MTE portalni rezkalni stroj FBF-S 7000

MTE FBF-S7000

Stanje: rabljeno, Leto izdelave: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control unit: HEIDENHAIN iTNC 530 HSCI Table size: 7,500 x 3,000 x 300 mm Distance between columns: 3,800 mm Rapid traverse x/y/z: 30,000 mm/min Tool holder: HSK 100 Spindle speed: 6,000 rpm Gear stages: 2 Djdpfxsxb Ed Ue Afqjcr Motor power: 37 kW Operating hours: 28,475 h Spindle hours: 12,629 h Tool changer: 60 positions Internal coolant supply: 36 bar Chip conveyor: dual Milling head: 5-axis milling head OAD Total power requirement: 80 kVA Machine weight: approx. 85 t OAD milling head fully water-cooled. - 6,000 rpm without time limitation. - Patented rotation system by Correa with stationary double-toothing enables rotation every 0.02º. As it does not involve a freely moving toothing, maximum rigidity and precision are ensured. - Allows negative angles up to 45 degrees. - Milling spindle model FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension model AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, hitro pomikanje X-os: 25.000 m/min, hitri pomik os Y: 25.000 m/min, leto zadnje generalne obnove: 2025, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Technical specifications of the machine: Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Travel paths: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range (rpm): 15,000 Feed rates: X, Y & Z axis (mm/min): 10 - 10,000 Maximum rapid traverse speed: X, Y & Z axis (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle, 25 kW - Chip conveyor - Coolant lubrication system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m coiled cable - INA linear roller guide system RUE 45 on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven solution for a profitable entry into our product lines. Dcedpfx Afsv Rw Uujqsr The machines available in this line are procured through a rigorous selection process and subjected to a comprehensive inspection (deep-dive check). After thorough cleaning, any identified obvious defects and faults are professionally repaired by our expert service team.

Stanje: rabljeno, Leto izdelave: 2004, x-hod 3.000 mm y-hod 1.000 mm z-hod 860 mm Krmilnik Heidenhain iTNC-530 Velikost mize 3.600 x 1.050 mm T-utori 7 x 18 mm Razdalja med T-utori 125 mm Razdalja miza-spodnji rob vretena 25–366 mm Obremenitev mize 4.200 kg Dcedpfx Afjwqr Nlsqjr b-os +-105° c-os +-360° Hitri pomiki x/y/z 30.000 mm/min Premer vrtljive mize 1.000 mm Maks. premer vrtenja 1.400 mm Hitrost vretena 9.000 min⁻¹ Vpenjalna glava ISO-50 DIN 69871-AD Motor vretena 28,5 kW Navor na vretenu 240 Nm Menjalnik orodij AITEK, 40 pozicij Najv. teža orodja 20 kg Ročno kolo vklj. Nihajno delovanje vklj. Transporter ostružkov vključen Notranje hlajenje, dovod 20 bar Skupna priključna moč 65 kW Teža stroja cca 24,8 t Prostorske zahteve cca 8.056 x 5.496 x 3.790 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.600 mm, Proizvajalec: ZAYER, Tip: 30 KCU 6000-AR Leto izdelave: 2013 Serijska št.: 77257 5 osi Univerzalna glava -45° Ravna glava Pomiki (X/Y/Z) pribl. 8000/3500/1600 mm Vpenjalo za orodje SK50 8-kratni menjalec orodja Dcedew U E Unspfx Afqsr Krmilna konzola HEIDENHAIN iTNC 530 Transportni trak za ostružke TECNIMETAL Hladilna enota EURO COLD Vpenjalna miza DEMMELER Sistem za hlajenje Varnostna ograja s svetlobno zaveso LENZE

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 5319, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL DATA Travel ranges: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine Bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive a centrally mounted rack. Hardened compact linear guides ensure high precision. Machine Column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems provide dynamic performance and accuracy. Protection is provided by telescopic steel covers. Dedowdub Dspfx Afqocr Spindle Slide and Spindle Head: Made from GGG 60 cast iron, guided by compact linear bearings. Optimal power transmission via long guideways and tight arrangement of the Y and Z axes. Dual Ball Screw Drive: Two vertical ballscrews with separate drives and measuring systems for high dynamics and long-term accuracy. Drive System: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring System: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-Axis Fork Head with Motor Spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor Spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid cooled Electrical Equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine-to-cabinet: 5 m. Control Cabinet Cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy Supply: Compressed air 4–6 bar, G ¼ connection, with filter pressure regulator and condensate separator. Control System: Siemens 840D sl with swiveling operator panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote Maintenance: Fault diagnosis via alarm manager, notification by email/SMS (SIM card and network required). TightBlock Machine Base (X = 8,000 mm): Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X travel range, structurally verified. Coolant System: 500 l tank, filtration system

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement Dedjvy Ihdopfx Afqocr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 8.052 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.875 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.345 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, dolžina podajanja os X: 1.875 mm, dolžina pomika po osi Y: 1.250 mm, dolžina podajanja os Z: 1.345 mm, hitrost pomika os X: 24.000 m/min, hitrost podajanja osi Y: 24.000 m/min, hitrost podajanja os Z: 24.000 m/min, vrtilni moment: 3.430 Nm, teža obdelovanca (maks.): 4.000 kg, skupna višina: 4.950 mm, skupna dolžina: 7.029 mm, skupna širina: 5.200 mm, vrtljajska hitrost (min.): 10 obr/min, največja hitrost vrtenja: 10.000 obr/min, skupna masa: 51.200 kg, hitrost vretena (min.): 1 obr/min, največja hitrost vretena: 500 obr/min, razdalja od središča mize do nosu vretena: 1.600 mm, moč vretenovega motorja: 37.000 W, nos vretena: A2-11, dolžina orodja: 300 mm, vrsta vhodnega toka: Klimatska naprava, premer struženja: 1.450 mm, premer struženja nad prečnim suportom: 1.250 mm, premer vretena: 160 mm, prehod palice: 160 mm, zunanji premer vpenjalne glave: 500 mm, vrtina vpenjalnega tuleca: 160 mm, sila podajanja os X: 20.000 N, pogonska sila Y-os: 20.000 N, podajalna sila osi Z: 25.000 N, dolžina vretena za rezkanje: 300 mm, premer tulec: 160 mm, poteza s peresom: 250 mm, hod vretena: 250 mm, izvrtina vretena: 160 mm, premer nihanja nad prečno desko: 1.450 mm, premer nihanja nad prečnim premičnikom: 1.250 mm, premer nihanja nad zgornjim suportom: 1.100 mm, premer struženja nad ležiščem sani: 1.300 mm, stružna dolžina: 1.600 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, For sale is a Mazak Integrex e-1250 V/8 turning-milling center including comprehensive accessories and a Mazak Palletech High Rise (800B) automation system. The system integrates milling, turning, and automated pallet handling — ideal for complex workpieces in a single setup. _____ Technical Data – Integrex e-1250 V/8 • Travel paths: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 positions (CAPTO) • Control: Mazak SmoothX with 5-axis capabilities • Machining operations: Milling, turning, drilling, tapping, 5-axis simultaneous machining • Coolant system: High-pressure up to 70 bar, Mayfran belt filter system, oil separator, coolant nozzles • Accessories: Tool Eye, Renishaw probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-machining functions • Cylinder & polar interpolation (EIA) • Tool length and radius compensation (5-axis) • Fine spline interpolation (EIA) • Mazatrol turning/milling functionality • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (Mixed Type) • Expandable high-bay solution for flexible production • Ideal for series and mixed production • Note: Pallets to be procured separately _____ Special Features • Complete documentation (digital & paper) • Complete package: machine + automation + accessories _____ Your Benefits Dcjdpfx Aexgu E Eefqjr • “Done in One®” concept: all machining in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: from single parts to series production • Efficiency: automatic pallet change & integrated measuring technology 📍 Location: Southern Germany 👉 Price and delivery conditions on request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, EDEL CP4020 5-osni simultani portalni obdelovalni center 4000x2000 (2008) Proizvajalec: EDEL Tip: CP4020 Leto izdelave: 2008 Stanje: rabljeno, dobro ohranjeno, pod napetostjo in v proizvodnji Dcsdpfxjxixq De Afqjr Krmiljenje: Heidenhain iTNC 530 Delovne ure: pribl. 71.000 h Ure vretena: pribl. 36.000 h Hitrost vretena: 18.000 obr./min Vpenjanje vretena: HSK63 Nagibna glava C-os: +/- 360° A-os: +/- 110° X-hod: 4000 mm Y-hod: 2000 mm Z-hod: 1200 mm IKZ 40 bar Neposreden merilni sistem Pasovni filtrirni sistem Orodjarna za 48 mest Svetlobna zavesa Brezžična merilna tipala

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3261, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 1.300 mm, premer vrtljive mize: 1.600 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Used Milling/Turning Center SHW UniSpeed 5T MC No. 3261 – Year of manufacture 2011 Travel distances: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Construction: Self-supporting machine frame without elaborate foundation required. Precise compact linear guides in all axes. Machine column in portal design, spindle head and carriage made of GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, infinitely variable 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, fully automatic swiveling 360°/180°, 64,800 CNC-controlled positions - SK 50, tool clamping force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick-release tool clamping CNC Rotary Table: - Ø 1,000 mm, run-out 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Swing diameter: max. 1,800 mm Balancing Measuring System: Dcodpfxjw Eb Ito Afqjr Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operated via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed location coding, air purge for spindle protection Control: Siemens 840D, swivel-mounted on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Switch cabinet with integrated cabinet cooler (dual-chamber system, hermetically sealed, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication MQL (Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant switchover - Lubrication: centralized for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-travel 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - 1-channel collision monitoring - Sealing air to glass scales - Wireless 3D touch probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning system ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI hand unit with handwheel, override, emergency stop - Power connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, function units RAL 7016 anthracite grey or RAL 9011 graphite black, silk matt, oil & soda resistant.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 470 mm, pomik po osi Z: 876 mm, moč vretenovega motorja: 30.000 W, največja hitrost vretena: 1.250 obr/min, hitro pomikanje X-os: 24.000 m/min, hitri pomik os Y: 24.000 m/min, premer struženja: 1.000 mm, skupna dolžina: 2.375 mm, skupna višina: 3.659 mm, skupna širina: 4.558 mm, vrsta vhodnega toka: trifazni, vrtilni moment: 3.655 Nm, vhodna napetost: 400 V, skupna masa: 14.000 kg, Oprema: hladilna enota, CNC vertikalni stružnica MAZAK Mega Turn 900 Dcodow T Tmpopfx Afqer TEHNIČNE ZNAČILNOSTI: CNC krmiljenje: MAZATROL SmoothG Maks. premer struženja: 920 [mm] Maks. premer obdelave: 1000 [mm] Hod X osi: 470 [mm] Hod Z osi: 876 [mm] Hitrost hitrega pomika X osi: 24000 [mm/min] Hitrost hitrega pomika Y osi: 24000 [mm/min] Vreteno – povezava: A2-15 Maks. hitrost vretena: 1250 [vrt/min] Moč vretena: 30 [kW] Navor vretena: 3655 [Nm] Min. razdalja od čela vretena do čela revolverja: 154 [mm] Maks. teža obdelovanca: 3000 [kg] Maks. razdalja od čela vretena do čela revolverja: 1030 [mm] Število orodnih postaj: 12 Čas indeksacije revolverja: 0,4 [s/pozicija] Kapaciteta rezervoarja za mazanje: 516 [l] Skupna potrebna moč: 58,9 [kVA] Napajalna napetost: 400 [V] Dimenzije: 2375 × 4558 × 3659 [mm] Teža: 14000 [kg] Dodatne informacije na zahtevo.