Stroj za brizganje

NETSTAL ELION800-270

Leto izdelave: 2021, obratovalne ure: 5.797 h, stanje: pripravljen za uporabo (rabljen), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit with an injection speed of 450 mm/s. The machine is equipped with a 40 mm screw diameter and a fully integrated 9 kW hydraulic power unit. It supports a mold height installation range of 200–500 mm and comes with a Euromap 67 robot interface. If you are looking for a high-quality injection molding machine, you should consider the Netstal Elion 800-270 that we have for sale. Please contact us for further information. Additional Information • Injection unit: 270 Powermaster with an injection speed of up to 450 mm/s Iedpfx Adjx D Rlpekoap • Screw diameter: 40 mm, Type B, 3-zone screw • Nozzle type: Pneumatically actuated shut-off needle nozzle with additional heating zone • Minimum mold installation height: 200 mm • Maximum mold installation height: 500 mm • Clamping force: 800 kN • Minimum mold installation height: 200 mm • Maximum mold installation height: 500 mm • Hydraulic unit: Fully integrated 9 kW hydraulic unit with 140 bar operating pressure • Pneumatics: 1 air valve up to 890 liters, 1 additional air valve up to 890 liters • Safety cover design: Locked doors, top cover • Operator identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retraction Interfaces: Color feed, freely configurable DIO: 4x output / 2x input • Mold monitoring: Available on DFP • Voltage fluctuation compensation: UPS present

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET351P5-offAD-Bypass - 2200373733, hladilna zmogljivost: 66 kW (89,73 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 1.082 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −5 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 11,2 m³/h, tlak črpalke: 4,68 letvica, skupna širina: 866 mm, skupna dolžina: 2.250 mm, skupna višina: 2.054 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass units are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Iasdpewlt Rajfx Adkop Special features: - Open filling system/tank attached - Bypass with manual valve between water inlet and outlet Chilled water outlet temperature adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Max. power consumption (kW): 39 Max. current (A): 68 Starting current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial No.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technically OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to use. (Subject to technical changes and prior sale!)

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Iaedpfx Aorkgy Usdkop Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW Iedpfxsiyyf Io Adkeap By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Isdpfxst Eu Azo Adkjap

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: dober (rabljeno), Leto izdelave: 1999, Dvoranski žerjav, žerjav, električni vitel, ročni pogon, ročni voziček, žerjavna mačka, voziček za mačko, voziček za žerjav, voziček za vožnjo, voziček za nosilec, voziček za visečo progo. - Proizvajalec: Stahl, voziček za žerjav z električnim vitlom - Vitel: tip AS 3016-16 2/1 - Nosilnost: 3.200 kg - Glavno dvigovanje: 8 m/min - Fino dvigovanje: 1,35 m/min - Pogon vožnje: FA-C 3728 133-1 - Hitrost vožnje: 5/20 m/min - Razmik med kolesi: 1.400 mm, mere glejte slike Ijdpfjtlzdqsx Adkeap - Hitrost bobna: 16,0 / 4,0 m/min - Količina: 1 kos vozičkov za žerjav na voljo - Cena: za kos - Transportne mere: 1670/1200/V470 mm - Teža: 462 kg/kos.

Stanje: delavnici obnovljeno (rabljeno), For Sale: EOS P100 – Ready for Immediate Use This EOS P100 has been fully inspected and refurbished, making it ready for immediate deployment in your production environment. Included in the scope of delivery: • 2 build platforms Ijdpfx Aderm Tdwokjap • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Included services: • Transport & Installation: Secure delivery in original EOS packaging as well as professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your specific requirements. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for pre-owned EOS equipment, we stand out for our extensive expertise and unique services. What we offer: • Expert Service: Installation, maintenance, repairs, and upgrades carried out by experienced former EOS technicians. • Exclusive Materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, developed specifically for EOS systems. • Comprehensive Support: From transportation to maintenance plans – we take care of everything. Count on IM3D for reliable machines, premium-quality materials, and the expertise to optimize your SLS production. KNOW WHAT YOU'RE BUYING! Completely refurbished and with warranty! Feel free to contact us for further information or inquiries!

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Iasdpfx Asg Emvhodksp Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: generalkompletno obnovljen (rabljeno), RA250D oxygen version, oil-free assembly and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. We currently have several oxygen vacuum pumps in stock. Isdpfx Aed R Trnodksap