CNC stružnica

MTcut T30MC

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 669 mm, premer struženja: 330 mm, potovalna razdalja osi X: 260 mm, pomik po osi Z: 762 mm, CNC control Sinumerik 828D Nsdpjukcvgefx Adpowp 12-position Sauter turret VDI40 Driven tools C-axis 3-jaw chuck Integrated measuring arm Parts catcher Chip conveyor Tailstock Coolant system with high-pressure pump Iemca bar feeder Technical Data: Swing over bed: 600 mm Max. turning diameter: 330 mm Max. turning length: 669 mm X-axis travel: 260 mm Z-axis travel: 762 mm Spindle speed: 3400 rpm Turret head: 12 positions Max. bar diameter: 75 mm Rapid traverse X: 20 m/min Rapid traverse Z: 24 m/min Machine weight approx.: 5700 kg Technical data, accessories, and machine description are not binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Control system: GE FANUC 21i-TB Swing diameter: 533 mm Turning diameter: 340 mm Turning length: 355 mm X-axis travel: 209 mm Z-axis travel: 355 mm Spindle bore: Ø50.8 mm Spindle speed: 5,000 rpm Chuck max. Ø200 mm Turret: 12-station Rapid traverse: 30 m/min Drive power: 11 kW Spindle nose: A2-6 Tool holder: VDI30 C-axis: 0.001° (programmable) Dimensions (LxWxH): 2300 x 1700 x 1700 mm Weight: approx. 3,000 kg Nwodpfx Ajvw Uqaodpop Equipment & Accessories: - Hydraulic chuck - Short bar loader EMT Super 80 - Manual Guide in FANUC software - Driven tool turret and C-axis - Tailstock - Parts catcher - Manuals Very good condition. The machine operates accurately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, GEBRAUCHTE Taiwan Takisawa EX-108 Hochleistungs-2-Achsen-CNC-Drehmaschine Seriennummer: CA11E80453, Baujahr 2000 HINWEIS: Dies ist das 2-Achsen-Modell EX108, nicht das 3-Achsen-Modell EX308. • Schwere Schrägbett-Gusskonstruktion • Fanuc 21iT CNC-Steuerung • 4-fach schwere Linearführungen • Hochgeschwindigkeits-Servorevolver • Werkzeug-Einstellvorrichtung • 8" 3-Backen-Hohlspannzylinder hydr. Spannfutter • Stückzähler • Werkzeughalter im Lieferumfang enthalten Max. Umlaufdurchmesser über Bett: 400 mm Max. Umlaufdurchmesser über Planschieber: 320 mm Spitzenweite: 645 mm Standard Drehdurchmesser: 216 mm Max. Drehdurchmesser: 320 mm Max. Drehlänge: 530 mm Stangendurchlass: 52 mm X-Achse Verfahrweg: 180 mm Z-Achse Verfahrweg: 530 mm Spindeldrehzahlen: 60 – 4000 U/min Spindelnase: A2 – 6 Spindelbohrung: 63 mm Revolverkopf: 12 Stationen Reitstockverfahrweg: 435 mm Reitstockpinolenhub: 100 mm Reitstockpinolenaufnahme: MK 5 Eilgang (X & Z): 20 & 24 m/min Nwjdot E Hvgopfx Adpsp Handvorschub (X & Z): 0 – 1260 mm/min Spindelmotor: 7,5 / 11 kW Elektrik: 415V, 3PH, 50HZ Aufstellfläche: 2240 mm x 1645 mm Maschinengewicht: 4300 kg

Stanje: rabljeno, Leto izdelave: 2001, Grinding length: 4200 mm Grinding width: 1300 mm Workpiece height: 550 mm Control system: Siemens 840D Passage width: 1300 mm Electromagnetic table: 4200 x 1300 mm Grinding height: 550 mm Grinding motor: 306 kW Nodpfx Adethumujpswp Grinding motor speed: up to 370 rpm Grinding motor feed, infinitely variable: 0.5–35 m/min Coolant flow rate: 2000 l/min Machine weight: approx. 50 t Space requirement: approx. 11.21 x 5.25 x 3.85 m Equipment / Accessories: - Segment head - Diameter: 1400 mm - For segment dimensions: 120/106 x 41 x 250 mm - Number of segments: 1 set = 26 pieces - Grinding motor infeed - In steps: 0.002 - 1 mm - Continuous: up to 5 mm/min, stepless

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre Nodpfx Aeiva Dkedpjwp – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)

Stanje: rabljeno, Details on request. Nodpfxjdgxnys Adpswp

Stanje: rabljeno, Leto izdelave: 2016, dolžina podajanja os X: 711 mm, dolžina pomika po osi Y: 406 mm, dolžina podajanja os Z: 394 mm, Pomiki osi X Y Z: 711 x 406 x 394 mm; velikost mize: 864 x 381 mm; nosilnost mize: 113 kg; hitrosti hitrega pomika: 61 m/min; moč vretena: 15 KM; hitrost vretena: 15.000 vrt/min; stožčasta vpetja vretena: BT40; 18-postajni avtomatski menjalec orodja (ATC); CNC krmilje Haas; hladilna tekočina; odvijalnik ostružkov. Nwodpfxov Sut Rs Adpep

Stanje: pripravljen za uporabo (rabljen), Wheel diameter – max. 150 mm Wheel width 1 – 200 mm Module – max. 4 Module – min. 1 CNC Control: Sinumerik 840 D Table diameter: 140 mm Axial adjustment – max. 200 mm Cutter mounting: ISO 40 Maximum cutter diameter: 130 mm Nwsdsvzhg Nopfx Adpop Maximum cutter length: 220 mm Infinitely variable cutter speed: 300 – 1,200 rpm Maximum cutter traverse: 170 mm Milling head swivel range: +/– 45° Feed rate: 1 – 1,500 mm/min Rapid traverse rate: 3,000 m/min Maximum workpiece diameter (in magazine): 150 mm Total power requirement: 50 kW Machine weight: approx. 8.5 t Space requirement: approx. 4.7 x 3.6 x 2.6 m Used CNC Gear Hobbing Machine, manufacturer: Pfauter, year of manufacture: 1992, completely overhauled in 2013 by the specialist company SerWeMa, equipped with Siemens Sinumerik 840 D CNC and workpiece magazine. This is a used machine; therefore, sale is made under exclusion of any warranty.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Machine weight approx.: 8 t Required space approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-axis travel: 170 mm Z-axis travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Nwodpfxjizlh Hj Adpop Pick-up machine *

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 660 mm, največja hitrost vretena: 80.000 obr/min, CNC GE FANUC 16 - M WORKING AREA - GRINDING WHEEL SPINDLE HEAD: Spindle Speed, stepless variation: - With electric motors: rpm 4,500 – 80,000 - With air turbines: up to rpm 100,000 and 160,000 Grinding wheel head rotational speed, stepless variation: - With planetary movements: rpm 5 - 300 - With CNC / C axis: rpm 0 – 20 Z-axis Stroke Speed: - With Z stroke control, stepless variation: mm/min 0.5 – 14,000 - Maximum stroke frequency: Hz 5 Grinding wheel spindle quill: - Z-axis stroke length, stepless: mm 170 - Z-axis stroke length (manual operation): mm 180 - Diameter: mm 100 - Weight compensation: pneumatic Radial wheel infeed, NC / U: mm 5.5 Capacity Cylindrical grinding (with Ø 100 mm wheel) - Without intermediate plate: Ø 230 mm - With intermediate plate: Ø 360 mm - Z-axis grinding length: mm 125 WORKING RANGE: X-Axis travel (table slide): mm 1,200 Y-Axis travel (wheel head): mm 660 W-Axis (moving crossbeam): mm 635 Njdpsv Ay E Hofx Adpowp FEED RATES: In X and Y axes (CNC control) - Working feedrate: mm/min 0 – 2,000 - Rapid traverse: mm/min 4,000 In W-axis: mm/min 800 POSITION READOUT: X and Y axes: mm 0.0001 Z axis: mm 0.001 C axis: mm 0.001° U axis: mm 0.0001 Reference point: selectable TABLE: Usable table surface: mm 1,320 x 860 Permissible table load: kg 800 T-slot width: mm 14 Number of T-slots: 7 T-slot spacing: mm 100 TOOL MAGAZINE: Number of magazine slots: 8 Max wheel diameter: mm 50 Max complete wheel length: mm 135 Taper mount: HSK 25 Machine complete with: • Tank with paper filter • MSS Multi-Sensoric System • Fire extinguishing system • Oil mist extractor (de-oiler) • Instruction manuals and CE declaration