Obdelovalni center - navpično

MTcut V 110 T

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 12.214 h, številka stroja/vozila: 111146, The machine is equipped with an IKZ 22 bar. Chip conveyor, handwheel, Heidenhain 530 control. The machine is sold without tools and without a vise. Technical condition is very good; it can be inspected at any time without connection to power. Fgedpou A Azujfx Abtjc

Stanje: rabljeno, Leto izdelave: 2011, Technical Data: X-travel: 410 mm y-travel: 610 mm z-travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table dimensions: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Fsdpfx Abjwlhvwetegc Total power requirement: 35 kVA Machine weight approx.: 7.4 t Required space approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining center, NC rotary swivel table, C-axis 360°, B-axis +30-120°, Chip conveyor, Internal coolant supply 20 bar, 3D probing system, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h "machine on", approx. 3,500 spindle hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111146, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, največja hitrost vrtenja: 10.000 obr/min, model krmilnika: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: oil-cooled Fgsdpfx Abjyzxz Notjc Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 positions Tool change time (tool-to-tool): 1.5 s Max. tool weight: 7 kg Max. tool diameter: 76 mm Max. tool diameter with empty adjacent slot: 140 mm Max. tool length: 300 mm MACHINE DETAILS CNC control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guideways X/Y/Z: Linear 45/45/45 mm Machine bed: cast iron Machine weight: 7,500 kg EQUIPMENT Internal coolant supply 22 bar Tool changer with 30 positions oil-cooled spindle central lubrication coolant tank linear guideways X/Y/Z chip conveyor handwheel Note: The machine is sold without tools and vice.

Stanje: dober (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 32 m/min, hitri pomik os Y: 32 m/min, hitri pomik na osi Z: 32 m/min, največja hitrost vrtenja: 10.000 obr/min, Krmilni sistem: Heidenhain iTNC 530 Tehnične specifikacije: Pomiki osi: Osa X: 1.100 mm Osa Y: 610 mm Osa Z: 610 mm Hitri pomik (X/Y/Z): 32 m/min Podajalna hitrost (X/Y/Z): 12 m/min Razdalja površina mize – čelo vretena: 120 - 730 mm Maks. hitrost: 10.000 1/min Navor: 332 Nm Pogonska moč: 13 kW Vpenjalni sistem orodja: SK 40 Število orodnih mest: 30 Velikost mize: 1.250 x 610 mm Maks. obremenitev mize: 900 kg Fgsdpfjx Hfnmsx Abtsc Priključna moč: 35 kW Teža stroja: 7.500 kg Transporter za odrezke Notranje hlajenje (IKZ): 22 barov Rezervoar za hladilno tekočino: 250 litrov Zrak skozi sredino vretena

Stanje: novo, moč: 25 kW (33,99 KM), potovalna razdalja osi X: 1.430 mm, pomik osi Y: 670 mm, pomik po osi Z: 640 mm, teža obdelovanca (maks.): 1.200 kg, število mest v zalogovniku orodij: 30, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.900 mm, skupna dolžina: 4.855 mm, skupna širina: 2.945 mm, skupna masa: 11.000 kg, Oprema: CE označba, dokumentacija / priročnik, LAGUN L 1400 Machining Centre – available at short notice The LAGUN L 1400 machining centre stands for high precision, robust construction, and cost-effective production. Ideal for single part and series manufacturing in machine building, tool & die making, and contract machining. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / hire purchase available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), renowned for robust design, high dynamics, and durable machine concepts. The machining centres are impressively reliable, easy to maintain, and offer low operating costs. Technical specifications: Control system: HEIDENHAIN TNC 7 CNC control HEIDENHAIN 16" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Fgedpfxohy Atfj Abtsc Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-hinged viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and commissioning included ✔ Reference machines available in Germany Contact us – we will gladly advise you and provide a customised quotation.

Stanje: rabljeno, Leto izdelave: 2011, x-pomik 630 mm y-pomik 560 mm z-pomik 560 mm Krmiljenje iTNC 530 Heidenhain Območje vrtljajev – glavno vreteno maks. 12.000 min⁻¹ Pogonska moč – glavno vreteno 10 / 15 kW Maks. navor 130 / 87 Nm Vpenjalni sistem orodij HSK-A 63 Nagibno NC: ° Uporabna površina mize 1.000 x 600 mm Premer mize Ø 600 mm T-utori 1x 14 x H7, 8x 14 H12 Maks. obremenitev mize 500 kg Zasuk mize C: 360° Število mest za orodja 2x12 (24) poz. Vpenjalni sistem orodij HSK-A 63 Maks. premer orodja 80 mm Maks. premer orodja pri prosti sosednji odprtini 130 mm Maks. teža orodja 8,0 kg Maks. dolžina orodja 315 mm Fgodpfx Asyz Dcfobtec Skupna potrebna moč 45 kVA Teža stroja cca 6,8 t Potrebni prostor cca 4,5 x 4,5 x 2,5 m CNC obdelovalni center univerzalni DECKEL MAHO - DMU 60 monoBLOCK - Zasukalna glava za rezkanje - Tropski paket

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm Fgjdpfx Ajuha Umsbtjc - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 655 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: Fanuc 0i-MD, dolžina obdelovanca (maks.): 400 mm, širina obdelovanca (maks.): 355 mm, teža obdelovanca (maks.): 250 kg, skupna višina: 3.120 mm, skupna dolžina: 2.995 mm, skupna širina: 2.975 mm, premer vrtljive mize: 350 mm, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 15 letvica, moč vretenovega motorja: 15 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 270 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Rabljen 5-osni vertikalni obdelovalni center s CNC FANUC 0i-MD Fsdex N Tm Nopfx Abtogc

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 180.000 kg, dolžina brušenja: 11.000 mm, premer brusilnega koluta: 1.066 mm, skupna dolžina: 11.700 mm, hod vretena: 11.700 mm, teža obdelovanca med konicami: 180.000 g, razdalja med središči: 11.700 mm, POMINI CNC Rullslipmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansystem – sliparens och arbetsstyckets rörelsebanor är separata. Maskinens precision: Rakehet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Kronprofil (max kronhöjd): upp till 0,1 mm ±0,002 mm/m Ytfinish utan svängmärken och utan matningsspår efter finslipning. På separat bädd: Automatisk skjutmått, diameter 870–2.250 mm Virvelströmsprovare för sprickor och slag Ultraljudsdjupmätning upp till 180 mm Högtrycks spolning av slipskivan Automatisk eller manuell dynamisk balansering av slipskiva (elektromagnetisk) Diamantutrustad slipskivsformare (slipdressing) 2 hydrostatiska stöd 2 hydrodynamiska stöd 4 mjukstartpositioner för valsar Snabbväxlingsanordning för slipskiva inkl. motor Svängkran Vibrationsmätning och loggning på: Längsbädd vid huvudlagring Nackstöden Bakre upplag Slipspindelhuvud Bakre sliphuvud Vagnens sidosida Arbetsområde: Slipning längd: 11.000 mm Max diameter med 1.066 mm slipskiva: 2.200 mm Min diameter med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Maximal valsvikt: 80 ton (utan stöd), 180 ton (med stöd) Minsta avstånd mellan slipskivans centrum och valsaxel: 845 mm Största avstånd mellan slipskivans centrum och valsaxel: 1.635 mm Bäddlängd, axel Z (hydrostatisk): Matning, steglöst 0–6.000 mm/min Oljefilmstjocklek: 0,020 mm Avstånd mellan vaggbäddar: 1.500 mm Bäddbredd: 160 mm Vagnens längd på bädden: 3.385 mm Slipspindelhuvud (axel X), slipskiveprob (axel A), inspektionsaxel A1: Slipspindelns tvärrörelse (kulkruv), axel X: 940 mm Upplösning axel X: 0,0001 mm Fgodpowdmy Sjfx Abtec Slipspindelns längd: 1.695 mm Spindellagers hydrostatisk diameter: 254 mm Manuell finskala, axel X: 0,00001 mm / division Kontinuerlig matning av slipskivan, U-axel: 0–0,35 mm/min Snabbmatning slipskiva, axel X: 0–830 mm/min Slipmotor (AC): 130 kW Slipspindelns varvtal: 400–1.100/1.600 rpm Slipningens yt-hastighet: steglöst Ythastighet slipskivdiameter 1.066 mm: 45 m/s Ythastighet slipskivdiameter 670 mm: 45 m/s Slipskivehål diameter: 508 mm Slipskivetjocklek: 76–152 mm Slipskivediameter: 670–1.066 mm Kroning, U-axel: Maximal krona på diameter: 10 mm Maximal konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets varvtal: 5–50 rpm Huvudspindelmotor: 200 kW Max transmiterbart moment: 76,5 kNm Plansystemsdrift: V-remmar Max centrumdiameter, metriskt: 160 mm Pinolslag: 150 mm Huvudspindellängd: 3.110 mm Bakspindel: Pinoldiameter: 260 mm Pinolens slag: 750 mm Max centrumdiameter, metriskt: 160 mm Kon: Metrisk 5 % på diameter Bakspindellängd: 1.300 mm Bakspindelslag: 8.000 mm Skjutmått, arm Axel C, vagn Axel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Fgjdpfsifn N Nox Abtec Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately