Stroj za superfiniširanje

Nagel SE01-50-SO

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, Dwodpfeizwv Njx Af Ssa 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary tilting table is possible.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Dwedpsuz If Nofx Af Soa Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Leto izdelave: 2023, stanje: novo, številka stroja/vozila: PRJ065955, ALZMETALL Bench Drill Machine, Drilling capacity in steel: 12mm. Chuck mount: B16 external taper, spindle stroke: 40mm, throat depth: 200mm, column diameter: 50mm, usable table surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle–baseplate distance min./max.: 110/250mm, manual feed, machine height without options: 670mm, net weight: 64kg. - Infinitely variable speed range: 250–5000 rpm Standard features: 5" TFT LCD display with touch function: Manual entry of desired spindle speed, actual speed display, integrated drilling depth display with touch zeroing, virtual drilling depth scale on the display, machine status and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m. Three separate buttons for clockwise, counterclockwise, and stop. Spindle locking via braking function, spindle guard with electric safety interlock, lockable main switch, emergency stop mushroom push-button (latching), stepless speed adjustment via potentiometer, IP54 protection rating, spindle guard with electric safety interlock. Coating: DD textured lacquer, signal white RAL 9003, PANTONE 7545c, black. Includes the following options: Dwjdpfx Afelub Rde Sea LED machine light, pos. 12. Delivery time: ex stock Waiblingen Beinstein

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je vertikalni visokozmogljiv rezkalni in navojni obdelovalni center DMG Mori. Pomik X/Y/Z: 700mm/420mm/380mm, največje dimenzije obdelovanca X/Y: 880mm/550mm, dimenzije mize X/Y: 840mm/420mm, največja obremenitev mize: 400kg, hitrost vretena: 10000 vrt/min, moč vretena: 25kW, navor: 45Nm, število orodij: 15, vpenjalno mesto orodja: BT30, hitro pomikanje: 60m/min, podajalna sila: 5kN. Dimenzije stroja X/Y/Z: pribl. 1650mm/2350mm/2500mm, masa: pribl. 4000kg, krmiljenje: Siemens Sinumerik 840D Solutionline, delovne ure stroja: 28892h, ure vretena: 12674h. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Dedeynlu Ujpfx Af Sjwa

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), število osi: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated digital XY and angular readouts for precise measurements. The device is equipped with a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision engineering. Contact us for further information on this machine. • Laterally correct image (no mirror inversion) for easy evaluation • 3-position objective turret for rapid magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary table Type 2 • Maximum workpiece height: 100 mm • Integrated XY and angular digital display for precise readings • Illumination: combination of contour (transmitted light) and vertical (incident light) Dwjdpfox D I Etsx Af Ssa • Light source: 24 V / 150 W halogen for high-quality projection • 4-position condenser in transmitted light mode with automatic illumination adjustment for magnification • Optics: semi-transparent mirror for clear incident light images; telecentric lenses for distortion-free imaging across the entire field • Focusing via movable optical head (table remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; tilt/surface illumination ±0.15% • Robust construction with precision-engineered guides; workshop-suitable and easy to operate • Proven Nikon quality, made in Japan • Large projection area, suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision engineering, and sample inspection • Flexible upgradability with digital interfaces or SPC connectivity

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Dwsdpfx Aevdk N Esf Soa Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: dober (rabljeno), Leto izdelave: 2005, Machine type: Cylindrical grinding machine Manufacturer: Junker Model: Jumat 5340/s Serial number: 2328 Year of manufacture: 2005 Dwodpfxskyrqio Af Ssa Available immediately Located at site for self-dismantling Dismantling and loading can be offered as an option

Stanje: rabljeno, Leto izdelave: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/lead Dwsdot Hwzcspfx Af Sea Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Workpiece Loading Device Type MZ 600, Year of manufacture approx. 1991, #3591 Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Starts: 1 Minimum/maximum centre distance tool–workpiece: 0 - 70 mm Whirling head swiveling: +/-12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/lead Whirling head drive: approx. 1.5 kW Total drive approx.: 4.5 kW – 220 V/380 V / 50 Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Machine designed for the production of medical screws. Equipped with an automatic workpiece feeder via a Rübenach vibratory bowl with pneumatic swing gripper for insertion of blanks, as well as with counter-center (inserter) and ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and a cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, and the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display of motion sequence. Fault indicator, workpiece counter, oil mist extraction, coolant system, etc.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 500 kg, skupna višina: 2.398 mm, skupna širina: 1.690 mm, skupna dolžina: 1.900 mm, poteza s peresom: 300 mm, dolžina obdelovanca (maks.): 790 mm, širina obdelovanca (maks.): 530 mm, višina obdelovanca (maks.): 275 mm, skupna masa: 2.800 kg, kapaciteta rezervoarja: 410 l, GF Machining Solutions FORM 200 Year of manufacture: 2015 – Only 7,200 eroding hours! Die-sinking EDM machine in C-frame design Fixed table with lowering tank Travel axes (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable tank height: 100–325 mm Including pneumatic chuck, Erowa ITS 50 / 3R Systems / Hirschmann (as per choice) Maximum electrode weight: 50 kg Maximum inertia: 2000 kgcm² 4-position automatic electrode changer AC FORM HMI control interface Operation via 15" LCD color touchscreen display Keyboard and manual control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg The machine will be cleaned and serviced by us upon receiving your order. An erosion test will then be carried out. We are happy to commission the machine at your site and provide operator training. Optional: - Transport - Chiller unit - Dielectric fluid Dwjdpswi Iuujfx Af Sea - Clamping devices

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Well-maintained Sunnen honing machine with Felsomat loading system. Internal diameter range¹: Krossgrinding® tools: 5.46 to 32 mm when equipped with CGT tools TurboHone® tools: 3.81 to 32 mm when equipped with MMT tools Connecting rod tools: 53.8 to 63.8 mm when equipped with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque at low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 strokes/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar recommended Temperature range: 0° to 35° C Installation requirements (concrete floor) At least 150 mm thick Machine dimensions: L 2,946 mm x W 2,971 x H 1,829 mm Colour: Pearl grey with tin grey and burgundy decorative stripes Net weight: 1,579 kg Sound emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic setup: Spindle speed, stroke speed, stroke length, infeed value and sparkout Automatic finishing: Standard Machine operating modes Automatic: Dodpfjud Nm Rjx Af Sswa Manual: Series production Single-part production Clamping optional