Paleta

NNN PD-15

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator Cjdpfx Agjilqvrsqjgw - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: zelo dobro (rabljeno), Soco avtomatski lepilnik za škatle / zapiralec škatel Model T55 Primeren za škatle naključnih dimenzij Cgjdpfshvr Afex Agqjw Zgornja in spodnja lepilna glava Nastavljive noge po višini Popoln s dovodnimi in izhodnimi gravitacijskimi valjčnimi transporterji V odličnem stanju Dostava lahko organiziramo po dogovoru.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring Cgedpfx Agjg Ezareqow - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Cgodpfodmn E Hjx Agqjw

Stanje: rabljeno, Leto izdelave: 2022, Kartonirka vključno z napravo za vroče lepljenje. Naprava ima malo obratovalnih ur. Primerna je predvsem za izdelke, ki jih je mogoče vstaviti v karton s strani. Cedpfjvb E Evex Agqsgw

Leto izdelave: 2010, stanje: dober (rabljeno), 2250-mm pallet nailing line Cgodpfx Aspy H Erjgqew Semi-automatic nailing table Turner + (optional marker) Stacker (maximum 3000 mm) Transfer

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201502530269, merilno območje os X: 700 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 600 mm, obremenitev mize: 560 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: ZEISS Contura G2 coordinate measuring machine with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT T1 scanning head. The device comes from a controlled laboratory environment, used exclusively on-demand on a single shift, and never integrated into a production line – resulting in exceptionally low actual running hours and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Commissioning: 2016 Technical and visual condition: perfect Measurement error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning head ✅ Probe rack/magazine ✅ Set of measurement styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control panel Cgsdpfx Ageyzmbdsqow 🔹 Usage History Device operated exclusively in laboratory mode Occasional, project-based use (on-demand) Single shift, no serial or production operations As a result, the machine exhibits extremely low mechanical wear 🔹 Service & Calibration ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance according to manufacturer’s guidelines ✅ No third-party interventions ✅ Fully functional device 🔹 Status 📍 Device available immediately 🔍 Demonstration possible 📄 Complete documentation ✅ Transport to be arranged by the purchaser

Stanje: rabljeno, Leto izdelave: 1995, Cutting diameter: 260 mm Saw band length: 3830 x 27 x 0.9 mm Cutting range (flat): 310 x 260 mm Cutting range (square): 260 x 260 mm Cutting speed, stepless: 19-110 m/min Feed length: 750 mm Multiple feed length: 6750 mm Material support height: 700 mm Machine weight: approx. 1.4 t Dimensions: approx. 2100 x 2300 x 1720/1300 mm Incl. various saw bands Cgodpfx Agewhqxmjqew Incl. chip conveyor

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels Cedpeuc Idxsfx Agqsgw

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) Cgjdol Uyfkepfx Agqow - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016