Zvezda Pregled Rastlin nakup rabljenega (1.815)

Stanje: dober (rabljeno), Trenjevo kolo, tekalno kolo, mostno dvigalo, halno dvigalo, montažno dvigalo, prirobnična pesta, zvezda sklopke za čeljustno sklopko - Zvezda sklopke: za voziček dvigala .: 1031 4149 - Tip: del 20 za SDDL-5-200 - Mere: glej fotografije - Količina: na voljo 2 kosa Dkjdjv Hw Adepfx Ah Soi - Cena: na kos - Dimenzije: Ø 194 x 34 mm - Teža: 0,5 kg/kos

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, vhodna napetost: 240 V, vrsta vhodnega toka: Klimatska naprava, Rudolph Technologies / Onto Innovation avtomatsko inline orodje za pregled rezin AXi 940 b Dodpowgm Easfx Ah Sski Model: AXi940b Obratovalne ure žarnice:

Stanje: zelo dobro (rabljeno), Here we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance & process control throughout the entire solar module production process. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the manufacturing of crystalline silicon solar modules. These turnkey vision systems offer dependable quality control for the entire ongoing production process. With continuous monitoring of production, corrective actions can be promptly initiated in the event of process deviations. In crystalline silicon solar module manufacturing, structured glass substrates are used instead of uncoated glass. Structured glass increases sunlight transmission. Optical signals in the vision system triggered by the surface structure typically used for glass substrates in silicon solar modules often resemble—or even exceed—those of actual defects being inspected. Dr. Schenk has developed and produced the SolarInspect system, specifically designed to distinguish precisely between glass structure and defects across the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk’s inspection system can clearly identify glass defects and differentiate them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated structured glass - Coated glass, e.g. AR Dodped N Ervjfx Ah Soki - Layer deposition - Finished modules Detection of: - Float glass defects, e.g. bubbles, inclusions, scratches - Dimensions - Edge defects - Coating defects, homogeneity and thickness of AR-coated glass SolarInspect – Exceptional Features: - Innovative and modular optical design – Low operating costs - Turnkey vision systems optimized for specific process step requirements - Custom solutions for all types and sizes of solar modules - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industry-proven design Type: SolarInspect Condition: used Sale from location. Scope of delivery: (See picture) (Subject to change and errors in technical data and information!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vision Engineering Specifications of the Vision Engineering Microscope: Eyepiece-free Three-dimensional observation 3.5x - 120x stereo-zoom magnification Features: Optical type: Application: Laboratory, inspection, research, forensics, dental laboratory, welding Observation technique: 3D Configuration: benchtop device Options and accessories: USB camera, zoom Magnification Min: 3x / Max: 240x Description: Dodpfotqnkljx Ah Seki Lynx EVO was designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge – inspection, reworking, or review – you will work more comfortably and with greater focus thanks to high-resolution, high-contrast 3D stereo images. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Increased efficiency: Lynx EVO provides improved hand-eye coordination, more working space for tools, and better peripheral vision for easy interaction with the broader work environment, changing the way you work. No adjustment of eyepieces is necessary, making it easy to share the device between multiple users for maximum return on your investment. Condition: used Scope of delivery: (See image) (Specifications and details are subject to change or error!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2001, Kontrola polnih zabojev Proizvajalec: Fa. Metec Model: Prom 1000 VKK Programi: 18, 20 ali 24 steklenic Leto izdelave: 2001 Stroj (dodatno): Kontrola polnih izdelkov Kapaciteta: 1500 zabojev/uro Dolžina: 2100 mm Širina: 2000 mm Višina: 1600 mm Formati: 20 steklenic, 24 steklenic, 18 steklenic Namestitev: nameščeno na valjčnih progah Osnovna konstrukcija: Vijakane kvadratne cevi Djdpfx Ahsw Tmiwe Sjki Oprema: Elektronska omarica, merilni instrumenti, sistem izločanja napak z zbirno valjčno progo

Stanje: dober (rabljeno), Motor protection switch, star-delta switch -Type: MYehb -Price: per unit -Quantity: 18 available -Weight: 2 kg Dksdob A Scwjpfx Ah Soi

Stanje: dober (rabljeno), Motor protection switch, star-delta switch, reversing switch -Type: MDPPehb Djdpfx Ahob A Sc Ee Soki -Adjustment range in amperes: 4.9/5.5 -Quantity: 16 switches available -Price: per piece -Weight: 2 kg

Stanje: dober (rabljeno), Motor protection switch, star-delta switch, reversing switch -Type: NNWYehb 15 -Adjustment range in amperes: 1.3 - 2.0 -Price: per unit -Quantity: 10 units available -Weight: 0.8 kg Dksdob A Sczepfx Ah Sei

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Used inline automatic 3D inspection system (AOI) for assembled PCBs. Detected faults: displacements, bent pins, etc. Year of manufacture: 2016 Please submit your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. Technical data can be found in the handout. Sold without packaging; all warranty rights are excluded. Dkjdpfx Asw Dfqpoh Ssi If you intend to dismantle the system yourself, please indicate this in your offer. We do not guarantee the accuracy of technical data, the completeness of accessories and tools, or compliance with all safety and environmental protection requirements as specified in accident prevention regulations.

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Nr. 291, used inline automatic 3D solder paste inspection system (AOI) for SMT. Fault pattern: defective solder paste printing. Year of manufacture: 2013 used inline automatic 3D inspection system (AOI) for assembled PCBs. Faults: placement errors, bent pins, etc. Several machines available. Years of manufacture: 2013 - 2016 ---- Please state your offer price. Sale only within Europe (EU), including Turkey; United Kingdom, Switzerland. ---- Dodpfjw Dfh Isx Ah Seki Technical data: see handout. No packaging; any warranty rights are excluded. If you wish to carry out the dismantling yourself, please indicate this in your bid. We accept no liability for the accuracy of the technical data, for the completeness of accessories or tooling, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Zeile 270, Rabljeni avtomatski inline 3D AOI (Avtomatski Optični Pregled) sistemi za pregled vgrajenih tiskanih vezij (PCB). Napake, ki jih sistem zazna: zamiki komponent, zviti pini itd. Na voljo je več naprav, letniki 2013 – 2016. ----- Prosimo, navedite svojo ponudbeno ceno. Prodaja je možna izključno znotraj Evrope (EU) ter v Turčiji, Veliki Britaniji in Švici. ----- Tehnične podatke najdete v priloženem dokumentu. Dkjdpowzv Itsfx Ah Sji Brez embalaže; vsakršna garancijska pravica je izključena. Če boste napravo želeli demontirati sami, nas, prosimo, o tem obvestite v svoji ponudbi. Ne prevzemamo odgovornosti za pravilnost tehničnih podatkov, popolnost dodatne opreme in orodij oziroma za izpolnjevanje vseh varnostnih in okoljskih zahtev iz določil o varstvu pri delu.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Nr. 011, Used inline automatic 3D solder paste inspection systems (AOI) for SMT. Fault description: Faulty solder paste printing. Multiple systems available, years of manufacture: 2011–2015. Dksdpjwzv Adsfx Ah Ssi Used inline automatic 3D inspection systems (AOI) for assembled PCBs. Fault description: misplacements, bent pins, etc. Multiple systems available, years of manufacture: 2013–2016. Please provide your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. For technical specifications, please refer to the attached handout. Offered without packaging; any warranty rights are excluded. If you wish to dismantle the equipment yourself, please indicate this in your offer. We do not assume any liability for the accuracy of technical data, the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements as stipulated by accident prevention regulations.

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height) 0x0x0 mm Weight 0 kg Total power requirement 2.5 kW Gluing Star ROTORMAX 40 X 12 HYDRAULIC Dedpfxsv A E Rzs Ah Sski - Working length: 4000 mm - Working width: 1200 mm - Gluing thickness: 20 - 80 mm - Number of levels: 3 - Manual rotation - Pressing is performed with a single-sided hydraulic cylinder - Number of cylinders per level: 8 - The pressure cylinders are fixed - Cylinder type: Ø 50 x 150 mm - Specific pressure: 7 kg/cm² - Number of hold-downs per level: 4 - Each hold-down has a pneumatic cylinder - Pneumatic cylinder type: Ø 50 x 75 mm - Each hold-down has its own air valve for on/off - Pressure regulation with regulator - Hydraulic unit - Pump flow rate: 10.0 l/min - Hydraulic motor power: 2.5 kW - Max. pressure for hydraulic motor: 30 – 160 bar - Parking position for the hold-downs

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 2 kW Gluing Star ROTORMAX 25 x 12 HYDRAULIC - Working length: 2500 mm - Working width: 1200 mm - Gluing thickness: 20 - 60 mm - Number of layers: 3 - Manual rotation - Pressing is performed with a single-sided hydraulic cylinder - Number of cylinders per layer: 5 - The pressure cylinders are fixed - Cylinder type: Ø 50 x 150 mm - Specific pressure: 6 kg/cm² - Number of hold-downs per layer: 2 - Each hold-down has its own pneumatic cylinder Djdpfov A E Rhjx Ah Seki - Pneumatic cylinder type: Ø 50 x 100 mm - Each hold-down has its own air valve for on/off - Pressure regulation with regulator - Hydraulic power unit - Pump flow: 6.3 l - Hydraulic motor power: 2 kW - Max. pressure for hydraulic motor: 30 – 150 bar - Parking position for hold-downs

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kW Gluing star ROTORMAX 25 x 12 PNEUMATIC - Working length: 2500 mm - Working width: 1200 mm - Gluing thickness: 20 - 60 mm - Number of levels: 3 - Manual rotation - Pressing performed by pneumatic cylinders - Number of cylinders per level: 5 - The pressure cylinders are fixed - Cylinder type: Ø 100 x 150 mm - Specific pressure: 1.8 kg/cm² - Number of hold-downs per level: 2 - Each hold-down with one pneumatic cylinder - Pneumatic cylinder type: Ø 50 x 75 mm - Each hold-down has its own air valve for On/Off - Pressure regulation via regulator - Max. pressure: 8 bar - Parking position for hold-down Dodpfxjv A E Rns Ah Sjki

Stanje: novo, Leto izdelave: 2025, Dosing ranges: 1 ml – 38 ml 2 ml – 100 ml 5 ml – 250 ml Dkodpfjwpr Tbjx Ah Soi 20 ml – 680 ml 50 ml – 1,500 ml Bottle feed via bottle unscrambler or stainless steel rotary table Volumetric filling Sub-surface filling possible Adjustable filling nozzles Pumps and filling nozzles made of stainless steel AISI 316 L Multi-format stars for various bottle diameters Automatic or manual cap application Stepless torque adjustment for capping Capping system for plastic caps and, optionally, for aluminum caps Bottle transport via modular conveyor chain (3,000 mm, depending on configuration) Display control Optional labelling possible Manufactured in Rhineland-Palatinate, Germany

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Proizvajalec: MEKITEC Finska Tip: rentgenska naprava za pregled hrane Leto izdelave: 2017 Nazadnje uporabljena v industriji mlečnega prahu MEKITEC rentgenski pregledni sistem – Maksimalna varnost izdelkov za živilsko industrijo Dksdpfxexq E Dye Ah Sei Izboljšajte zagotavljanje kakovosti svoje proizvodnje z MEKITEC rentgensko pregledno napravo – zanesljivo rešitvijo za odkrivanje tujkov in napak izdelkov pri predelavi živil. Kompakten sistem združuje vrhunsko zmogljivost detekcije z energetsko učinkovito tehnologijo in je idealen za vse vrste pakirnih linij. ✅ Zaznavanje kovin, stekla, kamna, kosti, plastike in drugih tujkov ✅ Higienska zasnova v skladu s prehranskimi standardi ✅ Enostavno upravljanje in integracija v obstoječe proizvodne linije ✅ Zmanjša količino izmeta in zagotavlja kakovost blagovne znamke

Stanje: pripravljen za uporabo (rabljen), delovna dolžina: 1.100 mm, delovna širina: 2.100 mm, višina izdelka (maks.): 50 mm, Press for gluing (verleimpresse) Manufacturer: Polzer Model: EVA Gluing star with 6 gluing levels, each equipped with 2 special heating plates Gluing dimensions: 2100 mm x 1100 mm Includes glue application station Equipped with 2 lifting devices for loading and unloading panels With roller conveyor Maximum workpiece thickness: approx. 50 mm For removal, panels are lifted pneumatically Djdpewr Tyzefx Ah Sjki Per gluing level: - 7 pneumatic pressure cylinders, 100 mm diameter - 100 mm stroke, pressure force 740 kg per cylinder - Movable pressure plate: 250 mm x 40 mm - 2 cylinders for operating the upper heating plate - Loading opening: 700 mm - 2 electric heating plates per level - Each electric heating plate: 220/380V, 3 kW, thermostats adjustable from 0 – 120°C Operating pressure: 8 – 10 bar Adjustable gluing temperature, ideally 50-65°C Output: approx. 50 m²/h Fitted with protective guard External dimensions: approx. 4000 mm x 4000 mm x 3600 mm

Leto izdelave: 2023, stanje: rabljeno, Intended use: Ground maintenance Tyre size: - Drive: Wheel Power: 4 kW (6 HP) Unladen weight: 772 kg Maximum speed: 30 km/h Serial number: L4MCKDK4XNA001244 Transport dimensions (L x W x H): 2.38 x 1.17 x 1.87 m Dsdpfx Ahstr Tdtj Seki Please contact PFEIFER GROUP for further information.

Leto izdelave: 2022, stanje: rabljeno, Intended use: Land management Tire size: - Drive type: Wheel Power: 4 kW (5 HP) Unladen weight: 640 kg Maximum speed: 24 km/h Transport dimensions (L x W x H): 4.15 x 1.18 x 1.9 m Please contact PFEIFER GROUP for further information. Djdpfxstr Tdzj Ah Soki

Leto izdelave: 2023, stanje: rabljeno, Purpose of use: Grounds management Tyre size: - Drive: Wheel Power: 3 kW (4 hp) Unladen weight: 490 kg Maximum speed: 24 km/h Serial number: L4MCUCM47PA000041 Transport dimensions (L x W x H): 2.43 x 1.16 x 1.8 m Please contact PFEIFER GROUP for further information. Dodpfxstr Tazj Ah Sski

Leto izdelave: 2022, stanje: rabljeno, Intended use: Off-road management Tire size: - Dsdpfx Ajtr Tdweh Sski Drive: Wheel Power: 4 kW (5 hp) Unladen weight: 560 kg Maximum speed: 24 km/h Transport dimensions (L x W x H): 3.7 x 1.18 x 1.9 m Contact PFEIFER GROUP for further information.

Leto izdelave: 2023, stanje: rabljeno, Intended use: Land management Dksdpjtr Tbqjfx Ah Sei Tire size: - Drive: Wheel Power: 3 kW (4 HP) Unladen weight: 490 kg Maximum speed: 24 km/h Serial number: L4MCUCM46PA000046 Transport dimensions (L x W x H): 2.43 x 1.16 x 1.8 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2006, Stork FIM NT12+ HD Stroj za končno kontrolo perutnine Proizvajalec: Stork Model: FIM NT12+ HD Leto izdelave: 2006 Število enot: 12 Kapaciteta: 8000–9000 kosov/uro (BPH) Dimenzije stroja (D x Š x V): 1.365 x 1.205 x 2.750 mm Teža stroja: 750 kg. Dkodpfx Aev Hx Nfsh Ssi

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: -10°C to +45°C for temperature testing Test chamber volume: approx. 1300 L Simpac controller Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on a modular design. Individual modules can be added or replaced as needed, allowing customization for various applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temperature deviation over time: ±0.5 K Humidity range: 40% to 95% Dodpfx Aov Ivn Ieh Soki Dew point range: +4°C to +35°C Humidity deviation over time: ±3 to 5% r.h. Fresh air supply up to 7.5 m³/h Power consumption without fresh air mode at 25°C / 75% r.h.: approx. 0.8 kW Specifications for climate tests with irradiation: Temperature range: +10°C to +45°C with lights on/+10°C to +45°C Temperature deviation over time: ±0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ±3 to 5% r.h. Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm x Depth 750 mm x Width 1270 mm External dimensions: Height 1985 mm x Depth 980 mm x Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, excellent condition Pipe port: ∅ 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module