Stranska zavesa

Nissan Atleon 210 / Manual / full steel suspension / 7...

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: bež, moč: 513 kW (697,49 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 408 kW (554,72 KM), nazivna (navidezna) moč: 510 kVA, neprekinjena moč: 368 kW (500,34 KM), skupna dolžina: 4.460 mm, skupna širina: 1.606 mm, skupna višina: 2.493 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Doosan, vrsta hlajenja: voda,

Stanje: novo, prevoženi kilometri: 100 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new MAN 26.440 TGX 6x2-4 LL, configured as a transporter for construction machinery and aerial work platforms. Truck Specifications: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Warning beacons - Reversing camera - Multifunction steering wheel - 1 bunk bed - Refrigerator - Media system with navigation - Flatbed body – 100 km – 324 kW (441 hp) - Internal combustion engine Cjdpfx Afst T H Skodsrd - Diesel, automatic - Euro 6e – 4 (green emissions badge) - 26,000 kg GVW - Automatic climate control - White – Long-distance specification – etc. Body - Structure made from laser-cut and folded special profiles in low-bed design - Platform length approx. 8,850 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed section and 1 extendable section, ramps laterally adjustable - Ramp deck made of grid flooring, mechanical ramp locking including holder on outer frame when not in use (optional securing with straps) - Ramps powered by electro-hydraulic unit, including emergency operation on control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions controlled via remote control - Grid floor with increased load capacity - Rear with bevel – front bulkhead approx. 2,000 mm high with profiles bent inward - Stainless steel toolbox inside, in front of the bulkhead - 2 stainless steel toolboxes mounted laterally on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear wall of cab, 2 pairs on sides of frame, 2 pairs at rear - 2 steps for access to the cargo area Load Securing: - Longitudinal member incl. Multi-X contour with lashing points, 2.5 t - 6 pairs of 6 t lashing points integrated into the longitudinal member - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points in the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points below, in front of the front toolbox Painting: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grid flooring hot-dip galvanized Markings: - Reflective tape according to EU standards, on sides and rear. Further information available upon request.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2198535, skupna masa: 2.409 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: rdeča, moč: 160 kW (217,54 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 160 kW (217,54 KM), nazivna (navidezna) moč: 220 kVA, neprekinjena moč: 160 kW (217,54 KM), neprekinjena (navidezna) moč: 220 kVA, skupna dolžina: 3.300 mm, skupna širina: 1.200 mm, skupna višina: 1.970 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 42,1 l/100 km, poraba goriva (mestna vožnja): 24 l/100 km, poraba goriva (izven mesta): 32,87 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 600 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.970 mm, dolžina elektro omare: 3.300 mm, širina krmilne omare: 1.200 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 200 KVA generator is a reliable and versatile solution for temporary and long-term power requirements in a wide range of environments. This genset is ideal for mobile use and complies with Stage V emission standards. The efficient FPT/Iveco engine, combined with a Stamford generator, delivers outstanding performance with low operating costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emissions, making it perfect for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external sockets with circuit breakers for added safety. With a 600-litre fuel tank, the generator offers an autonomy of up to 14 hours under continuous load. The system operates on diesel, HVO or GTL fuel, providing flexible fuel options. Technical Specifications: - Model: Bredenoord 200 KVA - Nominal Power: 220 KVA - Maximum Power: 220 KVA - Engine: FPT/Iveco NEF67TM7 - Generator: Stamford brushless alternator (AVR) - Output: 220 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 metres - Fuel tank: 600 litres - Autonomy: - 100% PRP: 14 hours - 70% PRP: 18 hours - Engine power: 160 KW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2409 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 42.1 L/h - 70% PRP: 32.87 L/h - 50% PRP: 24 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound attenuation: Csdpfx Afowf Nkcjderd The generator is designed with optimised air intakes and special insulation materials to minimise noise. The sound insulation is reinforced with wool of varying thickness to dampen sound across a wide frequency spectrum, making it ideal for use in noise-sensitive areas. Durability: The enclosure is corrosion-resistant thanks to a coating tested for more than 2000 hours (C5I-H), guaranteeing a long service life even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward transport on construction sites. The design provides a stable and secure relocation without risk of damage. Customisation: The Bredenoord 200 KVA generator is available in various outputs from 20 KVA to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to specific requirements and applications. Certifications: - CE certified - Made in Europe Fields of Application: The generator is suitable for various sectors, including construction, industry and other areas where reliable and efficient power supply is required.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2201925, skupna masa: 2.263 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: rdeča, moč: 112 kW (152,28 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 112 kW (152,28 KM), nazivna (navidezna) moč: 150 kVA, neprekinjena moč: 112 kW (152,28 KM), neprekinjena (navidezna) moč: 150 kVA, skupna dolžina: 3.300 mm, skupna širina: 1.200 mm, skupna višina: 1.970 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 32,5 l/100 km, poraba goriva (mestna vožnja): 16,17 l/100 km, poraba goriva (izven mesta): 22,77 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 600 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.970 mm, dolžina elektro omare: 3.330 mm, širina krmilne omare: 1.200 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 140 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements in various environments. This unit is ideal for mobile applications and complies with Stage-V emission standards. The efficient FPT/Iveco engine, in combination with a Stamford generator, ensures excellent performance and low operating costs. The generator is housed in a sound-insulating canopy, ensuring minimal noise emissions, making it perfectly suited for noise-sensitive environments (super silent). The enclosure features thick, oil-resistant acoustic insulation and external sockets with circuit breakers for enhanced safety. Equipped with a 600-liter fuel tank, the generator offers up to 18 hours of autonomy during continuous operation. The system runs on diesel, HVO, or GTL fuel, allowing for flexible fuel options. Technical Specifications: - Model: Bredenoord 140 KVA - Nominal output: 150 KVA - Maximum output: 150 KVA - Engine: FPT/Iveco NEF67TM3A - Generator: Stamford brushless alternator (AVR) - Power: 150 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1,500 rpm - Sound level: 68 dB(A) at 7 meters - Fuel tank: 600 liters - Autonomy: - 100% PRP: 18 hours - 70% PRP: 26 hours - Engine power: 112 kW - Battery charger and engine heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2,263 kg - Emission class: Stage-V Fuel consumption: - 100% PRP: 32.5 L/h - 70% PRP: 22.77 L/h - 50% PRP: 16.17 L/h Options: - Engine heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound Attenuation: The generator is engineered with optimized air inlets and specialized insulation materials to minimize noise. The acoustic insulation is reinforced with wool of varying thicknesses to reduce noise across a wide frequency range, making it ideal for use in sensitive areas. Durability: The canopy is corrosion-resistant thanks to a special coating tested for over 2,000 hours (C5I-H), ensuring a long service life even in the harshest conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree incline to prevent water accumulation and minimize oxidation. Transport and Mobility: Credpewfgd Hjfx Afdod The generator is easy to move, featuring reinforced lifting eyes and steel beams to allow for effortless transport around job sites. The design ensures stable and safe relocation without risk of damage. Customer-Specific Customization: The Bredenoord 140 KVA generator is available in various models, from 20 KVA to 600 KVA. Customer-specific modifications are possible, enabling the unit to be tailored to individual requirements and applications. Certifications: - CE certified - Made in Europe Applications: This generator is suitable for a range of sectors, including construction, industry, and other applications where reliable and efficient power supply is required.

Stanje: rabljeno, prevoženi kilometri: 656.000 km, moč: 220 kW (299,12 KM), prva registracija: 12/2007, vrsta goriva: dizel, število sedežev: 49, vrsta prenosa: samodejen, emisijski razred: Euro 5, zavore: retarder, Leto izdelave: 2007, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, * Mercedes Benz O 530 zgibni avtobus * Prva registracija: 12-2007 * EURO 5 EEV * Avtomatski menjalnik * Retarder Crsdpfeyq Da Ujx Afded * Voznikova klimatska naprava * Parkirno gretje * Število sedežev: 49 * Klančina za invalidski voziček * Več slik in videov preko WhatsApp * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: dober (rabljeno), Kód: 0253 Značka: LARI E LARI - ITÁLIE Model: FR 20 - TA - CE Standard Obráběcí centrum pro frézování a vrtání dřeva, plastů a kompozitních materiálů, dřevěných dveří, okenních rámů – standard CE Technické údaje: Pojezd v ose X: 3250 mm Pojezd v ose Y s frézou 90°: 130 mm Pojezd v ose Z s frézou 0°: 290 mm Pojezd v ose Z s frézou 90°: 175 mm Pracovní rychlost v ose X: 40 m/min Pracovní rychlost v ose Y: 30 m/min Pracovní rychlost v ose Z: 30 m/min Jednotka pro vrtání a vkládání závěsů: Typ: samčí/samice Regulace otáček frekvenčním měničem Sonda Upínací pouzdro ER 25 Výkon vřetene pro vrtání pantů anuba: 2,2 kW Nastavení sklonu vřetene pro vrtání pantů anuba: -10° až +90° Frézovací elektrovřeteno: Výkon: 2,7 HP při 18 000 ot./min Upínací kleština ER 32 Plynulá regulace otáček frekvenčním měničem Nastavení sklonu od 0° do 90° pro svislé i vodorovné obrábění Řídící počítač: CNC – operační systém Windows XP – barevný monitor – alfanumerická klávesnice – USB port – interpolace Codpfx Aex A Hdxefdjrd Pracovní stůl se 3 posuvnými upínači pro fixaci obrobků Instalovaný příkon: 12 kW Průměr odsávacího hrdla: 120 mm Stlačený vzduch: 7–8 bar Rozměry pro přepravu: 4100 × 1500 × 2100 mm (výška) Hmotnost stroje: 1400 kg Hmotnost rozvaděče: 250 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta laserja: vlakenski laser, laserska moč: 3.000 W, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Delovno območje (mm): 3048×1524 Pomik osi X (mm): 1524 Pomik osi Y (mm): 3048 Pomik osi Z (mm): 80 Natančnost pozicioniranja osi X/Y: ≤0,03mm/m Natančnost ponovnega pozicioniranja osi X/Y: ≤±0,02mm Največja sintezna hitrost pozicioniranja: 150m/min Maksimalno pospeševanje: 1,2G Širina reza: 0,1mm-0,5mm (za plošče tanjše od 3mm) Hrapavost rezalne površine: Ra3,2um-Ra25,4um (za plošče tanjše od 3mm) Tlorisni prostor (mm): 6000*3000 Dimenzije glavnega ogrodja (mm): 5000*2300*1800 Crjdpfxoxvwcxj Afdod Velikost zaslona: 21" LCD Prenos: zobatiški pogon z dvojnim pogonom Nosilnost mize: 1,1 tone

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 1.280 mm, skupna širina: 980 mm, skupna višina: 2.200 mm, Certificirano po DGUV do: 06/2027, Etažna peč Wachtel Piccolo 1-4 TOP električna etažna peč za 4 pekače 600x800 mm DMS 2 upravljanje z nočnim zagonom Rastna omara & odsesovalna napa Priklop: 400V, vtikač 16A-CEE Mere: 980 x 1280 x 2200 mm (ŠxGxV) Peč na kolesih Rabljena peč Opcije: Vodeni filter Csdpsytl Hnjfx Afdjrd Pekači Reduktor tlaka Vzdrževalna pogodba Dostavna služba Uvajanje & zagon Več pekarskih peči najdete v naši veliki razstavi!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 10 km, emisijski razred: Euro 3, Leto izdelave: 2025, Dimensions of the dump body: • Length / internal: 5,320 mm • Width / internal: 2,250 mm • Height / internal: 1,670 mm • Volume: approx. 20 m³ Material / thickness • Floor: HARDOX / 6 mm • Side walls: HARDOX / 5 mm • Body weight: approx. 4,500 kg Sideboard operation: • Side boards: fixed • Rear board: mechanical, swinging Hydraulics and control Cedpfx Asyuymrsfderd • Tipping mechanism: by hydraulic telescopic cylinder located under the front of the body • The hydraulic pump is driven by the vehicle’s power take-off (PTO) • Control of tipping function: the body is operated via a joystick in the driver’s cab • Manufacturer of the complete hydraulic system: INTERPUMP HYDRAULICS PENTA Equipment/features: • Extension for asphalt discharge • Folding ladder for body access • Rear lighting protected by guard grille

Stanje: rabljeno, številka stroja/vozila: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimised for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletising. The configuration is non-combi and features a separate blow moulder upstream of the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottles Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow moulding and filling systems) Main components and years of manufacture: - Sidel Universal SBO 14 blow moulder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeller (2011) - Zambelli shrink wrapper (2004) - Handle applicator (2004) - ACMI double-head palletiser (1992) Advanced Automation and Control Systems The line benefits from a modernised conveyor and control system, with conveyor management and electrical control cabinets upgraded in 2010–2011. This update improves module synchronisation, enhances safety interlocks, and ensures stable high-speed performance across blowing, filling monoblock, labelling, and packaging stages. - Upgraded conveyor control and electrical panels in 2010–2011 - Integrated safety interlocks for secure, high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Line Integration Capabilities Cedpfoyk E Srex Afdsrd Designed as a complete production solution for water bottling, this used line offers seamless integration from blow moulding to end-of-line palletising. The non-combi layout allows independent operation and optimisation of the blow moulder and filling monoblock, making format changes and maintenance manageable without stopping the entire line. Inline flow: Blow moulder → Filling monoblock → Labelling → Shrink wrapping → Handle application → Palletising Conveyor system upgraded for reliable accumulation and product transfer Suitable for carbonated and still water in PET Machine Condition and Maintenance History This used bottling line has benefited from targeted upgrades of the conveyor management and electrical control cabinets, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally built in 1988 but fully overhauled in 2025 to ensure maximum operational reliability. The line is sold in operational condition as a ready-to-use industrial packaging solution. - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 - Conveyor and electrical control cabinets upgraded: 2010–2011 - Well-known OEM components throughout the line - Operational with existing 0.5L PET format