CNC stružnica NAKAMURA TOME

Nakamura Tome SUPER NTJ

Stanje: rabljeno, Leto izdelave: 2003, Drehdurchmesser 190 mm Drehlänge 620 mm Steuerung Fanuc Series 18i-TB Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 13,5 t Raumbedarf ca. 5350X3350x2395 m CNC Dreh- und Fräszentrum NAKAMURA TOME Super NTJ Baujahr 2003 Steuerung Fanuc Series 18i-TB - Hauptspindel muss überholt werden. - Oberer Revolver ist mit einer G42 Turbo- Luftangetriebenen Spindel 60000 U/min und Steuergerät GTR 3 nachgerüstet. Anzahl der Achsen: 9 Anzahl der Revolver: 2 Max. Drehdurchmesser: 190 mm Max. Drehlänge: 620 mm Stangendurchlass: bis zu 65 mm Umlaufdurchmesser über Bett: 190 mm Anzahl: 2 (Haupt- und Gegenspindel) Spindelnase: A2-6 Antriebsleistung: 15 kW Max. Drehzahl: 60000 U/min X-Achse: 345 mm Y-Achse: +/- 45 mm Z-Achse: 1240 mm Nwsdpsxiy Auefx Ag Tsc B-Achse: +/- 91° oben voll Servogesteuert 0,001° Stangendurchlass: D 65 mm - 12-fach Revolver für angetriebene Werkzeuge - 24-fach Revolver für Drehwerkzeuge (Doppelhaltertechnik) - mit viel Zubehören - 2 x HB-Futter Hainbuch

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Nsdpfsu Aa I Sex Ag Tjwc Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 2003, NAKAMURA TOME SUPER NTJ CNC-STROJNO STRUŽENJE FABRIKAT: NAKAMURA TOME, JAPAN MODEL: SUPER NTJ GODINA PROIZVODNJE: 2003 Nedpfx Ajv I Tx Rsg Towc UPRAVLJANJE: FANUC 18 iT B PREČNIK STEGE: 210,0 mm MAKS. PREČNIK OBRTA: 200,0 mm RASTOJANJE IZMEĐU CENTARA: 780,0 mm PREČNIK POVLAČNE CEVI: 80,0 mm HODOVI: X OSA: 750,0 mm Z OSA: 130,0 mm REVOLVERSKA GLAVA: 2 x 12 POZICIJA BRZINA VRETENA: do 5.000 o/min PROLAZ VRETENA: 65,00 mm PRIRUBNICA VRETENA: A2-6 DODATNO: - CNC KRATKI MAGACINSKI ULAŽIVAČ ŠIPKI - REVOLVERSKI ALAT - TRANSPORTER STRUGOTINE - PRIRUČNICI

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 16.212 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B151104, stružna dolžina: 620 mm, premer struženja: 190 mm, potovalna razdalja osi X: 345 mm, pomik osi Y: 45 mm, pomik po osi Z: 1.240 mm, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Chuck size: 165 mm Swing over cross slide: 190 mm Nsdsw Hyi Sjpfx Ag Tewc Axes Travel X1/X2 axes: 345 mm / 167.5 mm Travel Z1/Z2 axes: 1,240 mm / 685 mm Y-axis travel: ±45 mm B-axis travel: ±91° Rapid traverse X1/X2 axes: 16 m/min Rapid traverse Z1/Z2 axes: 40 m/min Servo-controlled: 0.001° Hirth coupling: 1° Spindles Spindle speeds: 5,000 rpm for 51 mm (L/R) Spindle speeds: 4,500 rpm for 65 mm (left only) Bar capacity left spindle: 65 mm Bar capacity right spindle: 51 mm Drive power left: 18.5 kW Drive power right: 15.711 kW Turrets Turret for driven tools: 12 positions Turret for turning tools: 24 positions Tool size (square/round): 25 mm / 32 mm Control: Fanuc 18 iTB MACHINE DETAILS Net weight: 12,500 kg Automatic mode hours: 16,212 h Feed hours: 8,392 h "Control ON" hours: 27,816 h EQUIPMENT Helical interpolation Air blast left IRCO interface Collision monitoring NT Nurse NC kit Spindle speed correction switch for both spindles Work area light Automatic centralized lubrication for all axes Mobile coolant tank Door interlock Transformer CE marking Chip conveyor Coolant and air blast through right spindle 5 free pairs of M-functions Finished parts gripper G Parts catcher tray A for residual material Polygon turning function Intelligent handwheel GR 65 Modular A6 collet chuck 3-jaw chuck right

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, GEBRAUCHT Soraluce Soramill Modell SP 10000 Fahrständer, Tisch-Bauweise CNC-Fräszentrum mit automatisch ölnebelschmiertem orthogonalem Fräskopf mit 1 x 1 Grad Indexierung und HEIDENHAIN TNC 430 M Steuerung. Baujahr 2002, SN 8647 Tischfläche - 10.000 x 1.100 mm Verfahrweg Säule (X) - 8.500 mm Vertikalverfahrweg (Y) - 1.600 mm Schieberverfahrweg (Z) - 1.200 mm Spindelmotor - 28 kW Spindelaufnahme - Standard ISO 50 BT50 Werkzeugaufnahme Zugbolzen - DIN 6987-2 Form A, ISO 7388/2 Form A Unabhängiges Getriebe mit 2 Bereichen Drehzahlbereich - 20 bis 4.000 U/min Vorschubbereich - 5 bis 5.000 mm/min Eilgangantrieb (X, Y, Z) 15.000 mm/min Vorgespannte Doppelmutter und Kugelumlaufspindeln auf allen Achsen. Linearführungssystem mit umlaufenden Zylinderrollen und Stahlführungen in X-, Y- und Z-Achse. Unabhängiger AC-Servoantrieb für jede Achse. Linearmaßstäbe in X-, Y- und Z-Achse mit Luftspülsystem. Automatische Werkzeugspannung. Automatische hydraulische Werkzeugauslösung. CNC-Steuerung HEIDENHAIN TNC-430-M (Flacher TFT-Bildschirm mit digitalen Antrieben), 9 Achsen CNC und 1 Spindel, davon 5 simultan interpoliert. Arbeitsraumbeleuchtung Kühlung des Schaltschrankes Beleuchtung des Schaltschrankes Nwjdsr Hr Aropfx Ag Tjc Heidenhain HR410 tragbares elektronisches Handrad mit 3m Spiralkabel Horizontales Schwenkbedienpult für CNC-Steuerung Orthogonalkopf 28KW, 800Nm, 1° x 1°, 4000 U/min. ölgeschmiert – inkl. Ölkühleinheit für Kopf und Getriebe. Option G2, Schieber für 4000 U/min vorbereitet, enthalten. Kühlmittelzufuhr durch die Spindel, Typ AD. Kühlmittelanlage mit 500l Tank und zwei Pumpen für Niederdruck (3 bar) und Hochdruck (8 bar), Förderleistung 50 l/min. Die Anlage enthält eine kombinierte Papier- und Magnetbandfiltersystem. Feste Bedienerplattform an der Säule Werkzeugmagazin mit 40 Plätzen, BT50 Max. Werkzeuglänge: 400 mm. Max. Werkzeugdurchmesser: – bei vollem Magazin 120 mm, bei leerer Nachbarposition 250 mm. Max. Werkzeuggewicht: 20 kg. Mittleres Werkzeuggewicht bei vollem Magazin: 10 kg. Max. zulässiges Gesamtgewicht: 20 kg. Späneförderer Scharnierbandförderer Maschinenvorbereitung für den Einbau eines 4. Achse elektromechanischen Rundtisches. Späneschutz an Tischfront und beiden Seiten: vier Schiebetüren, Höhe ab Boden 2.100 mm, Länge je 1.700 mm, manuell bedienbar mit mechanischer Verriegelung. Türen lassen sich für die gesamte Längsverfahrweg öffnen. Rückseite des Tisches offen. Schutz an Rück- und beiden Seiten der Maschinensäule.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 18.179 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B151707, stružna dolžina: 620 mm, premer struženja: 190 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 345 mm, razdalja med vreteni: 970 mm, TECHNICAL SPECIFICATIONS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Maximum swing diameter over bed: 190 mm Swing diameter over cross-slide: 190 mm Standard turning diameter: 170 mm Maximum distance between spindles: 970 mm Axis travels X-axis 1: 345 mm X-axis 2: 167.5 mm Y-axis: +/- 45 mm Z-axis 1: 1,240 mm Z-axis 2: 685 mm B-axis: +/- 91° C-axis 1+2: 360° Main spindle Maximum spindle speed: 4,500 rpm Main spindle power rating: 18.5 / 15 kW Spindle bearing diameter: 110 mm Spindle bore: 80 mm Maximum bar capacity: 65 mm Spindle nose: A2-6 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle Maximum spindle speed: 5,000 rpm Sub spindle power rating: 11 / 7.5 kW Spindle bearing diameter: 90 mm Spindle bore: 63 mm Maximum bar capacity: 51 mm Spindle nose: A2-5 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle travel: 760 mm Upper turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Boring bar diameter: 32 mm Indexing time: 0.2 – 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm B-axis: 182° Y-axis: 90 mm Lower turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Boring bar diameter: 32 mm Indexing time: 0.2 – 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm Turret live tooling drive Spindle speed at driven stations: 6,000 rpm Power rating – driven tool stations: 5.5 / 3.7 kW Number of driven tool stations: 24 Maximum shank diameter – pins: 25 mm / 32 mm Feeds Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min Rapid traverse B-axis: 180°/s Rapid traverse C-axis: 600 rpm Feed rate X: max. 16,000 mm/min Feed rate Y: max. 6,000 mm/min Feed rate Z: max. 40,000 mm/min Tip feed: 0 – 1,260 mm/min Feed rate C: 1 – 4,800°/min MACHINE DETAILS Control: Fanuc 18 iTB Weight: 12,500 kg Electrical Data Frequency: 50 Hz Voltage: AC 200/220 V Maximum load: 198/180 A Main circuit breaker: 225 A Transformer rating: 68.6 kVA Njdpfx Ajxgpclsg Tswc Control voltage: DC 24 V Total power requirement: 77 kVA Operating hours Spindle hours: 18,179 h Operating hours: 53,242 h Power-on hours: 99,999 h

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Nwodpsg Ip Efjfx Ag Tsc Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Stanje: dober (rabljeno), Leto izdelave: 1972, LZ-strojni stružnica Izdelovalec: HEIDENREICH & HERBECK Tip: 21RO l. 1972 s hitromenjalnim držalom Parat (10 kosov), dokumentacija za stroj, natančni kazalnik navojev, koničast hrot, 250 mm Forkardt vpenjalno glavo. Premer struženja nad posteljo: 430 mm Premer struženja na suportu: 255 mm Dolžina med konicama: 1000 mm Dolžina struženja: 750 mm Hitrosti vretena: 19–2000 min⁻¹, motor 5,5 kW Nsdpfxjt Ipi Ij Ag Tewc Premer luknje vretena: 56 mm Ostali podatki v tehničnem listu Potrebni prostor: dolžina 2900 mm, širina 1100 mm, višina 1300 mm, teža cca 1750 kg. Strojna dokumentacija priložena. Vgrajena hladilna naprava, zadnja stena za odvajanje odrezkov. Stroj je v dobrem stanju, možen preizkus pod tokom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, LZ stružnica proizvajalca VDF HEIDENREICH&HARBECK, tip: 540 Hamburg, letnik 1986. V zelo dobrem originalnem stanju, z digitalnim prikazovalnikom položaja Heidenhain POSITIP 880 na 3 oseh. Podajalni in hitri pomik na vseh treh oseh, tudi na zgornjem suportu. Nsdpex Hr Duofx Ag Tjwc Opremljena s hladilno napravo, zadnjo zaščito proti ostružkom in dokumentacijo stroja. Vpenjalna glava Forkardt 315 mm Stružni premer: 540 mm Stružna dolžina: 1500 mm Vretenska odprtina: 103 mm Število vrtljajev vretena: 9-1800 obr/min Nosilec orodja Multifix C Fiksna luneta Zaščitni pokrov za ostružke Dodatni podatki v tehničnem podatkovnem listu. Potrebna površina: dolžina 3,8 m, širina 2 m z zadnjo steno, višina 2 m z zadnjo steno, teža pribl. 3500 kg.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. Nwjdpfx Aswbh Ifsg Tjc ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.