Sezona trak

MWT Lettershopsysteme GmbH Octopack 1500

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz Fedpfx Ash Eibashmsgc

Leto izdelave: 2000, stanje: generalkompletno obnovljen (rabljeno), System for filling, cooling, and sealing suppository casting packs made of plastic. The line was completely overhauled mechanically and electronically in 2019 and is as good as new. Before delivery, the system will be tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet. Fgsdpfx Ahjfc I Haemoc

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: Fsdpfx Ahjwwtylsmjgc 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Fgjdpfedmi Niox Ahmoc Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. Fodpoh Ek Dajfx Ahmsgc For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: dober (rabljeno), Rotary vane vacuum pump /// Oil circulation lubricated Manufacturer: Busch Model: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: Fully overhauled If you have any questions regarding this listing or general inquiries about vacuum generation, we are happy to assist you. Fgodpfx Aobrantshmoc

Stanje: rabljeno, Technical details: Lifting capacity in kg: 6,600 kg Fork length: 1,500 mm Lift height: max. 3,700 mm Track width (front): 1,800 mm Track width (rear): 1,400 mm Fedpfeu Nwl Usx Ahmsgc Wheelbase: 2,200 mm Voltage: 15 V / Hz Operating hours: 416.0 (as of 28/07/2025), still in operation Approx. weight: 9,500 kg Dimensions (L x W x H): 5.2 x 2.0 x 2.8 m - Mast: duplex design - Fork carriage width max. 1,800 mm - Load center: at 600 mm = 6,600 kg; at 700 mm = 6,105 kg; at 800 mm = 5,685 kg - Equipped with coupling (bolt Ø 40 mm)

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 1205, Perfect binder line Kolbus KM 412.B Year of manufacture: 2011 Comprising: Book block feeder Meccanotecnica XMT Year of manufacture: 2011 - Feed belt from the right Gathering machine Kolbus ZU 841.B Year of manufacture: 2011 Description: - Manual feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical signature detection: SignalLynx Fgedpfx Ahot Rmhaomsc Card gluer Kolbus KK 841 - Hotmelt gluing: Nordson Problue - Air Center: VariAir central system - Delivery for incomplete products: AS 841 - Positioning unit - Intermediate vibrating unit - Transfer unit to binder Perfect binder Kolbus KM 412.B Year of manufacture: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine processing station - 2nd spine processing station - 3rd spine processing station - Brushing station - Exclusive dust extraction, machine was connected to central dust extraction system - Drive station for 1st spine gluing unit - Cold glue spine unit, interchangeable - Intermediate drying station (infrared) - Drive station for 2nd spine gluing unit - Hotmelt spine unit, interchangeable - Premelter for spine unit: LH 375.C - 1st PUR spine unit, interchangeable - Premelter for PUR spine unit: Nordson XNO 962 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Premelter for side gluing unit: LH 375.A - Gauze station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Creasing station: 6 - 1st pressing station - 2nd pressing station - Laying device (to the left) Conveyor section Kolbus TSE Description: - Transport system, length (approx.) - Emergency delivery Drying tower Three-knife trimmer Kolbus HD 153.P Year of manufacture: 2011 Product counter: 148 million Description: - Co-Pilot with touchscreen - Infeed from the right - Counting stacker - Knife presetting device - Total number of knife sets: 2 - Interchangeable cutting cassettes (standard set): 7-18 - Silicone spray unit Book stacker Kolbus (RIMA) XRS 130 Year of manufacture: 2011 Description: - Compensating book stacker - Delivery to left and right

Stanje: novo, Leto izdelave: 2026, trajanje garancije: 12 meseci, skupna širina: 2.300 mm, skupna dolžina: 1.300 mm, skupna višina: 2.450 mm, vrsta vhodnega toka: trifazni, Powder booth, painting wall, extraction unit TQN2020 Working dimensions (mm): 2000 (W) x 2000 (H) x 400 (D) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) SPECIFICATION: • Fan output 2.2 kW • Capacity 10,500 m³/h • 3 x 100% polyester filters • Filtration efficiency of 99.9% • Control panel IP 66 • Automatic filter cleaning • Hermetically sealed lighting IP 65 • Powder reservoir Cabin available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines compared to products available on the market. Professional advice and service. Warranty. In-warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. brand products are EC-certified. We provide our own transport – prices are set individually for each offer. We issue invoices with VAT stated separately. Short delivery times! Fjdjd S N Szopfx Ahmsgc Option to order machines in various, custom configurations and dimensions! Please contact us.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), The system includes: (1) KUKA KR 150-2 2000 industrial robot, (2) SPATZ spot welding system, (3) OMRON camera inspection, (4) SICK light barrier. Operating hours: 2,602 h. Fedpfxogqkpmo Ahmogc