Rezkalni stroj za orodje

ORADEA FUS 22

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting Cpjdpfx Ajupxupjfnew 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - Coolant system - Chip tray - Quill cover - Set of operating tools - Technical documentation - CE version - Colour: * RAL 5015 – Sky Blue * RAL 7035 – Light Grey Optional accessories: - SINO 3-axis digital readout: € 1,995.00 - 1 set of levelling wedges (4 pcs.): € 480.00 Technical data: Work table: - Clamping surface of the fixed angle table: 670 x 320 mm - T-slots: number / width x spacing: 5 / 12 x 63 mm - Max. workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm - T-slots: number / width x spacing: 3 / 12 x 60 mm Work spindle: - Toolholder horizontal and vertical: ISO / DIN: 40 / 2080 - Main drive motor output 100% duty cycle: 1.5 kW Vertical milling head: - Speed range: 45 – 2,240 rpm Cpodpsg D Rhhofx Afnew - Number of speed steps: 18 - Manual quill adjustment: 60 mm - Swivel range: 360 degrees Travel paths: - X-axis automatic / manual: 280 / 300 mm - Y-axis automatic / manual: 250 / 270 mm - Z-axis automatic / manual: 300 / 310 mm Feeds: - Feed range: 12.5 – 630 mm/min - Number of feeds: 18 - Rapid traverse: 1,200 mm/min Dimensions and weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / machine acceptance: Before loading the machine SUBJECT TO ERROR AND PRIOR SALE!

Stanje: rabljeno, Leto izdelave: 2010, x-travel 400 mm y-travel 300 mm Codpfjv T Np Nox Afnspw z-travel 400 mm Total power requirement 3.6 kW Machine weight approx. 1.3 t

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 560 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 2.400 m/min, hitrost podajanja osi Y: 2.400 m/min, hitrost podajanja os Z: 2.400 m/min, širina mize: 450 mm, dolžina mize: 950 mm, Stabilna miza 950 x 450 mm Pomik v vse smeri ISO-40 in 3 kW 3-osni digitalni prikazovalnik CE varnostni standard Hladilni sistem s polzaprto osnovo X-os: 560 mm Y-os: 320 mm Z-os: 400 mm Dolžina mize: 950 mm Širina mize: 450 mm Nosilnost mize: 350 kg Vretenske vrtljaje: 2240 obr/min Pomik X-os: 2400 mm/min Pomik Y-os: 2400 mm/min Pomik Z-os: 2400 mm/min Zdvig vretena: 0 - 95 mm Dolžina: 1800 mm Širina: 1600 mm Višina: 1900 mm Codpfexdltbjx Afnopw Teža: 1700 kg Obvestilo: Podatki na tej strani so bili sestavljeni po naših najboljših močeh in vesti, ter kjer je bilo mogoče, pridobljeni od proizvajalca. Podatki so podani v dobri veri, vendar točnost ni zagotovljena. Tako ne predstavljajo nobenih jamstev ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: novo, Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 400 x 310 mm Saw band length: 3820 x 34 x 1.1 mm Band speed: 22 - 88 m/min Table height: 930 mm Total power requirement: 2.2 kW Machine weight approx. 0.8 t Space requirements approx. 2.22 x 1.2 x 2.1 m PROMOTIONAL Double Miter Band Saw, Semi-Automatic Hydraulic • Miter left 60° + right 45° Cedswinykepfx Afnspw • Industrial-grade hydraulics • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Band life optimization - Tracking of cutting progress • Hydraulic vice—automatic clamping/release • Material turntable with ball bearings • Quick-release sliding vice • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast feed down to material start 4. Saw band off 5. Raise frame to just above material 6. Open vice

Stanje: pripravljen za uporabo (rabljen), Travel distances X/Y/Z: 400mm/300mm/400mm, spindle speed: 2000 rpm, spindle taper: SK40, feed rate: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head swivel: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. An on-site inspection is possible. Codpfx Afjvriptsnspw

Stanje: rabljeno, Leto izdelave: 2006, x-travel 320 mm y-travel 240 mm z-travel 300 mm Total power requirement 3 kW Machine weight approx. 1 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock, without obligation: STIMIN Universal Tool Milling Machine with Digital Readout Model FUS-22-2M Year of manufacture 2006 539 _____ Working area: Longitudinal travel X-axis 320 mm Cross travel Y-axis 240 mm Vertical travel Z-axis 300 mm Clamping surface 320 x 670 mm Table load capacity approx. 75 kg Tool holder SK 40 18 spindle speeds 45 – 2240 rpm Quill stroke 60 mm Feeds X / Y - axis, stepless 2 - 1,600 mm/min Feeds Z - axis, stepless 2 - 1,000 mm/min Spindle drive power 1.5 kW Total drive approx. 3 kW - 400 V – 50 Hz Weight approx. 1,000 kg Accessories / Special Equipment: • Manual handwheels on all 3 axes for conventional milling • Additionally equipped with a digital readout (ACU RITE) for all 3 axes • Fixed angle table 320 x 670 installed • Swivel-type vertical milling head, + / - 90° tiltable • Rigid machine structure with sturdy design • Work light, coolant device, swiveling control panel, chip tray, operating instructions Cpodpfjwp S Sdex Afnew • The universal milling machine also complies with CE standards, making it particularly suitable for training workshops or other businesses. Condition : Very good condition! With manual operation, this is the ideal machine for training workshops or small batch production! Delivery : ex stock, immediate, FCA Metzingen Payment : strictly net - after receipt of invoice Click here for a video of the machine: We always have a wide selection of conventional and CNC milling machines in stock!

Leto izdelave: 1974, stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Cjdpfxeq A Icqj Afnjpw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, x-axis travel: 280 / 300 mm y-axis travel: 250 / 270 mm Csdpfxjxabqnj Afnjpw z-axis travel: 300 / 310 mm Spindle speed: 45 - 2240 rpm Speeds: 18 steps Spindle taper: ISO 40 Quill stroke: 60.0 mm Table size: 670 x 320 mm Table load capacity: 150 kg Feed range: 12.5 - 630 mm/min Feed: 18 steps Rapid traverse: 1,200 mm/min Max. workpiece weight: 150 kg T-slots: 5x 12 x 63 mm Total power requirement: 1.6 kW Machine weight: approx. 1,100 kg Dimensions LxWxH: 1265 x 1080 x 1620 mm Original price ~ €25,000 (!!) Special price on request - in tested condition - machine video available - ?v=7IsC5cg9WlI Equipment: - Robust electromotive universal milling machine - ACURITE 3-axis digital readout * with swiveling control panel, front right * incl. emergency stop button - Electromotive adjustment on all axes (X/Y/Z axis) * Rapid traverse in all 3 directions - Swiveling milling spindle guard - Coolant system - Lower chip tray - Vertical milling head with adjustable quill * Milling head swivels 90° * Tool holder ISO / DIN 40 / 2080 - Fixed angle table, 670 x 320 mm * T-slot width x spacing: 12 x 60 mm * Minimum distance between base table / spindle axis - 4x machine leveling feet - Electrical circuit diagram

Stanje: novo, Origin: Milling machine ORADEA FUS 32 (Romania) Table size: 800 x 450 mm Clamping surface: 640 x 360 mm Number of T-slots: 5 T-slot width: 23 / 14 mm T-slot depth: 26 / 13 mm Cedpfxjfz Nxtj Afnepw Stop surface: 350 x 240 mm Features: rotatable, tiltable and swiveling Dimensions: 800 x 700 x 600 mm Weight: 270 kg