CNC avtomatska stružnica

Nakamura-Tome AS-200

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 Kljdpfx Adjvzt Hbjkop MAIN SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11/15 [kW] - Torque: 51/110 [Nm] - Spindle speed: 4500 [rpm] - Max. bar diameter: 66 [mm] - Max. machining diameter: 340 [mm] - Max. diameter over bed: 400 [mm] - Max. main spindle chuck diameter: 190 [mm] - Minimum C-axis resolution: 0.001 [degrees] TURRET - Number of positions: 12 - Number of driven positions: 12 - X/Z traverse path: 227.5 [mm] - Y traverse path: +/- 41 [mm] - Driven tools speed: 6000 [rpm] - Driven tools power: 3.7/5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 21 [kW] WEIGHT AND DIMENSIONS - Footprint: 2000 x 1600 [mm] - Machine height: 1850 [mm] - Machine weight: 4300 [kg] EQUIPMENT - Control system: Fanuc - Interface: Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chip conveyor - Oil mist extraction: DONALDSON - Tool probe - Parts removal device - Parts conveyor belt - Fire extinguishing system*: SIEMENS * Note: Functional capability not guaranteed. To be checked by a qualified company commissioned by the buyer. - Number of driven tool holders: 2 - Number of fixed tool holders: 4 - Collet chuck: EROWA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, This is a side-weld wicket bag making machine, model Lemo Intermat 850 STN-CP Knoter. Production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products, and other types of wicket bags. Number of lanes: single lane / lane wicket. Processable materials: LDPE, HDPE, PP, and recycled extracts. Seal width (bag length): 120-450 mm, draw length (bag width): 200-850 mm, gripper arm length: 600 mm, max. linear speed: 65 m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250. Drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, inlet nip rollers, sealing bar. Attachments and accessories: bottom gusset (bottom gusset only included), handle unit, longitudinal sealer, pre-sealer, angled sealer, cross sealer, handle punching, photoelectric sensor for printed film, automatic single-step conveyor (index conveyor), handle hole punch, G-fold unit, V-fold station, web guide 1800 mm, antistatic bars, automatic labeling system. The machine is in good condition. Kledow U T T Eopfx Adkop

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 18.417 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 203 mm, pomik osi Y: 82 mm, pomik po osi Z: 585 mm, moč vretenovega motorja: 15.000 W, skupna višina: 1.852 mm, skupna širina: 1.935 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TF, največja dolžina izdelka: 2.716 mm, število osi: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine is equipped with a 12-station turret and a main spindle speed of up to 4,500 rpm. If you are looking for a high-quality lathe, consider the NAKAMURA-TOME AS-200L horizontal turning machine we are offering for sale. Please contact us for further details. Standard equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Collision protection system (mechanical “airbag”) • Y-axis • 15" LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system Kodpfoytqpnjx Adkelp • Work area lighting • Coolant pump – 180 W • Initial fill with coolant (Blaser coolant) Including Options • Transformer • Luck-Beil II (NT Manual Guide – graphical user interface for control) • Enlarged spindle bore to 71 mm (4,500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Parts ejector cylinder from counter spindle (100 mm stroke) • Machine status signal tower (3 colors) • Operator shelf underneath control panel • Parts catcher Type A (Ø71 mm / L150 mm / 3 kg) • Prepared for LNS bar feeder • Air blow through main and counter spindle • Manual tool setter (Renishaw, one arm for both spindles) • Spindle cooling system for main and counter spindle • Prepared for oil mist extraction system Technical Specification Counter Spindle Yes Driven Tools Yes

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions Kjdpfx Aoh Rdwxjdkolp - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Kloded Ev Upopfx Adkop Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Spinner TS66L-SMC CNC stružnica s kontravretenom Leto izdelave: 2008 Krmiljenje: FANUC 18i-TB Premer struženja: 400 mm Dolžina struženja: 640 mm Premer palice: 66 mm Obodni premer: 685 mm Pomik - X os: 240 mm Pomik - Z os: 640 mm Hitrost vrtenja glavnega vretena: 4000 1/min Hitrost vrtenja kontravretena: 5000 1/min Kledpfx Aexptz Redkop Prehod glavnega vretena: 73 mm Prehod kontravretena: 43 mm C-os: 0,001 ° Revolverska glava: 12 pozicij, vse gnane Orodni nosilec: VDI 30 Pogonsko orodje: 9 kW Pogonsko orodje: 4000 1/min Premer posuv: 500 mm/min (brezstopenjsko) Hitri pomik X-os: 18 m/min Hitri pomik Z-os: 24 m/min Pogonska moč motorja vretena: 19 / 14 kW Teža stroja: pribl. 5,7 t Potreben prostor: pribl. 2,35 x 1,65 x 1,85 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, X/Y/Z: 360/120/750 mm Preboj drog 82 mm Diskasti revolver z 12 pogonskimi postajami za orodje C-os Y-os VDI 40 NC konjiček MK 5 z nožnim stikalom Nožno stikalo za vpenjanje na glavnem vretenu Zračni zastor Signalna luč Naprava za hlajenje Klsdpjw Nxyasfx Adkjp Transporter za ostružke Hidravlična zavorna zadrževalka ShopTurn Funkcija Transmit (valjasti utori na plašču in čelnih površinah) iXpanel (razširitev upravljanja in organizacije krmiljenja) Posodica za prijemalo Majhen paket orodja

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics Kedpewg R I Eofx Adkslp These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.545 mm, premer struženja nad prečnim suportom: 660 mm, izvrtina vretena: 65 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.545 mm, Manufacturer: MAZAK Model: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year of manufacture: 2007 Multitasking machining in a single setup Sub spindle with full C-axis capability for part transfer The INTEGREX IV Series is capable of performing all machining processes entirely High-speed milling spindle with swiveling function up to 240° Ksdpfxex S Hm Ij Adkolp Lower turret with live tooling spindle Chip conveyor with coolant system and 15-bar through-spindle coolant (IKZ) Double power chuck KNCS-N 210-53 (SMW Autoblok) MAZAK Flex-GL150F Gantry Loader Gripping area: 200 × 120 mm (length) / 15 kg Max. turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1545 mm B-axis: 270° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 22 kW Sub spindle speed: 5,000 rpm Sub spindle bar capacity: 65 mm Sub spindle power: 18.5 kW Tool changer: 40 positions B-axis tool mount: Capto C6 B-axis spindle speed: 12,000 rpm Length: 5,200 mm Width: 2,550 mm Height: 2,600 mm Weight: 14,000 kg

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm Ksdpfet Apugjx Adkjlp See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).