Stroj za brušenje orodij

NESI C350

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Dodpogtm U Aofx Aplocg Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking Dcodpfx Aperqwbijleg • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružniška klop, stružnica z vodilno in pogonsko vreteno, stružnica z vodilno in pogonsko vreteno -Proizvajalec: Strunguri Arad, stružnica z vodilno in pogonsko vreteno tip SNA560x2000 -Dolžina struženja: 2140 mm -Premer struženja nad posteljo: 600 mm Dcsdpfx Apeyaypksljg -Premer struženja nad suportom: 330 mm -Vrtina vretena: Ø 65 mm -Število vrtljajev vretena: 16 - 1600 o/min -Tro-čeljustna glava: Ø 310 mm -Ležišče konjička: MK5 -Pogonski motor: 11 kW -Dodatki: vključeni, glej fotografije -Dimenzije: 3700/1050/H1400 mm -Teža: 3600 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Na voljo je stroj za brušenje navojev in polžev Reishauer AG. Dolžina brušenja: 450mm, vpenjalna dolžina: 700mm, maks. premer brušenja: 200mm, maks. korak: 80mm, maks. teža obdelovanca: 100kg, maks. kot koraka: +/-25°, premer brusilnega kamna: 275mm/350mm, hitrost vrtenja: 1850o/min. Dimenzije stroja X/Y/Z: pribl. 2600mm/1800mm/1600mm, teža: pribl. 3400kg. Vključen je oljni centrifugator, pokrov, sistem za odsesavanje oljne meglice in razna dodatna oprema. Zaščitna zavesa proti brizganju je nekoliko otrdela. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dodpfx Aex Dm Dneplscg

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm Dodpfx Apeh Nvyzolocg -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: skoraj kot novo (rabljeno), Profile grinding machine Utma model P20 Dcodpfx Aoff H E Roplsg

Leto izdelave: 1971, stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Dcedpfxjd Ha E So Aplog Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Mandrel Ø: 508 mm

Stanje: dober (rabljeno), Leto izdelave: 1998, skupna dolžina: 52.000 mm, skupna višina: 17.000 mm, skupna širina: 20.000 mm, skupna masa: 1.600 kg, GHD Hartmann GBK-420 Stroj za pakiranje kruha Kapaciteta: do 60 kosov/min, odvisno od izdelka Stanje: kot je razvidno iz videoposnetka, dobro, vzdrževano. Djdpfx Apotryd Aslocg Frekvenčni pretvorniki, varnostni releji in dodatne električne komponente so bile nedavno zamenjane. Izdelki: Celi hlebi kruha, ne narezani, dolžina do 400 mm, širina do 260 mm, višina do 170 mm. Možno je tudi pakiranje povezanih burger žemljic (do 120 mm).

Stanje: rabljeno, Leto izdelave: 1993, številka stroja/vozila: 931200665, Packaging System - Wrapping & Shrinking Machines BVM SM4012 K-SC4030S Year 1993 - Serial-No. 931200665 Fully automatic packaging machine SM 4012K Max. infeed width: 420 mm Shrink tunnel: SC4030S Dodsh Ax Hfspfx Aplocg Format (width x height): 450 mm x 330 mm 5 m chain gripper infeed Discharge conveyor GUK feeder for single sheets Online video inspection via Skype video We look forward to your visit – more machines available in stock Available immediately – machine can be inspected Located in Emskirchen / Nuremberg – test runs possible

Stanje: rabljeno, Technical Details: Travel path - Y: Slide on beam: 200 mm Spindle mount ISO: SK 40 Spindle head tiltable left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table - spindle bottom end: min./max.: 50 / 400 mm Table clamping surface (mounting area): 760 x 200 mm Table clamping surface (clamping area): 630 x 200 mm Max. table load: 100 kg X travel: table longitudinal: 320 mm Z travel: table vertical: 350 mm Dcodpfsu Ndb Aex Apljg Table tiltable +/-: left/right 30° each Distance table - spindle bottom end: min./max.: 50 / 400 mm Feed:: Table: stepless 14 - 71 mm/min Total power consumption: 4.0 kW Approx. weight: 1,200 kg Machine dimensions (LxWxH): 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital position display for X and Y. Swiveling working spindle. The feed is driven via a variator gearbox. The table is tiltable. Spindle speeds have 3 mechanical gear steps and 2 electrical steps. Coolant system. The milling beam is extendable by approx. 350 mm. The machine vise is a recommendation and is not included in the scope of delivery. It can be purchased optionally.