Brusilni stroji - površinski

OKAMOTO ACC-64DX

Stanje: rabljeno, Leto izdelave: 2015, Krmiljenje Grind-X Teža stroja ca. 2900 kg Velikost delovne mize: 650x400 mm Pomik delovne mize: 750x340 mm Hjdpfx Agoyiu Sxsxjl Brusilni kamen: 305x38x127 mm Hitrost brusilnega kamna: 1800 vrt/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, teža obdelovanca (maks.): 200 kg, skupna višina: 2.372 mm, skupna širina: 1.731 mm, skupna dolžina: 1.000 mm, širina mize: 630 mm, poteza s peresom: 250 mm, dolžina mize: 400 mm, dolžina obdelovanca (maks.): 800 mm, širina obdelovanca (maks.): 500 mm, višina obdelovanca (maks.): 265 mm, GF AgieCharmilles FORM 20 Leto izdelave: 2017 Krmiljenje: AC-FORM HMI Potovalne poti: X=350 mm, Y=250 mm, Z=250 mm Maks. velikost obdelovanca: X=800 mm, Y=500 mm, Z=265 mm Maks. teža obdelovanca: 200 kg Hodpexf Dvqsfx Agxsl Maks. teža elektrode: 50 kg Razdalja med mizo in vpenjalnim vpenjalom: 230 - 480 mm ISPG generator - delovni tok 80 amperov Najboljša dosegljiva površina Ra 0,1 µm Linearni stekleni merilniki z ločljivostjo 0,05 µm Vključno s pnevmatskim vpenjalnim vpenjalom Erowa ITS 50 Vključno s štiri-pozicijskim menjalcem elektrod v magazinu Neto teža stroja: 2000 kg Dimenzije stroja (D x Š x V): 1000 x 1731 x 2372 mm Stroj bo po prejemu naročila očiščen, servisiran in nato preizkušen. Po želji vam napravo tudi zagonimo.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: Hjdpouxft Esfx Agxol - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: zelo dobro (rabljeno), Weiler Primus VC Precision Centre Lathe with 3-axis HEIDENHAIN digital readout (new generation) with VC drive, stepless speed control, and CE certification, in geometrically as-new condition Technical Data: Year of manufacture: 1999 Machine No.: 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short-taper spindle nose to DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Tailstock quill travel: 40 mm Longitudinal feeds: from 0.02 to 0.63 mm/rev Cross feeds: from 0.005 to 0.2 mm/rev Metric threads: from 0.25 to 8 mm Module threads: from 0.2 to 4 mm (19 positions) Weight: approx. 800 kg Hodpfx Agjyglk Hoxel Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories & Features: - 3-axis HEIDENHAIN digital readout (newer generation) - RPM display - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Spindle brake switchable - Operating manual - Machine lamp This machine originates from a vocational school and is in exceptional, near-mint condition. Thanks to its safety equipment and renowned WEILER precision, the machine is ideally suited for training purposes as well as for tool and machine construction. Note to all private buyers: The machine price is well into the five-figure range.

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Hjdpfsu Sbkgsx Agxjl Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: used, very good, as new, incl. new service and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guide length: 350 mm Bed width: 205 mm Tool cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Hjdpfsx Ivy Njx Agxsl Spindle nose to ISO DIN 702-3 (DIN 55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: 50 metric Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight, without packaging and accessories: approx. 1150 kg Dimensions (L x W x H), net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety guard: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Hodpfoxizdaox Agxsl Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Workpiece probe Tool measurement Laser tool control (optional) High-pressure coolant supply 7 MPa (optional) Chip conveyor Fully enclosed with roof Dimensions: n/a Weight: n/a Connection data: n/a

Stanje: novo, Leto izdelave: 2026, Swing diameter over bed 554 mm Swing diameter over cross slide 370 mm Turning length 2000 mm Centre height 280 mm Spindle bore 104 mm Drive power 11 kW - New machine - with 2-axis ACU-RITE digital readout including constant cutting speed, MULTIFIX quick-change tool post size MC Hodpfx Agewyd Tnjxol * For more information about the exact standard specification and available options, please visit our website or contact us directly *

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Hsdpfx Ash Hvk Aogxol Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 510 mm, premer struženja: 300 mm, izvrtina vretena: 61 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – Year of Manufacture 2019 – Excellent Condition, Ready for Operation! For sale is a Doosan LYNX 2100LMA CNC turning center, a high-performance machine for the precise machining of rotational parts such as shafts, cones, spheres, as well as internal and external threads. The machine is in excellent technical condition, available immediately, and ready for inspection. Key features: - High precision and reliability for both series and single-part production - Large turret with 24 tool stations (including driven tools) - Control system: SIEMENS Sinumerik 828D - Powerful spindle and driven tools for maximum productivity - Spindle bore diameter of 61 mm enables the machining of a wide range of workpieces Technical specifications: Hedoyftatjpfx Agxol - Year of manufacture: 2019 - Max. turning length: 510 mm - Max. turning diameter: 300 mm - X-axis travel: 210 mm - Z-axis travel: 560 mm - Swing over bed: 600 mm - Swing over tailstock: 400 mm - Spindle bore: 61 mm - Max. bar diameter: 51 mm - Max. spindle speed: 6000 rpm - Number of turret tools: 24 (including driven tools) - Control system: SIEMENS Sinumerik 828D - Dimensions (L x W x H): 2805 x 1582 x 1693 mm - Weight: 3500 kg The machine is fully operational, currently connected to power, and available for viewing.