Netstal 870/1500 HP

NETSTAL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 82.489 h, vpenjalna sila: 1.500 kN, Hydraulic injection moulding machine from the year 2000. This Netstal Synergy 1500-460 features a clamping force of 1,500 kN and an injection force of 279 kN. It offers a mould opening stroke of 0-450 mm and a mould height adjustment range of 400-700 mm. If you are looking for a high-quality injection moulding machine, you should consider the Netstal Synergy 1500-460, which we are offering for sale. Please contact us for further details. • Hydraulics and clamping unit • Operating pressure: 210 bar • Injection force: 279 kN • Mould opening stroke: 0-450 mm • Mould height: 400-700 mm • Electrical supply • Supply 1 (3L+PE) • Rated voltage: 400 V / 50 Hz • Rated current: 63 A • Motor protection: 55 A • Motor power: 30 kW • Cable cross-section: 16 mm² Cgedpfxsy Dr Tdo Ahxst • Data on nameplate: Rated current 55 A; rated power 30 kW • Supply 2 (heating/control) (3L+N+PE) • Rated voltage: 400 V / 50 Hz • Rated current: 100 A • Total connected load (heating/control): 67.6 kW • Cable cross-section: 35 mm² • Nameplate data: Rated current 97.7 A; rated power 67.6 kW • Control voltages • AC: 230 V • DC: 5 V / ±15 V / 24 V • Auxiliary units and drives • Oil filter motor: 400 V / 0.6 A • Central lubrication (slow): 400 V / 0.9 A • Central lubrication (fast): 400 V / 3.0 A • Central lubrication (F110): 230 V / 1.0 A / 0.10 kW • Heating/plasticizing and outlets • Plasticizing 1: 230 V / 20.9 kW • Plasticizing 2: 230 V • Mould heating: 230 V • Sockets: 230 V / 57.7 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Arburg 270 M-350-90 U Schließkraft: 35 t Baujahr: 1997 Schneckendurchmesser: 25 mm Cedpfx Aeg S I S Aehxjgt Holmenabstand: 270 x 270 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 600.230 h, vpenjalna sila: 600 kN, skupna masa: 6.300 kg, Hydraulic injection moulding machine from 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It operates at a working pressure of 210 bar and provides an opening stroke of 0-350 mm. If you are looking for a high-quality injection moulding machine, the Netstal Synergy 600-230 we offer for sale is worth considering. Please contact us for further details about this machine. • Operating pressure: 210 bar • Injection pressure: 150 bar • Injection force: 182 kN • Opening stroke: 0-350 mm • Tool mounting height: 200-500 mm • Protection rating: IP54 • Power supply 1: 3PH+E, 400 V, 50 Hz • Rated current supply 1: 29 A • Short-circuit current (supply 1): 20 kA • Power supply 2: 3PH+MP+E, 400 V, 50 Hz • Rated current supply 2: 120 A • Short-circuit current (supply 2): 20 kA Cgodpfx Ahey Dr Nfoxot • Pump motor power: 15 kW • Heating capacity: 13.66 kW • Total connected load: 65.1 kW • Total connected load (alternative): 62.4 kW • Socket F11: 400 V, 9 A • Socket F12: 230 V, 20 A • Socket F110: 230 V, 10 A

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 5.797 h, vpenjalna sila: 800 kN, premer vijaka: 40 mm, skupna širina: 2.042 mm, skupna višina: 1.711 mm, skupna masa: 8.200 kg, največja dolžina izdelka: 4.545 mm, This Netstal Elion 800-270 was manufactured in 2021. It is equipped with a robust AXOS control system and a high-speed injection unit boasting an injection speed of 450 mm/s. The machine features a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a mold installation height range of 200–500 mm and is fitted with a Euromap 67 robot interface. If you are looking for a high-quality injection molding machine, the Netstal Elion 800-270 we are offering for sale is a strong candidate. Please contact us for further information. Additional Information Includes Wittmann Primus 16T robot Travel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm 5 kg payload Control: Wittmann CNC8, software Primus R8.3R8 Teachbox Touch Vacuum circuit with additional 5/2-way valve • Injection unit: 270 Powermaster with injection speed up to 450 mm/s • Screw diameter: 40 mm, type B, 3-zone screw • Nozzle type: Pneumatically actuated needle shut-off nozzle with additional heating zone • Minimum installation height: 200 mm • Maximum installation height: 500 mm • Clamping force: 800 kN • Hydraulic power unit: Fully integrated, 9 kW, with 140 bar operating pressure • Pneumatics: 1 air valve up to 890 liters, 1 additional air valve up to 890 liters Codox D Rlpopfx Ahxsgt • Safety cover design: Lockable doors, top-mounted • Operator identification: User recognition via PIN • EUROMAP 67: Standard + dynamic robot interface • Interfaces: Color dosing, freely configurable DIO: 4x outputs / 2x inputs • Mold monitoring: Available on DFP • Power fluctuation compensation: UPS available Extras Socket box: 1:X2510, Cekon, 16A/400V, 3P-N-PE via HS X2511, Cekon, 16A/400V, 3P-N-PE via HS X2512, Cekon, 16A/400V, 3P-N-PE via HS X2513, Cekon, 16A/400V, 3P-N-PE via socket contactor (function 0060) Sockets for color feeders: 1X2507 / 1W7145, Schuko 10A/230V, 1P-N-PE, via HS 1X9507 / 1W9507, Schuko 10A/230V, 1P-N-PE, via HS Mounting of sockets and base housings on brackets 110.180.6902 (function 0060) 1X3123, Zone 12 HAN 4A screwable, power only 1X9123, Zone 12 HAN 4A screwable, sensor only (function 0110) Pneumatics 1: 1x 3/2-way valve 890L, mounted on DAP, W2008 (function 0470) Pneumatics 9: 1x 3/2-way valve 890L, mounted on BAP, W2016 (function 0470) Cooling water 1: X4051 W9088 Flow measurement B1135 – B1138 (return), Pressure measurement B1211 (supply) X4060 W9260 HAN16E Temperature measurement B0801 (supply), B0832 (return) (function 0490) Cooling water 2: X4050 W9086 Flow measurement B1147 – B1150 (return), Pressure measurement B1212 (supply) X4059 W9259 HAN16E Temperature measurement B08813 (supply), B0814 (return) (function 0490) Dosing 1C: 1x vacuum loader and 1x color dosing 1X2018/1W7146, HAN 4A for color dosing 1X9191/1W9946, HAN 3A for vacuum loader Mount sockets and base housing on bracket 110.180.6902 (function 0550)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: rabljeno, Leto izdelave: 1950, Tlak 120 t Povratna sila 20 t Hod bata 500 mm Vgradna višina 600 mm Uporabna velikost mize 800 x 800 mm Dimenzije D-Š-V pribl. 2,55 x 1,14 x 3,34 m Teža pribl. 3,5 t Po naši oceni je stroj v dobrem rabljenem stanju in si ga je mogoče po dogovoru ogledati pod napetostjo. Priključki, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter posredna prodaja so pridržane! Csdpfx Ahjx Sr Evoxogt

Stanje: dober (rabljeno), Leto izdelave: 2001, NETSTAL S 6000-5500E Injection Moulding Machine Basic Information Manufacturer: Netstal Model: S 6000-5500E Year of manufacture: 2001 Operating hours: 88,933 h Clamping Unit Clamping force: 6,000 kN Platen dimensions (H × W): 1,620 × 1,550 mm Tie bar clearance (H × W): 1,020 × 1,020 mm Minimum mould height: 500 mm Maximum mould height: 1,000 mm Maximum mould opening: 1,950 mm Centring ring diameter: 160 mm Maximum ejector stroke: 280 mm Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Shot weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions & Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Optional ESS Energy Saving System The machine can be equipped with a modern ESS (Energy Saving System) servo drive, which improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adapting the motor speed to current production cycle demands. As a result, electrical energy is drawn only when the machine actually requires it. ESS System Benefits - Reduction of electrical energy consumption by up to 30% - Servo drive technology for hydraulic pumps - World-class, proven technology used in the plastics processing industry - Reduction of energy losses during idle running - Lower heating of the hydraulic system - Extended service life of hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system enables significant reduction of machine operating costs while maintaining full production parameters. Codpeyugcgefx Ahxegt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, številka stroja/vozila: 1005/40200317/2010, barva: siv, Perfect machine in every respect, ready for immediate production. Composed of: - Drawer-style feeder Cgedpouxmliefx Ahxjt - 3 sheet feeders, including: - 1 with launch discs - 1 double-feed unit for simultaneous double insert feeding - 1 pivoting unit (90 degrees) for in-line insert feeding in the direction of travel - Gluer combined with electronic labelling machine for address insertion from 1 to 4 inches, 2 to 4 tracks, also suitable for bank statements - Packaging machine equipped with film tensioning system for minimizing bag slack - Stacker for product collection and counting, with side ejection and mechanical outfeed conveyor.

Stanje: dober (rabljeno), Leto izdelave: 2012,

Stanje: dober (rabljeno), Leto izdelave: 2014, For sale are two identical injection molding machines from Netstal, model SynErgy 2000-230/110. The machines were in production up to the last day. The company from which these machines originated places great importance on maintenance and servicing, which is why the machines are in very good condition. 2K function Rotary table Specification Netstal SynErgy 2000 Clamping force in kN 2000 Drive power in kW 45 Year of manufacture 2014 Operating hours 20,209 Weight 13,300 kg Length 6,901 mm Width 2,075 mm Height 2,240 mm plus 800 mm Flow Box Cylinder size AG1 20 mm Cylinder size AG2 16 mm _____ Specification Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year 2014 _____ Additionally available: Robot Krauss–Maffei MH 50 Model 6-axis: Yaskawa Type: DX 100 Operating hours approx. 8,900 Year 2014 The units can be purchased as a complete package or individually. Codpskwb Diofx Ahxsgt Prices are subject to VAT. Viewing by appointment possible. Contact us—our team is happy to assist. Trade-in or exchange possible! Machinery Trading – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Cgodpfxjh Rawbs Ahxot Betriebsstunden: 200

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Injection force: 182 kN Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Available from March 2024. Codpfx Aorfbnmehxsgt Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Prodajamo spodaj navedene, popolnoma delujoče brizgalne stroje NETSTAL MPS: NETSTAL N115/60 MPS leto izdelave 1987 delovne ure 149.000h Cgedpfeyl Umbsx Ahxjt NETSTAL N115/60 MPS leto izdelave 1987 delovne ure 147.000h NETSTAL N115/60 MPS leto izdelave 1987 delovne ure 148.000h NETSTAL N350/150 MPS leto izdelave 1987 delovne ure 131.000h Za več informacij nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Cgodpfxova H Amo Ahxjt Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: pripravljen za uporabo (rabljen), Prodajamo spodaj navedene, popolnoma delujoče brizgalne stroje NETSTAL Synergy: Synergy 600-230 letnik 2016 serijska številka 9N.98107 delovnih ur 60.240h Synergy 800-230 letnik 2000 serijska številka 9N.01091 delovnih ur 96.233h Synergy 1500-460 letnik 2000 serijska številka 9N.01092 delovnih ur 82.489h Cgedpfx Aheyl Twlexet Dodatne informacije, slike in videoposnetke vam z veseljem pošljemo na zahtevo.