Stroj za luknjanje

Muhr und Bender / Mubea KLH 500 / 610

Stanje: novo, Fastech 3-Roller Round Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1050 mm Sheet thickness: max. 3.3 mm Sheet thickness (pre-bending): 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Minimum bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: - Upper and lower rollers electrically driven - Swing-out upper roller - Device for conical bending - Asymmetric roller arrangement - Self-braking main motor - Separate control and operator panel - Safety rope Values apply for St-37 / 240 N/mm² Fpsdehzq Dbopfx Aa Rsp CE marking

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Euromac hidravlični udarno-rezalni stroj Tip CX1000/30/2000 Nosilnost 30 ton Domet osi Y: 1000 mm Domet osi X: 2000 mm Domet osi X s ponovno pozicioniranjem: do 10000 mm Nadzorni sistem Euromac Eurowin Večnamensko orodje s 6 priključki + s 6-mestnim držalom za matrice Različno orodje je priloženo. Fpjdpfx Aaspmt Tts Rop

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: ročni, delovna širina: 1.020 mm, nastavitev pregibne grede: 46 mm, Kot upogiba (maks.): 135 °, skupna masa: 340 kg, skupna dolžina: 1.350 mm, skupna širina: 850 mm, skupna višina: 1.175 mm, Oprema: dokumentacija / priročnik, Upper and lower blades in removable segments Including manual rear gauge PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 340 KG Width ----- 1350 mm Fpjdpfxjga T A Do Aa Rop Depth ----- 850 mm Height ----- 1175 mm

Stanje: novo, Leto izdelave: 2025, Longitudinal and Transverse Seam Welding Machine (50Hz) --- Rated power at 50% duty cycle: 80 kVA Short-circuit current: approx. 35.9 kA Electrode force: 100–600 daN / double stroke Throat depth: 550 mm Roller electrode Ø longitudinal: 160/125 mm Roller electrode Ø transverse: 160/160 mm Feed rate: 0.63–5.7 m/min (electronic) --- Welding controller: Filius Classic, 128 programs Siemens S7-1200F PLC machine control Prepared for spot and projection welding. --- Including extra options: - 2-channel safety valves - Double foot switch - Adjustment device - Lower arm support - Depressurised lowering of upper assembly - Electronic flow monitor - Electronic electrode force switch - Main switch --- 6 months warranty --- Training and commissioning on request --- Spot welding electrodes & spare parts available from stock --- Fpsdpfx Aewqmrzoa Rjp For further information, please visit our homepage

Stanje: novo, Very robust motorized 3-roll plate bending machine Weight: 670 kg Equipped with hardened rolls Roll hardness: HRC 28-32 Fpodpega Tz Ajfx Aa Rjp Minimum sheet thickness: 0.5 mm Maximum sheet thickness: 3 mm Maximum working width: 1,000 mm Pre-bending: 2.5 mm Roll diameter: 95 mm Motor power: 1.5 kW INCLUDES * Hardened rolls * SCHNEIDER electrical components

Stanje: rabljeno, Leto izdelave: 1986, Širina pločevine 2040 mm Debelina pločevine 4,0 mm Razmik med stojali 2100 mm Premer valjev 150 mm Skupna potrebna moč 7,0 kW Teža stroja cca 2,2 t Potrebni prostor cca 2,95 x 1,0 x 1,75 mm Stroj za ukrivljanje pločevine s 3 valji - 2 pogonska valja Fpedpfxsy Ezzye Aa Rsp - zadnji valj električno nastavljiv - konično ukrivljanje - nožno stikalo - naprava za izklop v sili

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 110 t, Geka punching machine, model Puma 110/E-500; punching force: 110 tons, hole capacity: diameter 40 mm x 20 mm; throat depth: 500 mm. The machine is in good condition and comes fully equipped. Fodpfx Aaevdkprs Repp

Stanje: dober (rabljeno), številka stroja/vozila: 550C08, A used PEDDINGHAUS punching machine with large throat depth and spacious support table equipped with stops. Punching capacity: 45 tons Stroke rate: 40 strokes/min Throat depth: 762 mm Fedod Hxrtepfx Aa Rjpp Working height: 1,110 mm

Stanje: rabljeno, Leto izdelave: 1986, max. Y-axis travel: 0–762 mm; max. X-axis travel: 0–2000 mm; max. punching force: 250 kN (25 t); max. sheet thickness: 10 mm; max. punching diameter: 105 mm; max. stroke length: 0–25 mm; usable throat depth: 750 mm; support table (LxW): 4200x900 mm; total weight: 4,100 kg; total electrical connection load: 5.9 kW; Fpedpfx Aajbn U Tls Rep overall dimensions: L=4200 W=1695 H=1660 mm; various accessories;

Stanje: dober (rabljeno), Leto izdelave: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Model: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 t - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - Equipped with support table Fpjdpfswxy Dgex Aa Rjp