Vogel Schemmann nakup rabljenega (208)

Stanje: rabljeno, največja dovoljena obremenitev: 29.370 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2014, dolžina tovornega prostora: 13.600 mm, skupna širina: 2.600 mm, skupna višina: 3.750 mm, Oprema: ABS, * Schmitz SKO 24 FP 60 Cool – Steering and lift axle – VIN: WSM000002010325 * Air suspension – SAF axles – Disc brakes – Tyres: 385/65 R 22.5 * Loading platform length: 13,500 mm – Total length: 14,000 mm * Loading platform width: 2,450 mm – Overall width: 2,600 mm * Internal height: approx. XXXX mm – Overall height: 3,750 mm * Permissible gross weight: 39,000 kg * Unladen weight: 9,630 kg – Payload: 29,370 kg * German vehicle – German registration documents – One-owner vehicle * Viewing by appointment only * Contact person: Mr. Andreas Vogel * The information provided online constitutes non-binding descriptions. Iedpfx Asxglc Uoh Aetr * They do not represent guaranteed properties. * The seller assumes no liability for typographical errors or data transmission mistakes. * Subject to change, errors, and prior sale.

Stanje: rabljeno, Leto izdelave: 1977, Drilling capacity in steel (diameter): 75 mm Arm reach: 1,700 mm Workpiece height - max.: 370 - 1,700 mm Total power requirement: 12 kW Machine weight approx.: 7,000 kg Space requirements approx.: m Manufacturer: CSEPEL (Hungary) Radial drilling machine Model: RFh 75 / 2 000 Year of construction: 1977 61158 _____ Drilling capacity in steel / cast iron: 75 / 90 mm Tapping capacity in steel / cast iron: 60 / 70 mm Maximum arm reach approx.: 1,700 mm Maximum workpiece height: 370 to 1,700 mm Table clamping surface: 1,100 x 2,300 mm Intermediary table approx.: 600 x 1,200 x 300 mm Table height above floor approx.: 600 mm Ijdst Hw Uvepfx Ah Astr Tool holder: MT 5 21 spindle speeds: 19 – 1,900 rpm 12 feed rates: 0.047 – 2 mm/rev Quill travel: 380 mm Vertical adjustment of arm: 950 mm Cross travel of drilling carriage: 1,500 mm Spindle drive approx.: 10 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Dimensions approx.: 3,600 x 1,400 x 3,400 mm (height) Accessories / Special equipment: • Pre-selector switch for hydraulic speed adjustment • Mechanical feed pre-selection • Drilling with or without feed, or with manual fine feed • Drill carriage manually adjustable, vertical arm adjustment via electric motor, feed length/drilling depth set via cams on quill vernier with automatic depth stop and quill return • Electro-mechanical clamping of arm and drilling head via push button • Coolant system integrated in sub-table • VOGEL central lubrication, intermediary table, etc. Condition: satisfactory to good – demonstration under power possible, stable machine with high drilling capacity Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 2017, Stanje: kot nova (razstavni stroj), Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made of steel, welded in one piece, stress-relieved, and machined • Main machine assemblies consist of ribbed welded construction, optimized for an ideal stiffness-to-weight ratio as well as vibration damping and high acceleration • Each machine design is tested and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for convenient loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip for optimum chip removal on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X- and Y-axes • Precision ball screw drive on Z-axis • Precision planetary gearboxes • Enclosed cable carrier chains • High-quality shielded cable carrier lines • X-axis working range 3,050 mm Itedjflpriopfx Ah Ajr • Y-axis working range 1,550 mm • Z-clearance 280 mm • Z-travel 480 mm • Maximum traverse speed 80 m/min • Network connection via Ethernet • Remote maintenance via Internet • Total weight approx. 4,000 kg CNC Control • FlexiCAM ACS Control System Pro • Powerful industrial CNC control "Made in Germany" • DIN-ISO 66025 G-code compatible • Industrial PC with 17" touchscreen monitor as HMI • User-friendly machine control panel • Rotary switches for feedrate and spindle speed • Handheld pendant for setup mode with handwheel, axis & resolution selection, emergency stop button • Windows keyboard and mouse • Front USB port • Ethernet port (RJ45) • Includes remote maintenance via Internet • Control and operator panel integrated in control cabinet Drive Technology • Digital servo drives with AC servo motors • High-resolution absolute encoders (17-bit) • EtherCAT fieldbus Spindle with Automatic Tool Changer • Power consumption 10 kW (S1) / 12 kW (S6) • Speed 2,000 - 24,000 rpm, infinitely programmable • Ceramic bearings • Cooling via integrated electric fan • HSK-63F tool holder • Max. 26 mm shank or tool diameter • Temperature monitoring • Safety check for tool holder in spindle • Compressed air monitoring Extraction Device for Automatic Tool Change • Hose connection 120 mm diameter • Manual height adjustment • Pneumatic up/down for tool change Tool Changer Magazine • Linear tool changer mounted outside the working area at the rear of the machine • Prepared for up to 12 tool positions • HSK-63F / ER40 tool holders included (4x) Precision Tool Length Sensor 6-zone High-pressure Vacuum Table • Phenolic resin laminated board (25 mm thickness) • Zones individually switchable automatically via program or control panel High-pressure vacuum pump as per customer requirements 4x Pneumatic Stops Automatic Centralized Lubrication (Grease) CE Package Delivery, commissioning & training as agreed

Stanje: zelo dobro (rabljeno), Control: Heidenhain TNC 426 Dimensions Required space (WxDxH): 1,920 x 1,850 x 2,400 mm Weight: approx. 2,400 kg Itjdpfxotp S R He Ah Asr Working Area Travel (longitudinal) X axis: 500 mm Travel (cross) Y axis: 255 mm Quill stroke (controlled) Z axis: 147 mm Quill stroke (manual) Z axis: 160 mm Machine head travel W axis: 500 mm Feed Rates (Speeds): Rapid traverse - X and Y axes: 1–11,000 mm/min - Z axis: 1–6,000 mm/min - W axis: 1–3,600 mm/min Feed forces: - X and Y axes: 6,500 N - Z axis: 8,000 N Rapid Traverses: - X and Y axes: 11 mm/min - Z axis: 6 mm/min Position Detection System Direct measuring system via linear scale: X / Y / Z axes Resolution: Indirect measuring system via rotary encoder - Z axis Resolution in X, Y, Z, and W axes: 0.001 mm Accuracy Positioning tolerance P, axes X / Y: 0.005 mm Repeatability Ps, axes X / Y: 0.003 mm Z / W: 0.005 mm Table Clamping area (lxw): 885 x 320 mm Working area T-slots: - Number: 5 - Width: 12-H8 mm - Spacing: 50 mm Permissible table load: 250 kg Table height from floor: 1,040 mm Distance spindle nose to table (min-max): 0–120–620 mm Horizontal outreach: 300 mm Work Spindle Tool quick-change system: SF 32 Tool change: hydraulic via push buttons - Repeatability: 0.002 mm - Tool change time (manual): approx. 5 sec Speed range (steplessly adjustable): 50–9,000 rpm Drive power: 7.6 kW Max. torque: 65 Nm Machining Capacity Drilling capacity: ø 25 mm Tapping: M 20 Enclosure: Partial enclosure with sliding doors Cooling/lubrication: - Coolant reservoir external, capacity: 100 l - Pump delivery rate: 75 l/min Central lubrication system: Vogel

Stanje: rabljeno, Leto izdelave: 1995, x-travel 700 mm y-travel 315 mm z-travel 495 mm Spindle speed 50 – 9,200 rpm Spindle mount ISO SK 30 DIN 69871 A Quill stroke 178 mm Table: 1230 x 410 mm Max. workpiece weight 250 kg T-slots 7 x 12-H8 Feed rate X+Y 9,000 / Z 4,000 mm/min Resolution X, Y and Z axes 0.001 mm Spindle/table distance 165 / 660 mm Tool magazine positions 32 Max. tool weight 3.0 kg Tool change time approx. 5.0 sec Drilling capacity Ø 30.0 mm Tapping capacity M24 Milling performance 100 cm³/min Coolant capacity 100 l Control unit TNC 415 B Voltage 3x 400 V Total power requirement 16.0 kW Machine weight approx. 3,400 kg Isdpfx Ahsxab Uao Ajtr Dimensions (LxWxH) 2500 x 2500 x 2800 mm Good / well-maintained condition (!!) - Inspected condition - Machine video available - ?v=vISK1iCGZ_g Equipment: - Heavy-duty vertical machining centre * Vertical milling and drilling machine, single-column design * With integrated coordinate table * Height-adjustable machine head with extendable quill - CNC HEIDENHAIN control unit "TNC 415 B", front left * Including separate remote control - Electro-motorised adjustment of all axes (X/Y/Z/W axes) * Rapid traverse in all 4 directions * X+Y axis .. max. 9,000 mm/min * Z axis .. max. 4,000 mm/min * W axis .. max. 4,500 mm/min - Infinitely variable spindle speed .. 50–9,200 rpm - Heavy-duty coordinate table incl. 7x T-slots * Crossways protected by 2x telescopic steel covers * X axis .. dovetail guide * Y axis .. preloaded roller shoes on hardened steel rail * Axis drives via precision ball screws * With preloaded double nuts * And DC servo motors mounted directly on the spindle axis * Both axes equipped with linear scales (direct measuring system) - CNC-controlled machine head (W axis = quill axis) * Drive using DC servo motors / toothed belt and ball screw * Machine head mechanically clamped continuously via disc spring packs * Provides secure and stable connection between head and machine bed * Milling and drilling spindle features maintenance-free quill bearings * Spindle head to DIN 2079 accepts SK 30 tools * Tool changer with 32 positions - Machine base with two drawer cabinets for accessories * Including many tooling inserts - Fully enclosed work area * With wide-opening cabin doors - Coolant system with external reservoir - VOGEL automatic central lubrication * Supplies guides, spindles + drive with oil - Original operating manuals + spare parts lists

Stanje: rabljeno, Single-column eccentric press PELS - RICHTER Type PEKR 125 Machine No. 20684 Year: 1967 Press force: 125 tons Isdpofim Thofx Ah Aotr Throat depth: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height with max. stroke at top: max. 450 mm Clamping shank bore: Ø 50 mm Strokes per minute: 60 spm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Overload protection by fracture plate in ram - Pneumatic clutch-brake combination DESCH - Ram counterbalance cylinder - Manual ram adjustment - Two-hand operation - Cam controller - Central lubrication system Vögele - Stroke counter Required space L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Stanje: rabljeno, Leto izdelave: 2025, First registration: 17.03.2025 2-axle tank vehicle with 28 cbm steel tank Tank: - Tank diameter: 2150 mm - Paint: RAL 9006 silver - Interior with special coating - Welded-in baffle plates - Agitator with hydraulic slide valve - 2x 6.00m aluminium troughs for hose storage - Open venting with collection container - Front fill level indicator with automatic pump shut-off - Suction connection center right/left and rear 150 mm (6") mechanical slide valve - Rear suction swivel arm with mechanical slide valve - 10" pipe angled at the rear from the tank into the tank sump Chassis: - BPW axles 60 km/h - TÜV approval 40 km/h - 10 t axle load - 32 t permitted gross weight - Air suspension - Self-steering trailing axle - Tires: 445/65 R 22.5 - Brake drum: 410/180 mm - Axle spacing: 1810 mm - 4 polyethylene mudguards Lighting: - Truck underrun protection with LED tail lights - 2 LED work lights rear (1028) Vogelsang 6 cbm pump VX-186-260 Vogelsang pump VX-186-260 with Vogelsang injection system and carbide replaceable liners (1028-F) 80 km/h axle KTD 80 km/h axle with ABS for KTD 28, steered axle automatically lockable, incl. ABS/EBS (1273) Container for hand washing Custom fabrication (1028-X) Pneumatic plate slide valve 6" instead of brass slide valve 6" each (1028-E) LED work lights front under hose trough (1028-A) Hydraulic docking funnel top 8" with brass slide valve (1099) Tank color Tank in RAL 9006 Kumm silver Iedpfx Ahsxf Ak Ho Ajtr Location: 54595 Prüm

Stanje: dober (rabljeno), Leto izdelave: 1989, 1 x Automatic Lathe Manufacturer: Traub Model: TD 16 Year of manufacture: 1989 with hydraulic bar feeder LNS Hydrobar Model: 3.16-HS 4.4 Year of manufacture: 1989 Iedpfxsvga A Ts Ah Ajtr Equipment: 6-position turret head Quick-action material clamping Long turning device Central lubrication system by Vogel Accessories: See photos The machine can be inspected under power.

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), Machine Data • Gantry system with a fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine components constructed from ribbed welded assemblies, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is validated and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading by forklift or overhead crane • Ground precision guides with high preload and additional cover band for optimum chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side, synchronized drive on the X-axis (gantry drive) • Rack-and-pinion drive on X and Y axes • Precision ballscrew drives with dual bearing units on Z-axis • Precision planetary gearboxes with low backlash • Enclosed drag chains to protect cables from chips and dust • High-quality shielded drag chain cables provide high reliability against malfunctions and failures • X-axis working range 2,550 mm • Y-axis working range 1,550 mm • Z clearance 200 mm • Z travel 280 mm • Travel speed max. 80 m/min • Network connection via Ethernet • Remote maintenance via Internet • Dimensions approx. 2,960 x 2,460 x 1,930 mm (L x W x H, without safety equipment) • Total weight approx. 3,200 kg CNC Control • FlexiCAM ACS Control System Pro • High-performance industrial CNC control "Made in Germany" • DIN-ISO 66025 G-code compatible • Industrial PC with 17" touchscreen monitor as HMI • User-friendly machine control panel • Rotary switches for feed and spindle speed Iodpshwd Eajfx Ah Aetr • Manual unit for setup operation with handwheel, axis & resolution selection, emergency stop button • Windows keyboard and mouse • Front USB port • Ethernet port (RJ45) • Includes remote maintenance via Internet • Control and operator panel integrated into the control cabinet Drive Technology • Digital Siemens drive concept • Siemens Sinamics V70 servo controllers • Siemens Simotics 1FL6 servo motors • Siemens MOTION-CONNECT cables and connectors Spindle with Automatic Tool Changer • Power consumption 8 kW (S1) / 10 kW (S6) • Speed range 2,000 – 24,000 rpm, continuously programmable • Ceramic bearings • Cooling via integrated electric fan • ISO 30 tool taper • Max. 26 mm shank or tool diameter with ISO30 / ER40 tool holders • Temperature monitoring • Tool taper presence check in spindle • Compressed air monitoring • Compressed air supply required on customer side Extraction Device for Automatic Tool Change • Hose connection 120 mm diameter • Pneumatic up/down for tool change • Extraction device required for CE-compliant system operation Tool Magazine • Linear tool changer • Prepared for 10 tool positions 6-Zone T-slot Hybrid Table / High-Pressure Vacuum Table • Combination of mechanical clamping with the added benefit that a part can also be held with vacuum only • Zones can be manually controlled via ball valves • Grid for use with foam rubber gasketing

Stanje: rabljeno, lastna masa: 5.900 kg, največja dovoljena obremenitev: 28.600 kg, skupna masa: 34.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/1988, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 30 odstotek, barva: modra, Leto izdelave: 1988, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 69589 Hendricks, Goch, Rutemund Tanker * Year of manufacture: 1988 * Air suspension * Lift axle * Rotary lobe pump * Suspension type: Air * Gross vehicle weight: 34,500 kg * Curb weight: 5,900 kg * Payload: 28,600 kg * Permissible total weight: 34,500 kg * Axle manufacturer: BPW * Tire condition (1st axle): 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition (2nd axle): 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition (3rd axle): 30% -- 30% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Stadler TSA 32LD * Vogelsang rotary lobe pump 136-210 * Rear outlet * 2 compartments with baffle walls * 3 manhole covers * Curb weight: 5,900 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Ijdpfjwdq Tijx Ah Aotr Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Ordering of export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Vehicle transfer/transport Ask our qualified staff—we are happy to advise you.

Stanje: rabljeno, Leto izdelave: 2017, Eidam slurry distributor with Vogelsang macerator 6.00 m working width 2 discs per coulter 32 outlets Vogelsang macerator Itodpfev Aqnfjx Ah Asr 3-point linkage Cat 2/3 Lighting and warning panels | Internal no.: 11223711

Stanje: rabljeno, CNC Universal Milling Machine MAHO Type MH 400 E Machine No. 43072 Year of manufacture: 1989 Travel range X: 400 mm Y: 250 mm Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with retention stud type B Spindle speed 80 - 4000 rpm, 18 steps Feed speed 1-1500 mm/min, infinitely variable Rapid traverse (X, Z and Y) 2.5 m/min Quill movement vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - Swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swivelling device for the vertical milling head - Splash guard enclosure for the table with 3 upward-folding doors - Electrical control cabinet mounted on the machine - V24 (RS 232) interface for data transfer - 52,470 operating hours, main switch on Itedpfxjh Ic Ufs Ah Aer - Fixed angle table - Coolant unit with separate pump located under the machine - Central lubrication system Vogel - Operator's manual, electrical schematic Required space (L x W x H) 2250 x 1800 x 1850 mm Weight approx. 1.5 tons In good condition

Stanje: novo, prevoženi kilometri: 250 km, moč: 140 kW (190,35 KM), vrsta goriva: električni, skupna masa: 3.500 kg, velikost pnevmatike: 225/65 R16, konfiguracija osi: 4x2, medosna razdalja: 3.520 mm, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: drugo, emisijski razred: noben, vzmetenje: jeklo, skupna dolžina: 6.000 mm, skupna širina: 2.010 mm, skupna višina: 2.620 mm, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 3.540 mm, širina tovornega prostora: 1.740 mm, višina nakladalnega prostora: 1.900 mm, obratovalna teža: 225 kg, dvižna višina: 2.623 mm, Oprema: ABS, kabina, klimatska naprava, nadzor oprijema, nizka raven hrupa, računalnik na krovu, tempomat, Financing / leasing available upon successful credit assessment! Contact us! Subject to errors and prior sale. Itjdpfx Ahsxa S Iwe Aer MY2024 Electric Panel Van, Wheelbase 3520L mm, Comfort Plus Package, Driving Assistant Package, ASC Wooden Floor and Lining, ASC Lashing Rail 3520 & L, My Iveco Infotainment 10” Navigation, USB Driver / Passenger, Integrated Alexa Voice Assistant, Lane Centering Plus (LC), Blind Spot Assist both sides + Door Assist + Exit Warning (BSW), Intelligent Traffic Jam Assist (TJA), Rear Cross-Traffic Alert & Brake (RCTA), Cargo Area Lighting 3x LED, Driver’s Seat Storage Box & USB, Leather Steering Wheel, Luxury Driver’s Seat, heated, hydraulic, Battery Charged, German Documentation, 4x2, Additional Speed Limiter, 12 V 13-pin Trailer Socket, AC Charging 22 kW, Fog Lights, DC Charging 80 kW, Rear View Camera with Dynamic Guidelines, Rear Doors Opening Angle 260°, ASC Wheel Arch Covering, Operating and Maintenance Instructions (electronic), Mirrors, Body Width 2200 mm, Cat IV, Front Passenger Double Bench with Multifunction Storage, Switch for Superstructure Lighting, Grab Handle on A-Pillar, Tow Bar with Ball Head, Number of Drive Batteries: 2 (74 kWh), Comfort Headrests, Overhead Shelf above Windscreen, External Loading Lights above Rear Doors, Seat Heating, Remote Control with Additional Key, Extended Partition Wall to Cargo Area, Adaptive Cruise Control (ACC) Stop & Go.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 308-600-1716, globina vrtanja: 600 mm, hitrost vretena (min.): 1.423 obr/min, premer vrtanja: 65 mm, višina središča: 299 mm, TECHNICAL DETAILS Boring Unit Drilling System: BTA + Ejector Speed Steps: 8 or 16 with gear change Feed Range: 0 – 500 mm/min Rapid Traverse, forward/backward: 5,000 mm/min Spindle Mount: DIN 55022, Size 6 Main Drive Three-phase Motor: 37 kW, 1,500 rpm Frequency Control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo Motor: 10 Nm, 3,000 rpm Ball Screw: MH 50 × 10 × 14 Coolant System Total Power Requirement: 73 kW Coolant Pump: MSDA 40-R38, SMDA 80-R46 Magnetic Filter Candles: MFK 400 R Liquid Cooler: DKL 7 Ijdpfx Ahswx E N Is Astr Magnetic Tube Filter: 54 572 71 104 Immersion Pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine Weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with sliding drill bushing Clamping fixture with drill bushing holder Clamping fixture with clamping table Clamping fixture with tailstock center Clamping fixture with centric clamping stock ZS2 (HICO) Force measurement device KIMISIT 0 – 30 Hydraulic power unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Machine base, bridge, and uprights constructed from one-piece welded, stress-relieved, and machined steel • Main machine assemblies made from ribbed welded structures, optimized for best stiffness-to-weight ratio, vibration dampening, and high acceleration • Every machine design is validated and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table allows convenient loading/unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover strip for optimal chip removal on all axes • Brushless digital AC servo motors and drives on all axes • Double-sided synchronized drive on X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double-end bearing units on Z axis • Precision planetary gears with minimal backlash • Enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded drag chain cables ensure high interference protection and operational reliability • X travel: 3,050 mm • Y travel: 1,550 mm • Z clearance: 200 mm • Z travel: 280 mm • Max. traverse speed: 80 m/min • Network connection via Ethernet • Remote maintenance via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Total weight approx. 3,500 kg CNC Control • Siemens Sinumerik 808D Advanced • LCD color display • Mechanical keys, IP65 protection • 62-key operator panel • Technology-specific keyboard layout • Operator panel with 39 keys and 30 LEDs • LED tool number display • Rotary switches for feed and spindle speed • Handheld operator box with handwheel, axis & resolution selection, emergency stop • Front USB port (IP65) • Ethernet port (RJ45) • Comprehensive training and offline programming tools available Drive Technology • Digital Siemens drive concept • Siemens Sinamics V70 servo controllers • Siemens Simotics 1FL6 servo motors • Siemens MOTION-CONNECT cables and connectors Spindle with Automatic Tool Changer • Power consumption 8 kW (S1) / 10 kW (S6) • Speed 2,000 – 24,000 rpm • Ceramic bearings • Cooling by integrated electric fan • ISO 30 tool taper • Max. 26 mm shaft or tool diameter with ISO30 / ER40 tool holders • Temperature monitoring • Safety query for tool taper in spindle • Compressed air monitoring Extraction Device for Automatic Tool Change • Hose connection 120 mm diameter • Manual height adjustment • Pneumatically up/down for tool change Tool Magazine • Linear tool changer, mounted outside work area at rear of machine • Max. 12 tool positions • ISO30 / ER32 tool holders included (4x) 6-Zone High-Pressure Vacuum Table • Hard paper tabletop (25 mm thick) • Zones manually controlled via ball valves High-Pressure Vacuum Pump per Customer Specification Precision Tool Length Sensor CE Package Iodpfx Aeflpmdoh Astr Delivery, Commissioning & Training as agreed

Leto izdelave: 2025, Stanje: novo, SPECIAL OFFER! CLEARANCE SALE! Exhibition Pellet Machine PLT-300. This machine is designed for the production of fuel pellets, animal feed, as well as for the pelletizing of waste from sugar production, peat, cereal husks, bird droppings, plastics, and many other types of agricultural waste. Innovative conical rollers prevent slipping on the die, significantly increasing the efficiency of the pellet mill and reducing wear on both the rollers and the die. Slow-running motor with 22 kW, 400 V, and high torque. Throughput: 350 kg/h (depending on the type and quality of raw material). Itsdpfjwhw Alox Ah Aor European-made product, warranty, spare parts available. Net purchase price with VAT ID. Collection in person or delivery by arrangement. It is possible to inspect and test the machine before purchase. I look forward to your inquiries.

Stanje: rabljeno, prevoženi kilometri: 605.000 km, moč: 330 kW (448,67 KM), prva registracija: 07/2016, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2016, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, * Mercedes Benz 1845 LSnRL Actros BIG SPACE – Air conditioning – Retarder – Good condition * Chassis Number: WDB96340610079482 – One owner – German vehicle – Itodpfx Ahsvul H Ho Ajr * Diesel – Engine displacement: 12,809 cm³ – 330 kW / 449 HP – Euro 6 – Green emissions sticker – * Tire sizes: Front axle: 355/50 R 22.5, Rear axle: 295/60 R 22.5 * Electric air conditioning & parking air conditioning – * Pick-up price – as is, take it away – Without TÜV (roadworthiness test) – Without license plates – * Vehicle available immediately and ready for collection – * Please schedule an appointment for viewing – * Contact: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not represent guaranteed features. * The seller is not liable for typing or transmission errors. * Subject to change, error, and prior sale. Special equipment: Front axle load 8.0 t, driver’s airbag, LED ambient lighting, work lights, audio system: CD radio (Bluetooth), bi-xenon headlights, CB radio, 24V/100A electric pre-installation in cab, driver assistance systems: Attention Assist (drowsiness sensor), Brake Assist (Active Brake Assist 3), Lane Keeping Assist, Roll Control Assist, cab: Style-Line interior, front springs 8.0 t, air suspension, notebook holder, 12.7 cm info display with video function, automatic climate control, wide upper comfort bunk, 630 L aluminum fuel tank, cooler / refrigerator, integrated air intake, roof air deflector (adjustable, without base trim), tire pressure monitoring system, spare wheel, side-mounted spare wheel lift, retarder, tail lift switch, circuit breaker, cab seats: SoloStar Concept, external sun visor, parking air conditioning, additional 24V socket in passenger footwell, Fleetboard pre-installation, pre-installation for reversing camera, additional insulation Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 4, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel air tanks, medium air unit, cab: L BigSpace, cab with steel suspension, comfort package, air/air suspension, electric window lifters, tinted windshield, 100A alternator, 12-speed transmission – Type: G 211-12, urea tank (AdBlue): 60 L, rear axle crown wheel 440, body type/chassis, comfort central locking, communication interface, radiator blind, regulated power steering pump, trailing axle lift, 2-stage air compressor, engine 12.8 L – 330 kW R6 diesel (OM 471), engine brake, engine compartment encapsulation, single-tired trailing axle, ramp mirror, residual heat utilization, disc brakes on front and rear axles, cab seats: co-driver functional seat, folding driver’s seat backrest, voltage converter 24V/12V 10A, front splash guard, front axle stabilizer, additional stabilizer (rear axle / trailing axle), left external stowage compartment, 24V cab socket, tachograph / EU control unit, cab door extension, aerodynamically shaped underbody paneling, front underrun protection, toll pre-installation, cranked front axle, regulated water pump, permissible gross weight 18.00 t, additional water heater

Stanje: rabljeno, Frame punch - swing frame punch - flatbed die cutter - platen punch - eccentric press Punch + feeder for use with band knife die cutting tools Flatbed die cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture 1998 Pressing force 25 tons Clearance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame width 510 x depth 440 mm, plate thickness 20 mm Ram area 800 x 670 mm Drop-through hole in the table 490 x 420 mm Ram stroke 45 mm Ram adjustment range 10 mm Installation height = tool height 100 mm Strokes per minute up to 250 strokes/min Motor power 15 kW Power supply 400 Volt, 50 Hz - controlled drive for infinitely variable stroke rate Isdpfxedzqmzs Ah Ajtr - pneumatic clutch-brake combination - ram counterbalance cylinder - automatic central lubrication system VOGEL - heavy-duty base plate with 4 vibration dampers beneath the machine Required space L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for punching cardboard blanks. Ideal for punching non-woven fabrics or similar materials for respiratory masks.

Stanje: novo, Leto izdelave: 2025, višina struženja: 3.000 mm, teža obdelovanca (maks.): 50.000 kg, premer struženja: 4.200 mm, dolžina podajanja os X: 4.700 mm, dolžina podajanja os Z: 2.000 mm, premer čelne plošče: 4.000 mm, hitrost pomika os X: 25 m/min, hitrost podajanja os Z: 15 m/min, premer vrtljive mize: 4.000 mm, največja hitrost vrtenja: 100 obr/min, vrtilni moment: 128.000 Nm, hitrost vretena (min.): 3.000 obr/min, obremenitev mize: 50.000 kg, moč: 100 kW (135,96 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, TECHNICAL DATA: Isdpfjq Ny Dtex Ah Aetr Machining diameter: 4200 mm Maximum workpiece height: 3000 mm Maximum workpiece weight: 50,000 kg Face plate diameter: 4000 mm Face plate speed range: 0–30/0–100 rpm Maximum face plate torque: 128,000 Nm Main drive power: 75/90 kW EQUIPMENT: - 1–2 slide configuration - Full machine enclosure - Chip conveyor - Coolant preparation - C-axis - Fork head - Driven tools / BT50 - Bellows cover - Central lubrication SKF/VOGEL - 12-month warranty - Complete electrical system 230/400V, 50Hz, Made in Germany, CE standard CONTROL SYSTEM: FAGOR or SIEMENS OTHER: Geometry acceptance according to DIN 8609-3

Stanje: novo, Leto izdelave: 2025, TECHNICAL DATA: Processing diameter: 1600 (1800*) mm Max. workpiece height: 1000 (1500*) mm Max. workpiece weight: 6300 kg Face plate diameter: 1400 mm Face plate speed range: 0–200 (0–315*) rpm Max. face plate torque: 25,000 Nm Main drive power: 75 kW EQUIPMENT: - 5-position turret head or tailstock slide - Central lubrication system SKF/VOGEL - Version .300 – two- (three*) stage main gearbox - 12/24 months warranty - Complete electrical equipment 230/400V, 50 Hz, Made in Germany, CE standard OPTIONS: - Capto tool change system - Tool magazine - Machine enclosure - Chip conveyor - Coolant preparation - ... CONTROL SYSTEM: CNC Fagor 8055TC or Siemens 840Dsl OTHER: Ijdpfecx Rv Hsx Ah Aetr Geometry inspection according to DIN8609-2

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, TECHNICAL DATA: Machining diameter: 2000 mm Max. workpiece height: 1200 mm Max. workpiece weight: 8000 kg Chuck diameter: 1800 mm Chuck speed range / 4 automatic steps: 0–210 rpm Max. chuck torque: 31,500 Nm Main drive power: 55 kW Isdpef S Hcyefx Ah Astr EQUIPMENT: - 4-position turret head or tailstock support with 2 Capto clamping units - Central lubrication system SKF/VOGEL - Commissioning including training - 12 months warranty - Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE compliant OPTIONS: - Tool holders - Tool change system (10-position) - Machine enclosure - Chip conveyor - Coolant preparation - Side support - Machine version with tailstock and 2x Capto C6 - ... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens MISCELLANEOUS: CE Declaration of Conformity Geometry acceptance according to DIN8609-2

Stanje: novo, Leto izdelave: 2025, TECHNICAL DATA: Turning diameter: 1600 mm Max. workpiece height: 1000 mm Max. workpiece weight: 6300 kg Faceplate diameter: 1400 mm Faceplate speed range: 0–200 rpm Max. faceplate torque: 25,000 Nm Main drive power: 75 kW EQUIPMENT: - 5-position turret or tailstock Itedpfx Asd I Au Roh Asr - Central lubrication system SKF/VOGEL - Two-speed main gearbox - 12-month warranty - Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE standard OPTIONS: - Capto tool change system - Tool magazine - Full machine enclosure - Chip conveyor - Coolant preparation - Side support - ... CONTROL SYSTEM: CNC Fagor or Siemens MISCELLANEOUS: Geometry acceptance in accordance with DIN 8609-2

Stanje: novo, Leto izdelave: 2025, TECHNICAL DATA: Swing diameter: 3,200 mm Max. workpiece height: 1,600 mm Max. workpiece weight: 16,000 kg Faceplate diameter: 2,800 mm Faceplate speed range: 0–80 rpm Max. faceplate torque: 67,000 Nm Main drive power: 75 kW EQUIPMENT: - 1 or 2 support configurations - Capto quick-change system or triple tool holder - Telescopic covers - Central lubrication SKF/VOGEL - 12-month warranty - Complete electrical equipment 230/400 V, 50 Hz, made in Germany, CE compliant OPTIONS: - Machine enclosure - Chip conveyor - Coolant preparation - Turret head - Driven tools - ... CONTROL: FAGOR or SIEMENS Itjdpfx Ascx Rvyjh Asr MISCELLANEOUS: Geometric acceptance/inspection according to DIN 8609-3

Stanje: novo, Leto izdelave: 2025, CNC control optionally Fagor 8055TC (Siemens/Heidenhain*) Delivery time approx. 7-8 months Including standard accessories: - Complete electrical equipment 24/230/400V, German manufacture (CE standard) - Machine lamp 24 Volt - Coolant system - 4-way tool post incl. cross slide (or 4-way turret*) - 4-jaw faceplate 1250mm - Safety cabin/machine enclosure - Central lubrication system by SKF/Vogel - 1 set of technical documentation, including: -- Operating manual -- Electrical circuit diagram -- Programming manual -- Declaration of conformity (CE) Itsdpfxodag Sve Ah Aor - Machine painting: combination RAL 7035 and RAL 5015 Technical data Workpiece diameter over bed: 1250mm Machining diameter over bed: 1250mm Machining diameter over slide: 900mm Distance between centers: 8000mm Max. workpiece weight: 16,000 kg Spindle nose according to DIN 55026: Size 15 Spindle bore: 128mm Spindle internal taper (metric): 140 Main motor power: 37/55 kW Spindle speed range: 5-500 rpm Speed ranges (automatic-hydraulic), incl. stepless regulation within gears: 4 Max. spindle torque: 10,500 Nm Machine dimensions: Total length: 11,200 mm Width: 2,400 mm Height: 2,000 mm Machine weight: 17,750 kg * Option

Stanje: novo, Leto izdelave: 2025, TECHNICAL DATA: Machining diameter: 2,500 mm Max. workpiece height: 1,600 mm Max. workpiece weight: 16,000 kg Chuck diameter: 2,240 mm Chuck speed range: 0–100 rpm Max. chuck torque: 50,000 Nm Main drive power: 75 kW EQUIPMENT: - 1–2 slide versions - Capto quick-change system / triple tool holder - Telescopic covers - Centralized lubrication system SKF/VOGEL - 12-month warranty - Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE-compliant OPTIONS: - Machine enclosure - Chip conveyor Itjdpfscxlylox Ah Aor - Coolant preparation - Turret head - Driven tools - ... CONTROL: FAGOR or SIEMENS Delivery time: approx. 7–9 months OTHER: Geometry acceptance according to DIN 8609