Cev, brusilni stroji

NS Maquinas ML75 ab € 9.900,--

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Fsdpfxoiffwqo Abvofw Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Fedpfxod Ev Upj Abvefw Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams Fedpfx Aodzqblobvefw For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), 1 used low-pressure steam boiler ----- Manufacturer : LOOS, Gunzenhausen Model : U-ND Capacity : 800 kg/h Perm. operating overpressure : 1 bar Test pressure (elevated) : 2 bar Total volume : 1,108 l Fjdpfenp Hwkox Abvefw Year of manufacture : 2004 CE marking : 0036 Equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, gas control section, control cabinet with touch panel, and all existing coarse and fine fittings. Boiler body dimensions approx.: Diameter incl. insulation : 1,230 mm Width : 1,450 mm Transport height : 2,200 mm Length : 1,940 mm Overall length incl. burner: 2,700 mm 1 used feed water module ----- Manufacturer : Loos, Gunzenhausen Model : WSM Capacity approx. : 800 l With control cabinet, sample water cooler, 2 dosing vessels

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Control system: FANUC Fjdpfxou Hag No Abvofw Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Ffedpfx Aod Ixadobvow The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, prevoženi kilometri: 19.950 km, prva registracija: 11/1989, vrsta goriva: dizel, konfiguracija osi: 4x4, vrsta prenosa: mehanski, Leto izdelave: 1989, Oprema: pogon na vsa štiri kolesa, Mercedes-Benz 1428 AF 4x4 (center and rear axle differential locks, low-range gearing) with 7 seats Water tank: 2,500 liters Pump: Metz with 2,800 l/min capacity Ffsdpfsfarx Usx Abvew Additional equipment: Rapid intervention hose reel on right side with 50-meter hose Dimensions (LxWxH): 7,100 x 2,300 x 3,000 mm Wheelbase: 3,800 mm Tires: 275/70 R22.5

Stanje: dober (rabljeno), Leto izdelave: 2013, skupna masa: 1.519 kg, moč: 75 kW (101,97 KM), volumenski pretok: 14,85 m³/h, tlak (maks.): 12,8 letvica, Kompresor zraka Atlas Copco GA75VSD FF Tehnični podatki Fodpfx Abjxk U Alovsfw Proizvajalec: Atlas Copco Airpower Tip: GA75VSD FF Leto izdelave: 2013 Maksimalni tlak: 12,8 bar Dovod zraka: 14,85 m³/min Moč motorja: 75 kW Hitrost motorja: 3000 vrt/min Teža: 1519 kg Napajanje: 400 V 50 Hz 3 faze Izvedba: vijačni kompresor z oljnim vbrizgom Upravljanje: elektronska upravljalna plošča Izvor: izdelano v Belgiji Za točnost, popolnost in ažurnost podatkov ni zagotovila.

Stanje: novo, Timesavers Series 12 WW The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding—to remove heavy burrs and splatter—and Station 2 to achieve a surface finish on the part. The conveyor carpet transport speed is infinitely adjustable. The table opening can be adjusted from 0.8 to 100 mm. Fedpfxjwqf U Uj Abvofw

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. Ffedpspugwijfx Abvsw The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.