Klasični stružnica

OPTITURN TH 4010V

OPTIturn TH 4010D Lathe
A precise, gear-driven lathe with digital position display, center height/center distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45–1800 rpm, spindle bore diameter 52 mm, spindle foot brake, with automatic longitudinal and cross feed, CAMLOCK chuck interface, universally applicable workshop machine. Including machine base with chip drawer, LED lamp, coolant system, etc.

Fully equipped engine lathe.
Hardened and ground bed guideways
Spindle mount Camlock DIN ISO 702-2 No. 5
Guaranteed spindle nose concentricity better than 0.015 mm
Gears and shafts are hardened and ground, running in an oil bath on precision bearings
Motor circuit breaker
DC 24 Volt electrical system
Lockable main switch
Nodpfx Abjykngrjrjwh
Forward/reverse operation on carriage selectable
Removable chip tray with guide rails
Safety handwheels with disengagement function on X- and Z-axes
Emergency stop device with foot pedal
Machine base with tool compartment on the right-hand side.

Digital Position Indicator DPA 21
User-friendly membrane keypad, splash-proof, sealed, and anti-glare
Increased working accuracy
Reduced error rate thanks to clear design
X, Y/Z0, Z-axis with 8-digit display each
Supplied sensor for spindle speed detection
Glass scales on all three axes

Connection voltage: 400 V
Drive motor power: 2.4 kW
Protection: 16 A
Spindle taper: MK 6
Spindle mount: Camlock No. 5
Spindle bore: 52 mm
Center height: 205 mm
Center distance: 1000 mm
Swing over bed Ø: 410 mm
Swing over cross slide Ø: 270 mm
Swing without gap bridge Ø: 540 mm
Turning length in gap bridge: 165 mm
Bed width: 206 mm
Spindle speed: 45–1800 min⁻¹
Number of gear steps: 16
Travel of top slide: 100 mm
Travel of cross slide: 195 mm
Longitudinal feed:
0.043–0.653 mm/rev
Number of longitudinal feeds: 48
Cross feed 0.015–0.206 mm/rev
Number of cross feeds: 48
Metric thread pitches: 0.4–7 mm/rev
Number of metric thread pitches: 42
Imperial thread pitch: 70–4 TPI
Number of imperial thread pitches: 42
Maximum tool shank height: 16 x 16 mm
Tailstock taper: MK 3
Tailstock quill stroke: 130 mm
Quill diameter: Ø 45 mm
Dimensions L x W x H: 1920 x 740 x 1555 mm
Weight: 750 kg

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.