Navpični obdelovalni center

MTCut V 110

Stanje: rabljeno, Leto izdelave: 2015, x-premik 1.100 mm y-premik 610 mm z-premik 610 mm Krmiljenje Heidenhain iTNC 640 Dimenzije mize 1.250 x 610 mm Vrtljaji vretena 12.000 min⁻¹ Vreteno SK 40 Dkedpfexg R N Hex Ag Nju Hitri pomik 32 m/min Število orodij: 30 pozicij Stroj je po naši oceni v dobrem rabljenem stanju in si ga je mogoče po predhodnem dogovoru ogledati pod napetostjo. Tehnične značilnosti & oprema: - Transporter za ostružke - Notranje hlajenje skozi vreteno (IKZ) Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključeni v dobavo le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 2008, Travel path - X axis: 1,100 mm Travel path - Y axis: 610 mm Travel path - Z axis: 610 mm Table dimensions (L x W): 1,250 x 610 mm Spindle taper: SK40 Number of tool changer positions: 30 Table diameter: 250 mm Vertical Machining Center | MTcut - V 110 T with NC rotary swivel table (TT251HEE08) The machine is in well-maintained condition. Please refer to the offer for further technical details. Dksdpevzcnnsfx Ag Nju - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V110T | V-110 T | V-110T | V 110T | V110

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 12.214 h, številka stroja/vozila: 111146, The machine is equipped with an IKZ 22 bar. Chip conveyor, handwheel, Heidenhain 530 control. The machine is sold without tools and without a vise. Technical condition is very good; it can be inspected at any time without connection to power. Dkodou A Azuepfx Ag Nou

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 12.958 h, številka stroja/vozila: 121113, used milling machine, internal coolant supply 22 bar, chip conveyor, handwheel, technical condition very good. The machine is sold without tools and without accessories. Inspection under power possible at any time. Dedpfeu A A Dcjx Ag Njku

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 13.202 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 121113, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 30, TECHNICAL DETAILS X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse X/Y/Z: 32 m/min Feed rate range: 1 - 12,000 mm/min Working Area Spindle nose to table: 120 - 730 mm Dkjdpfev D Nlfox Ag Nju Table size: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle System Speed range: 60 - 10,000 rpm Spindle torque: 332 Nm Spindle power: 13 kW (40 % duty cycle) Spindle cooling: Oil-cooled Tool Changer Number of tools: 30 stations Tool-to-tool change time: 1.5 s Max. tool weight: 7 kg Max. tool diameter: 76 mm Max. tool diameter with adjacent slot free: 140 mm Max. tool length: 300 mm Pull studs: DIN 69871 Coolant & Hydraulics Coolant tank: 250 l Hydraulic oil: R32 (ISO32) Compressed air connection: 3/8", 6-8 bar Through-spindle coolant (IKZ): 22 bar MACHINE DETAILS Machine weight: 7,500 kg Power supply: 400 V / 75 A / 3-phase Connected load: 35 kVA Machine dimensions: 2,830 x 3,130 x 2,840 mm Control on-time: 31,887 h Machine on-time: 32,618 h Spindle hours: 13,202 h EQUIPMENT - Chip conveyor - Handwheel Any vices, tool holders, and chucks shown are not included in the scope of delivery!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 14.124 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111146, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, model krmilnika: Heidenhain 530, največja hitrost vretena: 10.000 obr/min, TECHNICAL DETAILS Control: Heidenhain 530 X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Working Area Distance spindle nose to table: 120 - 730 mm Table size: 1,250 x 610 mm T-slots on table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle System Speed range: 60 - 10,000 rpm Spindle torque: 332 Nm Spindle power: 13 kW (40%) Spindle cooling: oil-cooled Traverse Speeds Rapid traverse X/Y/Z: 32 m/min Feed rate range: 1 - 12,000 mm/min Tool Changer Number of tools: 30 stations Tool-to-tool change time: 1.5 s Max. tool weight: 7 kg Max. tool diameter: 76 mm Dodpfxov D Ndze Ag Neku Max. tool diameter with adjacent slot empty: 140 mm Max. tool length: 300 mm Pull stud: DIN 69871 Coolant & Hydraulics Coolant tank: 250 l Hydraulic oil: R32 (ISO32) Compressed air connection: 3/8", 6-8 bar Internal coolant supply (ICS): 22 bar MACHINE DETAILS Machine weight: 7,500 kg Power supply: 400 V / 75 A / 3-phase Connected load: 35 kVA Machine dimensions: 2,830 x 3,130 x 2,840 mm Control on-time: 34,988 h Machine on-time: 39,243 h Spindle hours: 14,124 h EQUIPMENT - Chip conveyor - Handwheel Any visible vices, tool holders, and chucks are not included in the scope of delivery!