mm (d600) Lhjdpfxegvqvms Afrjp Solid material – diameter 35.0 mm (d700) Pipe diameter 60 x 2.0 mm (d1000) Square material 45 x 45 x 3.0 mm Total power requirement: 2.25 kW Machine weight approx. 0.5 t Space requirement approx. 780 x 950 x 1450 mm SPECIAL PRICE // Exhibition machine (Year of construction: 2020) - Higher rotational speed 6.6 m/min - I-beam steel flat 80 x 15 mm (d600) - I-beam steel upright 60 x 10 mm (d800) - Angle steel 45 x 5 mm (d600) - Solid material Ø 35.0 mm (d700) - Pipe diameter max. 60 x 2.0 mm (d1000) - Square material 45 x 45 x 3.0 mm

Stanje: rabljeno, številka stroja/vozila: 51568, Pressure: 100 t Stroke: 0–500 mm Lhodpocxxrrefx Afrep Table surface: 800 x 650 mm Ram surface: 800 x 600 mm Table through-hole: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with ram at top dead center. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 mm/s, Overrun distance: 44 mm.

Stanje: novo, Display promotion. NEW. Nr. 1 unit available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-size profiles, delivering high output and excellent precision. Its robust construction provides the necessary rigidity and accuracy to the cutting assembly. The blade is driven by a two-speed motor and a special gearbox, featuring a complete bronze gear with a hardened and ground worm screw. The well-dimensioned flywheels and robust blade guides are fitted with sealed ball bearings and adjustable carbide (widia) inserts. Blade tensioning is achieved by means of an electromechanical micro-switch that puts the band under tension by rotating the blade. The machine features safety devices on the flywheel covers and the blade, and is equipped with a rotating worktable for material support and a vise with quick-approach device. Operation: Initiate cutting cycle via start button; the machine: 1. Closes the vise and activates the blade motor 2. Lowers the saw bow for cutting 3. Returns the saw bow to the starting position 4. Stops the blade motor 5. Opens the vise Manual cutting option available. Cutting speed (m/min): 38-77 Blade thickness (mm): 1.2 Mitre cutting range: From 45° left to 60° right Adjustable stop for repetitive cuts Coolant pump output: 0.06 kW Cutting capacities: At 0° (Round / Square / Rectangle): 260 mm / 250x250 mm / 220x330 mm At 45° left (Round / Square / Rectangle): 225 mm / 210x210 mm / 160x225 mm Lhodpjg S Ui Ajfx Afrop At 45° right (Round / Square / Rectangle): 215 mm / 200x200 mm / 160x210 mm At 60° right (Round / Square / Rectangle): 130 mm / 130x130 mm / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight: 415 kg