Zasilni Sistem nakup rabljenega (8.466)

Leto izdelave: 2026, Stanje: kot nova (razstavni stroj), IMMEDIATE AVAILABILITY!!!! Manual cleaning is carried out using specialized gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a specialized spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure is adjustable from 1 to 80 bar. Technical specifications: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optionally up to 150 kg) Spray pressure: adjustable from 1–80 bar Tank capacity: 75 liters / Heating power: 2 kW Standard features: • Blow-off gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel panels above the tank • Top-opening lid with two hand openings and gloves • Hardened glass viewing window • Door opening/closing system assisted by gas springs • Door opening monitored by safety limit switch • Filter on the suction side of the pump (500 micron) • Foot switch for operating the cleaning pump • Internal lighting • 600 mm neoprene gloves (chemical resistant) • Height-adjustable feet +/- 50 mm Options: Ksdpfx Abjf A D Nmobjwt • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Stanje: novo, Leto izdelave: 2023, Automate your cleaning process with equipment from the Superior Series: lifting device with support grid for effortless parts handling, filtration systems for dirt separation, exclusive oil separation system (OPS), and intuitive touch panel. Standard models available from 150 L to 8,000 L. Kwsdef E Nt Dspfx Abbjt TECHNICAL CHARACTERISTICS Exterior dimensions of the machine: 2,140 x 1,540 x 1,720 mm Interior dimensions of the tank: 1,300 x 794 x 670 mm Usable dimensions of the parts basket: 1,270 x 685 x 470 mm Maximum load: 400 kg Worktop height: 980 mm Tank capacity: 692 L Ultrasonic generator power: 4,800 W Ultrasonic operating frequency: 28 kHz Heating element output: 12 kW

Leto izdelave: 2015, Stanje: rabljeno, Dimensions (L x W x H): 700 x 655 x 1,400 mm Filter surface: / m² Number of filter bags: 1 pc. Number of chip collection bags: 1 pc. Weight: 140 kg with control box and start-stop sensor Ksdpfegr Rkxex Abbewt

Leto izdelave: 2016, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Skladiščni sistem Oznaka stroja Vakuumski zlagalec Številka stroja 150.138 Tip vs 16 Dolžina nosilca vozička (vozna pot) 28,5 m Razpon mostu (vozna pot) 16 m Gradbena višina 3600 mm Prehodna višina 2700 mm Maksimalna višina sklada (vklj. s podlagami) 2000 mm Razdalja med skladi 100 mm Natančnost pozicioniranja ± 5 mm Višina podlage 60 mm Višina vhodnega sklada 1900 mm Nastavitev dolžine vakuumskega priklopa Dolžina od 2000 do 4200 mm Sesalna zmogljivost vakuuma 2 x 40 m3/h Kwsdpfoxdtv Rex Abbst Tabela: Dimenzije plošč - Oplemenitene iverne plošče, oplemenitene MDF plošče, oplemenitene HDF plošče, masivne in sestavljene plošče, mizarske plošče, satje Dolžina 1250 - 4100 Širina 330 - 2100 Debelina 4 - 100

Leto izdelave: 2011, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Kwedpfx Aei Ezx Debbst Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, skupna masa: 750 kg, volumenski pretok: 6.000 m³/h, vhodna napetost: 400 V, moč: 9,2 kW (12,51 KM), Clean Air Extraction Unit Felder RL-300 Year: 2013 The unit comes from a training facility and has seen little use in recent years. Maintenance by Felder / maintenance of the fire extinguishing system has been carried out regularly. Documentation, operating instructions, and ATEX protection documents are available. Additional equipment: Kedpex H Tyqsfx Abbewt - Automatic fire extinguishing system (powder extinguisher) - Silencer Technical Data: - Extraction capacity approx. 6,000 m³/h - Maximum negative pressure 2,450 Pa - Extraction port Ø 300 mm - Chip collection volume 2 x 210 liters - Dimensions 3,015 x 970 x 2,280 mm (L x W x H) - Steel impeller - Motor power 9.2 kW Weight: 750 kg Matching ductwork for ceiling installation (NW160-300) with transition pieces and pneumatically operated shut-off slides available on request. All information subject to change, errors excepted, all dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Subject to changes and errors in technical data, information and prices, as well as prior sale. All prices are net plus VAT. Payment by advance bank transfer, including any freight costs, within 14 days after conclusion of the contract. If full payment is not received within this period, the seller reserves the right to cancel the purchase contract. Sale exclusively to businesses as defined in § 14 BGB. The machine is sold with warranty for material defects excluded. This exclusion does not apply to claims for damages due to material defects caused by gross negligence or willful misconduct on the part of the seller or their agent, or in case of injury to life, body, or health. Any existing claims against third parties for material defect liability will be assigned to the buyer. Please understand that I cannot accept liability for compliance with any safety regulations applicable at your site or for the sold machine and its components. Compliance with such safety regulations is the responsibility of the final operator. All contracts I conclude are subject solely to the laws of the Federal Republic of Germany, excluding the UN Convention on Contracts for the International Sale of Goods (CISG). Place of jurisdiction is Mannheim, Germany.

Stanje: rabljeno, Leto izdelave: 2000, Delovno mesto z odsesovalno in filtrirno napravo, primerno za odsesavanje pri ometarskih delih z kotno brusilko ali tudi pri varilnih delih. Ksdpfxoyay Rhe Abbjwt

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 95 202 74, Ta ponudba vključuje popolnoma delujoč in kompleten DELO DELOLUX UV-sistem za utrjevanje, ki je sestavljen iz: DELOLUX pilot A4T krmilne in napajalne enote 2× DELOLUX 20/400 A2 LED površinski svetilki (400 nm) Nosilci za montažo, integrirano hlajenje in vsa originalna visokokakovostna ožičenja DELO je eden vodilnih svetovnih proizvajalcev industrijskih UV-sistemov za utrjevanje, ki se uporabljajo v elektroniki, optiki, proizvodnji medicinskih naprav, preciznem lepljenju in avtomatiziranih proizvodnih linijah. Ta sistem omogoča izjemno intenzivno in enakomerno UV-osvetlitev na veliki površini, idealno za hitro strjevanje lepil in avtomatizirane postopke, kjer sta zahtevani popolna stability in ponovljivost. Priložene komponente: 1) DELOLUX pilot A4T krmilna in napajalna enota Model: A4T Vhodna napetost: 100–240 V AC, 50/60 Hz Poraba energije: 1,45 kW Varovalka: T16 A / 250 V Uporabniški vmesnik: velik zaslon na dotik (prijava, profili administrator/uporabnik) Krmilni priključki: PLC 1–4 (digitalni vhod za upravljanje) Funkcija: centralno upravljanje, monitoring in napajanje LED glav 2) Dve LED glavi – DELOLUX 20/400 A2 Valovna dolžina: 400 nm Hlajenje: zračno hlajene Osvetlitvena površina: 112 × 112 mm Popolna enakomernost za industrijske utrjevalne postopke Obe glavi vključujeta tudi nosilca za montažo + 280 cm dolg kabel Tehnične specifikacije UV LED glave (vsaka): Model: DELOLUX 20/400 A2 Valovna dolžina: 400 nm Hlajenje: zračno hlajene Osvetlitvena površina: 112 mm × 112 mm Serijske številke: navedene na etiketah Dolžina kabla: 280 cm Krmilna enota (A4T): Model: DELOLUX pilot A4T Vhod: 100–240 V AC Moč: 1,45 kW Varovalka: T16A Izhodi: do 4 LED glave Dolžina napajalnega kabla: 180 cm Stanje Popolnoma funkcionalno, preizkušeno z obema LED glavama Svetla svetloba, enakomerna intenzivnost Odlično kozmetično stanje Brez poškodb na konektorjih, filtrih ali LED-matrikah Idealno za: Industrijsko strjevanje lepil, izdelavo elektronike, proizvodnjo zaslonov, montažo tiskanih vezij, proizvodnjo medicinskih naprav, optično lepljenje in avtomatizirane UV-stanice za utrjevanje. Dolžine kablov (priloženo): Napajalni kabel (A4T): 180 cm Kabla za LED glavi: vsak 280 cm Zahvaljujemo se vam za zanimanje za naše presežke strojne in elektro opreme. Ti artikli so bili v naši zalogi že več let, vendar so v funkcionalnem stanju. Zaradi dolgotrajnega skladiščenja so lahko na embalaži vidni sledovi staranja ali obrabe, vendar so vsebine ohranjene v odličnem stanju. Kodjx Emqgepfx Abbowt Želimo biti transparentni glede stanja izdelkov, zato prosimo upoštevajte, da je lahko embalaža rahlo poškodovana, razbarvana ali ima oznake od skladiščenja. To pa ne vpliva na funkcionalnost artiklov. Vse predmete smo pregledali in lahko potrdimo, da so v delujočem stanju. Za varnost vaše pošiljke bomo vestno poskrbeli, da prispe v enakem stanju, kot je zapustila naš obrat. Če imate kakršna koli vprašanja, nas prosim kontaktirajte. Hvala za vaše zanimanje!

Leto izdelave: 1988, Stanje: rabljeno, Bihler B-4/2 Ksdpehitxdsfx Abbswt Sistem za varilno krmiljenje. Priključek: 400 V, 50 Hz. Opremljen z varilnim modulom ET50.6. Letnik proizvodnje: 1988/04. Izdelano v Nemčiji. Na zalogi več strojev znamk Bihler in Bruderer.

Leto izdelave: 1988, Stanje: rabljeno, Bihler B-4/2 Varilni krmilni sistem. Priključek: 400 V, 50 Hz. Opremljen z varilnim modulom ET50.6. Leto izdelave: 1988/04. Proizvedeno v Nemčiji. Na zalogi več Bihler in Bruderer strojev. Kjdpfx Abshit E Dsbewt

Stanje: rabljeno, Leto izdelave: 2023, kapaciteta rezervoarja: 100.000 l, SPLOŠNO Oprema: Prezračevalna/odvajačevalna odprtina Kwedpfsyckwqex Abbot Izvedba: ležeča Leto izdelave: 2023 Opombe: Premer revizijske odprtine: cca 600 mm; vklj. z optično napravo za zaznavanje puščanja, armaturo za kurilno olje, mejno sklopko in lestev z delovnim podestom; Zunanji premer: 2.900 mm Skupna dolžina: 16.050 mm Ogrevanje/hlajenje: na voljo Lokacija: zunanji sklad Minden Tehnična dokumentacija: načrt, različna dokumentacija Tipska ploščica: Prostornina: 100.000 litrov Material v stiku z izdelkom: jeklo Stanje: rabljeno Cilindrična dolžina: 14.960 mm Zadnja uporaba: kurilno olje REZERVOAR Postavitev: pričvrščene sedla OGREVALNI/HLADILNI PLAŠČ Temperiranje notranjosti: potopni grelec OPREMA Revizijska odprtina / pokrov: na rezervoarju

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ogs30-GA-130-40-MZ, kapaciteta rezervoarja: 30.000 l, 1 x 30,000 liter storage tank – used 1 x dispenser unit type GA-130/40-MZ – brand new Tank Description: Manufactured according to DIN 6616/D, above-ground, double-walled, including test certificate. The tank is equipped with two saddle supports, is used, cleaned, and fully overhauled. Fitted with the following equipment: • 1 fill pipe with TW cap (filling cap) and dip tube, • 1 gauge pipe with dipstick and dipstick cap, • 1 vent pipe with vent cap, • 1 brand new overfill prevention device with type approval (AIII), • 1 ladder, as well as 1 spare socket for extraction purposes, • 1 optical leak indicator with type approval and leak detection liquid. The tank is externally newly primed and painted in a RAL color shade. Dimensions: L = approx. 10.00 m + approx. 0.70 m bracket / D = 2.00 m / Weight approx. 6.0 tons. The tank is equipped with a front-mounted, pre-welded bracket onto which a brand new dispenser unit is installed. The dispenser is fully connected to the tank—including an angle check valve and shut-off valve—and is fitted with an approx. 3 m hose and an automatic dispensing nozzle. Dispenser Description: – Brand new – With two dispensing hoses for refueling trucks and cars, non-calibratable, suitable for diesel fuel, switchable, fueling possible from one side only at a time. Delivery rate 1: up to approx. 130 l/min. Delivery rate 2: up to approx. 40 l/min. Approved for above-ground and underground fuel installations, including approx. 2 x 4.0 m dispensing hoses and automatic nozzles ZVA + ZVA 25, as well as a fine filter with washable permanent insert. The dispenser features a 400 V motor with pump and gas separator, including a 3-digit mechanical roller counter for individual refueling quantity display, and a 6-digit totalizer—factory-installed. Optionally available: 1 pcs. hose mast with stainless steel spring The system is fully assembled ready for operation except for the electrical connection of the dispenser. – Ex works, free loaded – General Information: You will receive an invoice with separately itemized VAT. Purchase in accordance with our general terms and conditions. Further fuel systems, storage tanks, heating oil tanks (new and used), as well as rental units also available! Kedpfscybvzjx Abbswt In addition, we purchase existing fuel systems and can professionally empty, clean, dismantle, and transport them with certified specialist qualifications in accordance with the Water Resources Act (WHG).

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: og5, 5,000 liter capacity according to DIN 6616/D, above-ground, double-walled, including inspection certificate. The tank features two saddle feet, a DN 500 manhole with manhole cover, is pre-owned, emptied internally, professionally cleaned, and will be equipped with the following fittings: - 1 filling pipe with TW cap (filling cover) and dip tube - 1 gauging pipe with dipstick and dipstick cap - 1 vent pipe with vent cap - 1 brand-new overfill prevention device with type approval (AIII) Kwsdpocyb E Nefx Abbjt - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection fluid The tank is suitable for the storage of HVO (Hydrotreated Vegetable Oil). The tank will be primed and painted externally. Length = approx. 2.80 m / Diameter = 1.60 m / Weight approx. 1.3 t / ex works, loaded free of charge. We are happy to offer you cost-effective delivery. You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions.

Stanje: rabljeno, prevoženi kilometri: 918.029 km, prva registracija: 04/2016, vrsta prenosa: samodejen, Leto izdelave: 2016, Oprema: ABS, centralno zaklepanje, klimatska naprava, servovolan, spojka prikolice, tempomat, = Additional Options and Equipment = - Air suspension - Sliding roof = Notes = = Additional Options and Equipment = - Lift axle = Notes = Mercedes-Benz Actros 2643 BL Hooklift Truck with MEILLER RK 2065 Body Chassis Equipment: • Emission standard: EURO 6 • Automatic transmission • Hill start assist • Lane departure warning system • Rear hydraulic connection for trailer • Duomatic coupling Kwjdpfx Aswmn Shobbjt • Air suspension front axle • Leaf spring suspension rear axle • Disc brakes • Reinforced engine brake • Multifunction steering wheel • Central locking • Electric windows and mirrors • Bluetooth hands-free system • CD radio • Telephone • Navigation system • Cruise control • Single bunk • Roof hatch • Rear window • Central lubrication system • Drawbar coupling (pintle hook) • Gross vehicle weight: 26,000 kg; technically possible up to 29,500 kg! • Unladen weight: 11,370 kg • Payload: 18,130 kg! • Tyres: 315/70 R22.5 on steel rims Bodywork: • MEILLER hooklift system type RK2065 - TÜV (general inspection), main inspection, and safety inspection can be provided new upon request for an additional charge! - Vehicle purchased in Germany, not a re-import! Errors and prior sale excepted! = Further Information = Number of sleeping berths: 1 Damage: none

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Renishaw Model: Equator 500 Year of Manufacture: 2021 Description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D gauging and inspection system designed for serial and process control in manufacturing. Unlike a conventional coordinate measuring machine (CMM), the Equator 500 is a comparative measuring system engineered for rapid and highly repeatable measurements directly on the shop floor. It is ideal for series production, in-process checking, and automated inspection routines. The device is exceptionally suited for checking dimensional, form, and positional tolerances of workpieces, and can provide feedback to CNC machines. The software launches without issue, and the system status is indicated as 'Started OK' (see photos). Features & Applications: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability within the micron range - Real-time temperature compensation - Designed for shopfloor environments - Automation-capable (e.g., robotic loading) - Ideal for batch, random sample, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / Supplier industry - Mechanical and tool engineering Technical Data (manufacturer's specifications / approx. values): Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: - X / Y: approx. Ø 500 mm - Z: approx. 150 mm Measurement principle: - Comparative coordinate measurement - Temperature-compensated measurement Accuracy: - Very high repeatability - Measurement accuracy in the micron range (depending on application and strategy) Control & Software: - Controller type: Equator 500 - Software version: 2.5.21.1 - RRTLOS version: 5.1.12 - Operated via PC-based Renishaw software Electrical Data: - Power supply: 230 V AC Kwjdoybbqxspfx Abbst - Frequency: 50 / 60 Hz - Power consumption: approx. 1 kW Dimensions (approx.): - Overall height: approx. 1,900 mm - Footprint / Diameter: approx. 1,200 mm - Weight (approx.): 130 kg Condition: used Scope of delivery (see images): - Renishaw Equator™ 500 measurement system - Controller / Industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as pictured (Subject to change and errors in technical data; specifications are subject to confirmation!) Further questions can be answered by phone.

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling Ksdpsu D Amgsfx Abbowt - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, As-new system for the production of honeycomb cardboard from corrugated board. Original price €600,000.00 Kodpfotqpd Hjx Abbjwt

Stanje: dober (rabljeno), Primerno npr. za stroje znamk Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom itd. Merilni sistem z digitalnim prikazom in udobnim nastavljanjem preko ročnega kolesa Merilna dolžina 3600 mm nameščeno na valjčni stezi s plastičnimi valji širina površine cca 290 mm Kedoxy Hb Sspfx Abbjwt idealno za namestitev na obstoječo žago rabljeno, v dobrem stanju

Stanje: novo, Na zalogi v različnih izvedbah! Primerno npr. za stroje proizvajalcev Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom itd. Za namestitev na krožne žage za aluminij, odlično primerno za dvojnogle žage in avtomatske žagalne linije Moč 2,2 ali 3,0 kW, z daljinskim zagonom ali brez Rezervoar 160 litrov, odstranljiv 2 izsesovalna priključka Kwedpfjwczfajx Abbet Premično, z dvema zaklepno kolesoma Cev, priključki in reduktorji na voljo po meri vaših potreb

Stanje: rabljeno, Stüer Conveyor System Roller Conveyors 15890-620-600 RA2457 Further Information Manufacturer: Stüer Type: Roller Conveyor Condition: Good (used) Conveyor length (NL): 15,890 mm, 3 sections Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Roller width (RB): 540 mm Frame height: 140 mm Kwodpfox U Hbqsx Abbjt Height including motor: 240 mm Roller pitch: 75 mm Drive type: head drive Conveyed goods weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available: - Frequency inverter for stepless speed control - Supports - Side guides Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individualized, expert advice, please feel free to contact us. Just call or email us. We are happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Stüer Conveyor System Roller Conveyors 16950-620-600 Kwjdpfx Abox U Hbkjbot RA2456 Further Information Manufacturer: Stüer Type: Roller Conveyor Condition: Good (used) Conveyor length (NL): 16,950 mm, 6 elements between 1,700 and 4,200 mm Roller width (RB): 600 mm Nominal/overall width (NB): 620 mm Roller width (RB): 540 mm Frame height: 140 mm Total height including motor: 240 mm Roller pitch: 75 mm Drive type: Head Conveyable goods weight: up to 30 kg recommended Electrical Data: 3x 300-500 V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available: - Frequency inverter for stepless speed control - Supports - Side guides Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, please feel free to contact us. Contact us conveniently by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: novo, Leto izdelave: 2026, ogrevalna zmogljivost: 49 kW (66,62 KM), premer priključka za dimnik: 180 mm, vhodna napetost: 380 V, Size: 2/S Nominal heat output: 49 kW -- Compliant with BImSchV Stage 2 and CE -- Combustion chamber fully lined with fireclay For rooms up to: 1,450 m³ (according to DIN) Fuel type: firewood, chipboard, wood chips, briquetted wood chips Kedpfodlhafsx Abbjwt Fuel consumption: 15 - 25 kg/h Blower air flow rate, free-blowing: 4,000 m³/h Discharge opening: Ø 450 mm Flue connection: Ø 180 mm Weight: 1,025 kg PLC control cabinet: 380 Volt

Stanje: novo, Leto izdelave: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE -- Combustion chamber fully lined with fireclay Suitable for rooms: 4,800 m³ (according to DIN) Fuel: Firewood, chipboard, wood chips, briquetted wood shavings Fuel consumption: 40 - 50 kg/h Fan air output, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 2,150 kg Kwodpfx Abodlhdbobet PLC control cabinet: 380 Volt

Stanje: novo, Leto izdelave: 2026, Construction size: Prestige SE Nominal heat output: 25 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with fireclay Ksdpfxedlhcys Abbowt For room volumes: 350 – 600 m³ (according to DIN) Fuel: Firewood, wood chips, wood briquettes Fuel consumption: 8 – 10 kg/h Blower air output, free-flow: 1,450 m³/h Outlet opening: Ø 300 mm Flue pipe connection: Ø 150 mm, with flue gas fan Weight: 400 kg PLC control cabinet: 220 Volt

Stanje: novo, Leto izdelave: 2026, Heating output / nominal heat output: 21 kW For spaces of approx. 300 to 500 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue pipe: Ø 180 mm Ksdpjhvibzofx Abbowt Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Filling opening dimensions (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2% Energy efficiency class: A+ The EWI-A 15G room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the emission limits of the 1st BImSchV (Federal Immission Control Ordinance).