CNC stružno-rezkalni center

Nakamura-Tome NTJ-100

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Kjdpfox D Iuzsx Ah Ujdu Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 60 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL202140731, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 590 mm, vrsta vhodnega toka: trifazni, skupna višina: 2.145 mm, skupna dolžina: 3.820 mm, skupna širina: 2.081 mm, nos vretena: A2-6, skupna masa: 5.100 kg, CNC stružnice z možnostjo frezanja NLX2000Y-500, Mori Seiki Leto: 2014 Največji premer obdelovanca: 65 mm Natančnost osi C: 0,001 stopinje Krmilnik: MORI M730B Dimenzije stroja: 3820 x 2081 x 2145 mm Masa stroja: 5100 kg Največji premer rezanja: 366 mm Največja dolžina rezanja: 510 mm Moč motorja za frezanje: 5,5/3,7 kW Število vrtljajev pri frezanju: 10000 vrt/min Hitrost podajanja: 30 m/min Moč motorja vretena: 15/11 kW Tip vretena: A2-6 Število vrtljajev vretena: 5000 vrt/min Stožčastost vretena: MT #4 Standardni premer rezanja: 271 mm Največji premer obdelovanca: 923,8 mm Največji premer obdelovanca: 755 mm Gib glave zadnjega konca: 564 mm Premer vretena zadnjega konca: 80 mm Velikost orodja: 25 x 25 mm Kdjdpfszua Egsx Ah Uju Število položajev glave: 12 Gib osi X: 260 mm Gib osi Y: +/- 50 mm Gib osi Z: 590 mm

Stanje: dober (rabljeno), KARDEX SHUTTLE Številka modela: XP-500-2450X813 Izvedba: H/N55/N22D18B/N75D20/20 Dovoljena skupna nosilnost: 2 x 33.200 kg Ksdjzr N H Ijpfx Ah Uedu 28 predelkov Približne mere (Š x V v mm): 2.770 x 7.000

Stanje: rabljeno, Leto izdelave: 2015, CMZ TX 66 Y2 Quattro Leto izdelave: 2015 Nadzorni sistem: Fanuc 31i Največji premer obdelovanca (mm): 255 Razdalja med sredinama vreten (mm): 639 Kdsdpfx Ahjzp Itue Usu Največja hitrost (rpm): 4000 Največji premer palice: 66 mm Os X: 190 mm Os Y: +- 40 mm Os Z: 500 mm Vpenjalna glava: 210 mm 2 glave BMT 55 2 vretena 2 x os Y Prehod vretena: 66 mm Sonda za orodja Izmetalec žagovine Oprema, ki je vključena v stroj Dokumentacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 2.200 kg, moč hladilne črpalke: 180 W, dolžina tračnega lista: 4.570 mm, širina tračne žage: 41 mm, AMADA HFA 400 – Automatic Bandsaw for Metal Kdjdjyc H Ewopfx Ah Uou Serial Production | AMADA Quality | Industrial Grade The AMADA HFA 400 is an automatic horizontal bandsaw designed for metalworking, engineered for precise, repeatable cuts in high-volume production environments. This machine stands out thanks to its compact design, robust construction, and proven AMADA machine tool technology. With a machine weight of 2,200 kg and fully automatic sawing cycles, the HFA 400 is ideally suited for manufacturing plants, service centers, and toolmaking operations. ● automatic bandsaw for metal ● AMADA brand quality ● robust construction – 2,200 kg ● saw motor: 5.5 kW ● industrial-grade hydraulics ● automatic cutting sequences ● high precision and repeatability ● suitable for solid stock and profiles ● durable and reliable design Technical Data ● Model: AMADA HFA 400 ● Type: automatic bandsaw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Saw blade dimensions: - Length: 4,570 mm - Width: 41 mm - Thickness: 1.3 mm ● Mains connection: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2,200 kg ● Year of manufacture: 2012 Condition: used, fully operational, ready for immediate use 📩 Contact us for price and further information.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 10.168 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL254120635, CNC stružnica Proizvajalec: DMG MORI Tip: NLX 2500 SY 700 z avtomatizacijo WH10 Leto izdelave: 2012 Premer struženja: 460 mm Dolžina struženja: 795 mm Krmiljenje: MORI SEIKI M730 BM Premer nad prečnim suportom: 590/360 mm Premer vretena: 80 mm Pomiki X/Z: 260/795 mm Skupna priključna moč: 40 kVA Ksdpfxsy Szwho Ah Uedu Teža stroja pribl.: 6,4 t Potrebni prostor pribl.: 3.994 x 3.056 x 2.187 m

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Premer obdelovanca: 410 mm Dolžina obdelovanca: 500 mm Nadzorna enota: Fanuc 21i TB Standardni premer obdelovanca: 275 mm Hod osi x: 277 mm Hod osi y: 82 (±41) mm Hod osi z: 500 mm Kdsdezd Un Ispfx Ah Uou Hitrost vretena 1: 4500 vrt/min Moč vretena 1: 18,5/18,5/15 kW Maksimalni premer palice v vretenu 1: 65 mm Število pozicij v vrtalni glavi / število pogonjenih pozicij: 12/12 Moč pogonjenega orodja: 5,5 kW Hitrost pogonjenega orodja: 6000 vrt/min Skupna potrebna moč: 39,2 kVA Masa stroja (približno): 6,2 t Zasedena površina (približno): 3,1 x 2,0 x 2,2 m Vpenjalna glava: Hainbuch Dodatna oprema: Stroj za odvajanje opilkov Vmesnik za robota Visokozmogljivo natančno stružni center z osjo Y in robotskim sistemom za nalaganje za obdelavo gred. Visokonatančen robot Stäubli za nalaganje gred je na voljo kot dodatna oprema. Odlično primeren za obdelavo kompleksnih strojenih delov s stranskim freziranjem. Stroj je bil uporabljen z oljem, ne z emulzijo. Nameščen je sistem za gašenje požara.

Stanje: rabljeno, Leto izdelave: 2014, Suitable for oil mist extraction. Ksdpfownprxox Ah Uodu Rated airflow: 950 m³/h Noise level: 71 dB(A) Speed: 2850 rpm Dimensions (W x D x H approx.): 525 x 592 x 781 mm Weight approx.: 55 kg Connection rating approx.: 0.75 kW (400 V / 50 Hz) Colour: Grey

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Kdodpfx Aevv Spkeh Usu with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 2021, skupna višina: 2.810 mm, skupna dolžina: 4.000 mm, skupna širina: 2.250 mm, skupna masa: 8.700 kg, CMZ TD-30-TM-800 CNC obdelovalni center za struženje in frezanjenje Tehnični podatki Ksdpez Exmnofx Ah Ujdu Proizvajalec: CMZ Tip: TD-30-TM-800 Letnik izdelave: 2021 Krmilnik: FANUC 32i-TB Plus Maksimalna dolžina obdelovanca: 800 mm Maksimalni premer obdelovanca: 550 mm Moč vretena: 42 kW Premer palice: 82 mm Revija za orodja: 16 položajev Masa stroja: 8.700 kg Oprema: Pogonska orodja, os C, transporter za odrezke Hod osi Y: 140 mm Masa (približno): 8.700 kg Dimenzije (D x Š x V, približno): 4000 x 2250 x 2810 mm Hod osi Z: 800 mm Hod osi X: 380 mm Krmilnik: FANUC 32i-TB Plus Hitrost vretena: 3500 vrt/min Letnik izdelave: 2021 Plačilni pogoji: 100-odstotno plačilo pred prevzemom Pogoji dostave: Brezplačno natovarjanje na tovornjak Pod napetostjo: Ne