Zunanji Navoj nakup rabljenega (1.500)

Stanje: nepreverjeno (rabljeno), Weight: approx. 4,500 kg Fjdowv N Ehopfx Afloft

Stanje: dober (rabljeno), Nosilec za rezanje navojev, glava za navoje, vpenjalna glava za rezanje navojev, rezkalno orodje, aparat za rezanje navojev, dvokraka glava za rezanje navojev -Proizvajalec: Bahmüller, nosilec za rezanje navojev s hitro zatezno vpenjalno glavo -Tip: 18.6012 - Bahmüller SK40x36 A 125 -Vpenjalna glava: Albrecht 1/8-5/8" / 3-16 mm -Dimenzija: Ø 63 x 350 mm -Teža: 4,4 kg Fsdpfjxdxb Eex Afloft

Stanje: rabljeno, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer: PEE-WEE Type: P 24 Q Serial No. LC2403099 Year of manufacture: 2004 Rolling force: max. 24 tons Tool diameter: max. 200 mm Rolling spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Holder length, tool length: max. 180 mm Workpiece diameter: max. 50 mm Rolling spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic motor power: approx. 3 kW Ffedpfx Ash A S Htjflot Roll drive motor power: 5.5 kW Power supply: 400 Volts, 50 Hz - Swiveling rolling spindle for through-feed thread rolling - Rolling spindle speed adjustable in 4 stages via gear shift - Hydraulic system integrated in machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge rolling: Thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to its nominal diameter. The maximum thread length is equal to the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools consist of three sections: lead-in, calibrating area, and run-out. Groove rolls have no pitch and are swiveled by the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle equals the pitch angle in the workpiece.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, SASPI GV4-30 Min. / maks. premer navoja: M4 / M14 Min. / maks. dolžina navoja: 10-150 mm Ffedpfx Afow Uhrijlst Moč motorja (pribl.): 32 kW Proizvodne hitrosti (pribl.): 50-200 kosov/min Pripravljeno za proizvodnjo!

Stanje: rabljeno, Leto izdelave: 2023, Overview This rotary vacuum capping machine was manufactured by Alwid (Germany) in 2023. The machine is equipped with three vacuum capping heads and configured for TO82 twist-off lids on round glass jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is available immediately. Technical Specifications Performance: approx. 1,000–1,400 jars/h Formats: Round jars Ø77/86 mm, 90 mm height; TO82 twist-off lids Operating direction: Right to left Working height: Adjustable from 850 mm Electrical connection: 400 V, 50 Hz, 3-phase/N/PE Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch Ffedpfx Afjxbrzaoljt Conveyor: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm Control: Siemens S7 HMI (German) Construction: Frame made of V2A stainless steel, drip tray, capping unit, CE-compliant safety enclosure with Makrolon panels and safety doors Scope of supply - Alwid Favorit-3SK rotary vacuum capping machine (2023) - Integrated conveyors (1.5 m infeed + 1.5 m outfeed) Note: Sorting module and additional format parts available as options.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 280 0113 4023, STROJ SI JE MOGOČE OGLEDATI V NAŠI TOVARNI V BOLOGNI. Fedpfxewd Shhe Aflsft

Leto izdelave: 2022, Stanje: novo, Pneumatic Tapping Arm Model: R1950-08 Capacity: M2–M8 Speed (rpm): 700 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-12 Capacity: M3–M12 Ffsdpfx Afoipmr Ieljt Speed (rpm): 400 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-16 Capacity: M3–M16 Speed (rpm): 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 27 kg Collet Interface: TCS 2B Model: R1950-020 Capacity: M3–M20 Speed (rpm): 150 / 400 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-022 Capacity: M3–M22 Speed (rpm): 120 / 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-027 Capacity: M3–M27 Speed (rpm): 70 / 220 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic motor - 6 safety clutch adapters of your choice - Mounting column with flange - Radial extension arm (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Ffedpfx Afow Sxyxslet

Stanje: rabljeno, Hydraulic Scissor Lift Table WEIDMANN Type E5/13-1 Serial No. 30403339 Year of manufacture 1982 / 2007 Load capacity: 500 kg Platform size: 2000 x 1200 mm Lift: max. 1280 mm Closed height (table down): 290 mm Extended height (table up): max. 1570 mm Table height with safety support: 1430 mm Lifting speed: 1280 mm in 25 sec. Lowering speed: 1280 mm in approx. 0 to 15 sec. Hydraulic working pressure: approx. 130 bar Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Rotary switch on the hydraulic power pack for up and down Ffjdpohlnznjfx Aflet - Steplessly adjustable lowering speed via throttle valve - 1 lift cylinder - Hydraulic power pack (year 2007) with separate tank - Safety guard frame with limit switches Net weight: 660 kg Good condition

Stanje: pripravljen za uporabo (rabljen), ERLO TCA-40 Vrtalna zmogljivost v jeklu, premer 40 mm (max) Globina grla 360 mm Hod za vrtanje 200 mm Največji navojni premer M33 Stožec vretena MT4 Fodpfx Aou Hyc Djfloft Premer stebra 175 mm Število vrtljajev vretena min/maks 61/1169 min⁻¹ Dimenzije mize 550x550 mm Pripravljeno za proizvodnjo!

Stanje: rabljeno, Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M14I/9064, Številka ponudbe: M14I/9064 Vrsta stroja: Valjar za ploske navoje Info: Nihajni podajalnik Proizvajalec: MENN Tip: GW62 Letnik: 1974 Razpon premerov: 3-8 mm Dolžina stebla pod glavo: 80 mm Maks. dolžina navoja: 55 mm Zmogljivost kosov/min: 300 Lokacija: V Nemčiji Ffedpfxsxnytqs Aflst

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] Fjdpfxeuhb Uhs Afloft - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Leto izdelave: 2023, Stanje: novo, Model: R950-08 Capacity: M2-M8 Speed (rpm): 700 Air Consumption: 750 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 38x29) Weight: 18 kg Adapter Mount: TCS 1B Model: R950-12 Capacity: M3-M12 Speed (rpm): 400 Air Consumption: 750 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 38x29) Weight: 18 kg Adapter Mount: TCS 1B Model: R950-16 Capacity: M3-M16 Speed (rpm): 300 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 38x29) Weight: 25 kg Adapter Mount: TCS 2B Model: R950-020 Capacity: M3-M20 Speed (rpm): 150 / 400 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 58x40) Weight: 29 kg Adapter Mount: TCS 2B Model: R950-022 Capacity: M3-M22 Speed (rpm): 120 / 300 Air Consumption: 950 l/min Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 58x40) Weight: 29 kg Adapter Mount: TCS 2B Model: R950-027 Capacity: M3-M27 Speed (rpm): 70 / 220 Air Consumption: 950 l/min Fsdpfoipmpzjx Afleft Pressure: 6-7 bar Working Range: Max. radius 950 mm Parallel Arm Structure: Robust arm design (rigid aluminium profile 58x40) Weight: 29 kg Adapter Mount: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic motor - 6 safety slip clutches of your choice - Guide column with mounting flange - Radial extension arm (for more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Stanje: novo, Hydraulic Thread Cutting Machine Easy Tap ETH 24 Fjdpfxotbawke Afloft Thread Diameter up to M 24 Speed 0 – 600 rpm Thread Sizes M 5 – M 24 Working Range 2050 mm max. Working Height 920 mm Table Surface 900 x 700 mm Oil Capacity 100 litres Motor Power 3.0 kW Weight: 220 kg Equipment: • Hydraulic thread cutting machine • Includes machine base frame with clamping plate • Mobile (on wheels) • Hydraulic pressure gauge • Infinitely variable speed adjustment from 0 – 600 rpm • Vertical and horizontal threading possible • Special accessories included / Quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Ffedpfjuz If Nsx Aflot Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, SASPI GV3-20 Navojni premer M4-M12 Dolžina osi pod glavo 150 mm Maksimalna navojena dolžina 130 mm Proizvodna zmogljivost 85-220 kosov/min Teža 4400 kg Ffsdpexv Si Tsfx Aflet Moč motorja 14 kW Stanje zelo dobro, pripravljen za proizvodnjo

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M14I/9063, Številka ponudbe: M14I/9063 Vrsta stroja: Vlaknati stroj za valjanje navojev s ploskimi čeljustmi Info: Vibracijski podajalnik Znamka: HILGELAND Tip: FL-10-80 Leto izdelave: 1985 Območje premera: 10 mm Fedpfx Afexnyrtsleft Dolžina stebla pod glavo: 180 mm Maks. dolžina navoja: 80 mm Zmogljivost - kosov/min: 400 Lokacija: V Nemčiji

Stanje: rabljeno, TECHNICAL DATA Ffodpfxjuhb Uns Afljt - Max. workpiece length: 1350 [mm] - Max. tooth length: 1200 [mm] - Max. tooth diameter: 120 [mm] - Power output: 18.5 [kW] - Machine dimensions: 2840 x 1700 x 1420 [mm]

Stanje: novo, Leto izdelave: 2025, The electric tapping machine is a compact and efficient tool used for threading, suitable for both large-scale production plants and small workshops. Thanks to its high-torque servo drive and swivel head, it enables fast and precise thread cutting. Equipped with a cooling system with air blow, the machine ensures optimal visibility of the drilled hole. The tapping arm features two operating modes—automatic and manual—as well as a tightening function. Fsdpfx Afovvlkzslsft Description of the RGE16PW Tapping Machine The electric tapping machine is a versatile threading device that finds application in both large manufacturing plants and smaller workshops. Its main advantage lies in reducing tapping operation time, making the process significantly more efficient. The machine features a simple, compact design equipped with a swivel head, increasing its range of applications. The device is driven by a high-torque servo motor, ensuring robust and reliable operation. For ease of use, the tapping arm is equipped with a touch control panel with a Polish-language menu. This intuitive panel allows easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Standard equipment includes a micro-lubrication system, which provides continuous cooling with minimal use of cutting fluid. Additionally, the machine is fitted with a chip blower to maintain optimal visibility of the drilled hole. The tapping arm is equipped with a quick-release chuck, enabling simple and fast clamping of taps for both through and blind holes. Furthermore, the machine features a rotating motor assembly, making it possible to cut threads at any angle from 0° to 90°. Compared to manual tapping, this machine offers greater accuracy and reliable threading with precise right-angle (90°) alignment. The tap holders are equipped with adjustable overload clutches. The clutches are pre-set to standard torque values for specific tap sizes but can be adjusted using a special key included in the set. The device also features a long-reach rotating arm, facilitating the precise and efficient positioning of the tap on the workpiece. It is suitable for threading in various materials, including steel, stainless steel, aluminum, and non-ferrous metals. The electric tapping machine is a reliable and efficient tool that accelerates the threading process while improving the precision and quality of threads. Due to its versatility and ease of use, it is utilized across industries ranging from industrial manufacturing to craft workshops. Included tap holders: M3, M4, M5, M6-8, M10, M12, M13, M16 The machine is sold without a workbench, vice, or taps. Technical specifications: Power: 0.6 kW Power supply: 230V Weight: 30 kg Maximum arm reach: 1080 mm Maximum spindle speed: 375 rpm

Leto izdelave: 2022, Stanje: novo, Pneumatic Tapping Arm Model: R1450-08 Capacity: M2–M8 Speed (rpm): 700 Air consumption: 750 l/min Pressure: 6–7 bar Working reach: max. 1450 mm Parallel arm construction: Rigid arm structure (hard aluminum profile 38x29) Weight: 23 kg Adapter mounting: TCS 1B Model: R1450-12 Capacity: M3–M12 Speed (rpm): 400 Air consumption: 750 l/min Pressure: 6–7 bar Working reach: max. 1450 mm Parallel arm construction: Rigid arm structure (hard aluminum profile 38x29) Weight: 23 kg Adapter mounting: TCS 1B Model: R1450-16 Capacity: M3–M16 Speed (rpm): 300 Air consumption: 950 l/min Pressure: 6–7 bar Working reach: max. 1450 mm Parallel arm construction: Rigid arm structure (hard aluminum profile 38x29) Weight: 27 kg Adapter mounting: TCS 2B Model: R1450-020 Capacity: M3–M20 Speed (rpm): 150 / 400 Air consumption: 950 l/min Pressure: 6–7 bar Working reach: max. 1450 mm Parallel arm construction: Rigid arm structure (hard aluminum profile 58x40) Weight: 39 kg Adapter mounting: TCS 2B Model: R1450-022 Capacity: M3–M22 Speed (rpm): 120 / 300 Air consumption: 950 l/min Pressure: 6–7 bar Working reach: max. 1450 mm Parallel arm construction: Rigid arm structure (hard aluminum profile 58x40) Weight: 39 kg Fjdpfx Ajipmrkeflsft Adapter mounting: TCS 2B Model: R1450-027 Capacity: M3–M27 Speed (rpm): 70 / 220 Air consumption: 950 l/min Pressure: 6–7 bar Working reach: max. 1450 mm Parallel arm construction: Rigid arm structure (hard aluminum profile 58x40) Weight: 39 kg Adapter mounting: TCS 2B Standard accessories with all models: - Parallel arm - Pneumatic drive motor - 6 safety slip clutches of your choice - Guide column with mounting flange - Radial extension arm (for a more flexible working area) - Maintenance unit - Pneumatic oil for initial filling

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Velikost Navoj Višina Št. kompletov Proizvajalec TR4 M8x1,25 H63 Duplex 2x RSK TR1 M5 H38 Duplex 2x HP TR2 M5x0,8 H54 Duplex 1x HP TR2 M5x0,8 H52 Duplex 1x Profiroll TR3 M6x1 H58 Duplex 2x RSK TR2 M6x1 H48 Duplex 1x Hilgeland TR2 M6x1 H14 Duplex 1x HP TR4 M8x1,25 H30 Single 3x RSK Schabenut TR2 5x25 Single 1x RSK Grobgewinde TR2 M6 H30 Single 1x RSK Schabenut TR3 M8x1,25 H58 Duplex 1x RSK TR3 M10x1,50 H58 Duplex 2x HP TR4 M10x1,50 H25 Duplex 1x RSK TR3 M8x1,25 H65 Duplex 1x HP Ffsdsw If Uujpfx Aflst TR2 M48x1,25 H48 Duplex 2x RSK Naprodaj kot komplet ali posamezno, po najugodnejši ceni.

Stanje: zelo dobro (rabljeno), Enota za rezanje navojev z vodilnim vretenom. Trenutno je vgrajeno vodilno vreteno s korakom 0,8 mm (M5). Hitrost vretena: 750 obr./min. Največja dolžina pomika: 80 mm. S krmilno enoto Controller UC-21U. Zelo dobro stanje. Fodpfxew N E R Ej Afljft

Stanje: rabljeno, Frame micrometers, micrometer screw Ffjdpfx Afofn Am Rjlst - Measuring range: 125 - 150 mm - Delivery: as is, condition as inspected - Accessories: missing, see photo - Other sizes: available - Box dimensions: 330 x 180 x H30 mm - Weight: 1.1 kg

Stanje: rabljeno, dolžina gredi pod glavo: 80 mm, dolžina navoja: 58 mm, Flat die thread rolling machines GW 63 / GW 63SX, various years of manufacture, good condition, top-notch electrics. EW Menn including vibratory feeder, Skako, chute conveyor. Fodpowkqvqsfx Afljft

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: 707, Ingramatic thread rolling machine RP21 RV, year 1997, used Ffedpfx Ajwiu Afsfljt