Mostna dvigala (overhead crane)

Omis 2x20 ton

Stanje: rabljeno, Leto izdelave: 2004, Suhi v epoksi zalit distribucijski trifazni transformator, proizvajalec TESAR Italija, leto proizvodnje 2004, moč 2500 kVA, napetostni razmerje 20 (2x±2,5%)/0,4kV, AN-AF (prisilno prezračevanje, stalna preobremenitev 30 %), Dyn11, uk=6 %, IP00, standardne izgube, delujoč, popolna dokumentacija in kosovni protokol. Nlodpfx Agewpb Etsxsa

Stanje: novo, NEW PROFESSIONAL BLAST CLEANING MACHINE, CONTRACOR EQUIPMENT, Nledpfxjkht Dvs Agxja PRESSURE VESSEL MANUFACTURED BY KOMNINO (POLAND), THE SANDBLASTER INCLUDES: - 200L PRESSURE POT - COMPLETE SET OF HOSES - DISC-TYPE ABRASIVE DOSING VALVE - NOZZLE OF YOUR CHOICE: 6.5 MM, 8 MM, 9.5 MM, 11 MM, 12.5 MM - PROTECTIVE HELMET WITH APRON - UDT TECHNICAL DOCUMENTATION WE CAN ALSO MATCH A SCREW COMPRESSOR, PRESSURE VESSEL, AND REFRIGERATION DRYER TO THE SANDBLASTER.

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank capacity: 300l. Machine dimensions (L/W/H): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection possible. Nedpfx Ajuwrv Dsgxola

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Crane equipped with: - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control Nlodjqfc Egepfx Agxja - Optional with magnet beam or spreader

Stanje: kot nova (razstavni stroj), Used/refurbished hoist motor for a DH wire rope hoist Nodpfxjh Up U Do Agxola ATTENTION! We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings.

Leto izdelave: 2011, stanje: dober (rabljeno), • Shredding system, single-shaft shredder, shredder, chopper, cutting mill, single-shaft breaker, rotor mill - Shredding system: constructed entirely from stainless steel, suitable for frozen meat or other materials - Motor power: 4 kW Nodpfx Agoh Di H Dsxsla - Speed: approx. 60 rpm - Number of cutting blades: 10 pieces - Blade dimensions: 250 mm - Feed hopper: 500 x 895 x H480 mm - Dimensions: 880/1390/H2060 mm - Weight: 640 kg

Stanje: rabljeno, Leto izdelave: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speed: 3,000 rpm Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y axis): 3,600 mm Njdjxwdygjpfx Agxela Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose (measured from floor, head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse: X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque: X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Stanje: dober (rabljeno), Leto izdelave: 2012, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: SPL PAA 9001.25 Leto izdelave: 2012 CNC krmiljenje Delovno območje: 2.500 x 9.000 mm Nedpfx Asu U Hm Aegxola 1 plazemski gorilnik z napajalnikom Kjellberg HiFocus 280i 2 avtogeni gorilniki na propan Vibracijska miza Beuting Filtracijska naprava Donaldson DFPRO12 za zunanjo postavitev 16426ä

Stanje: generalkompletno obnovljen (rabljeno),

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic Kasto band saw system is available. Cutting range at 90°: Round material: 530mm, Square material: 530mm x 530mm, Flat material: 530mm x 640mm. Saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (X/Y): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation is available. On-site inspection is possible. Nlodpjv S E Edofx Agxja