Transportni trakovi

MTF Technik MTF Förderband GL2100 x 420, 2008

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Ibodpeyh I Emefx Amusb Razdalja med stebri V: 1420 mm Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: zelo dobro (rabljeno), Double pump for Krauss Maffei machines Iodeg I Uycopfx Amuobb Voith Rexroth 3-stage variable displacement pumps Type: SY2DFE1-21/071-071 KM No.: 6441936 MNR: R900751978 Photos are sample illustrations; pumps may vary in color!

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation Iodpfx Ajg Ey Ufemusbb - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, brand KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, ready for immediate use, with low operating hours. Equipped with electronic injection and dosing units as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally) Core pull: 1 hydraulic Needle shut-off: pneumatic Tie bar extension: 160 mm Internal pressure sensor Selector valve Transport and loading can be organised Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Ibsdpfx Amou Hxm Ueuob Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your workshop? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, hydraulic vice Brand: Hilma Jaw width: 200 mm Jaw height: 65 mm Total length: 690 mm Overall height: 205 mm Maximum opening width: 440 mm Drive: horizontal and vertical with hand crank Ibsdpfsdhlqyox Amueb Swivel base: 400 x 370 mm Clamping force: 8 t

Leto izdelave: 2018, stanje: rabljeno, Motan dry air container LBA 400 – H-O-O-Z Year of manufacture: 2018 Price: €3,450 Ijdpfxetphhcj Amusbb Contact person: Mr. Rainer Eckerle

Stanje: dober (rabljeno), Sepro Robot Type: SR 4030 S3 Year: 08-2006 Ibjdpjnxkdnofx Amueb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Kanister z zapiranjem 4 votline na kalup Vroči kanal Ibodpfjxrtmxox Amujb Na voljo dve orodji

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Horizontal injection molding machine from Krauss-Maffei with 120 tons clamping force. All-electric machine. Year of manufacture: 2008. MC5 control system. 63,000 operating hours. 40 mm screw diameter. Extras: anti-vibration plates, 8-zone flowmeter. Additional options: 1x pneumatic valve, 6 hot runner zones, Euromap 67 interface for robot connection. The machine is delivered REFURBISHED by our technical team and in optimum working condition. We can offer commissioning service at your facility. Technical Details INJECTION WEIGHT: 185 g INJECTION VOLUME: 201 ccm OPERATING HOURS: 63,000 YEAR OF MANUFACTURE: 2008 TIE BAR DISTANCE: 470x470 mm PLATEN DIMENSIONS: 780x770 mm CLAMPING FORCE: 1,200 kN INJECTION PRESSURE: 1,860 bar SCREW DIAMETER: 40 mm Ibedsttgybjpfx Amuob MINIMUM MOLD HEIGHT: 200/450 mm OPENING STROKE: 850 mm

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Ijdpjg Ey T Eofx Amuobb Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.