Vlečni Drog nakup rabljenega (2.400)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
Hidrogarne80T C-Ständer-Presse CF-80VR
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.630 mm, skupna širina: 1.500 mm, skupna dolžina: 1.210 mm, stiskalna sila: 80 t, širina mize: 800 mm, dolžina mize: 550 mm, skupna masa: 2.980 kg, hitrost vzvratne vožnje: 230 mm/s, širina plošče bata: 650 mm, dolžina plošče bata: 400 mm, delovna višina: 850 mm, hod: 450 mm, pritisk: 290 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Motorno hidravlične C-okvirne stiskalnice serije CF/VR so na voljo v treh različnih močeh od 80 do 150 ton.
Posebej so zasnovane za delo, ki vključuje globoko vlečenje, štancanje, izsekavanje, oblikovanje ipd., namenjeno srednjim in velikim serijam.
Najnovejša generacija hidravličnih stiskalnic serije CF/VR ima zdaj širok spekter uporabe, vključno z možnostjo vgradnje teh strojev v avtomatske proizvodne linije.
STANDARDNA OPREMA:
MODEL CF-80/VR
Moč (t) 80
Moč motorja (kw) 7,5
Globina grla (mm) 340
Delovna hitrost (mm/s) 9,7 - 5
Približevalna hitrost (mm/s) 162
Povratna hitrost (mm/s) 230
Maks. pritisk (bar) 290
Hod bata (mm) 450
Nsdpfxjwpg Uae Adtjdd
Spodnja miza (mm) 800×550
Zgornja miza (mm) 650×400
Maks. vertikalna svetloba (mm) 650
Delovna višina (mm) 850
Skupna širina (spredaj) (mm) 1210
Skupna dolžina (bočno) (mm) 1500
Skupna višina (mm) 2630
Teža (kg) 2980
ELEKTRIČNA INSTALACIJA IN VARNOST
Standardna oprema vključuje Siemens SIMATIC S7 1200 PLC ter nastavljivo upravljalno ploščo z 7'' zaslonom na dotik, model MPT-700. Omogoča programiranje moči, hoda bata in hitrosti. Shrani do 300 programov.
Električne in hidravlične manevre so redundantne in samonadzorovane. Vgrajen je dodatni varnostni blok ter samonadzorni elementi za delovanje in varnost. Zajeta sta preverjanje in certifikacija pravilnega delovanja ter varnostne razdalje svetlobnih zaves.
Upravljanje poteka z električnim pedalom na nizki napetosti.
Za varnost so v delovnem območju na sprednji strani nameščene varnostne svetlobne zavese tipa 4 PLe, dostopna bočna zaščita s polikarbonatnimi okni ter notranja LED osvetlitev.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneCR-150/SERVO
Klic
Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.910 mm, skupna širina: 900 mm, skupna dolžina: 650 mm, stiskalna sila: 150 t, širina mize: 900 mm, dolžina mize: 650 mm, obratovalna hitrost: 220 mm/s, skupna masa: 6.000 kg, hitrost vzvratne vožnje: 220 mm/s, širina plošče bata: 750 mm, dolžina plošče bata: 500 mm, delovna višina: 950 mm, hod: 400 mm, pritisk: 290 letvica, hitrost stiskanja: 8 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, TECHNICAL DATA:
Force: 150 t
Motor power: 11 kW
Cylinder stroke: 400 mm
Variable working speed: 8 - 0 mm/sec
Approach speed: 220 mm/sec
Return speed: 220 mm/sec
Working pressure: 290 bar
Nsdpjwkvktsfx Adtsdd
Table size: 900 x 650 mm
Ram size: 750 x 500 mm
Clear height: 650 mm
Working height: 950 mm
Width: 1,360 mm
Depth: 2,135 mm
Height: 2,910 mm
Weight: 6,000 kg
We have developed motorized screw pumps of the CR/SERVO series with low energy consumption and a 60% energy saving. They have been specially designed for high production performance tasks in stamping, drawing and punching. The latest generation CR-SERVO presses have evolved to offer multiple application options, such as the ability to integrate these machines into automated production lines.
FRAME:
The steel frames of this series are made from an electro-welded structure, manufactured exclusively from S355JR steel. The frames are stabilized until the end of the welding process and then machined to guarantee perfect parallelism and precision. They are designed and calculated with finite element analysis software, ensuring our high standards in precision and quality.
The presses feature upper and lower bolster/ram plates made from C45E steel, equipped with T-slots according to DIN 650. The upper plate ensures perfect parallelism through two lateral 50 mm diameter guides with maintenance-free bushings.
HYDRAULICS:
Single-acting main cylinder with guide sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. For rapid approach and return, two double-acting lateral cylinders are installed, featuring a chrome-plated rod and guide for fast jogging and retraction.
REXROTH hydraulic group with servomotor and pre-fill devices, including pre-fill valves for approach and return, as well as a constant flow pump for steady output and speed via the servo motor system, return lock, pressure relief valve, spindle shut-off valve, and air cooling.
ELECTRICS:
Includes as standard a SIEMENS PLC mod. SIMATRIC S7 1200 and an adjustable 7" panel (MPT-700). Allows programming of power, stroke, and speeds, with a memory capacity for 300 programs.
The electrical and hydraulic valves are redundant and automatically controlled. An additional safety block and auto-monitoring devices for the valves and safety system are included. Functionality and safety distances for the light curtains are checked and certified.
Operation is carried out via a low-voltage electric foot pedal.
To ensure safety, the machine features front electrical safety interlocks (type 4 PLe), two accessible lateral safety guards with safety valve, and internal LED lighting in the work area.
Complies with all major safety and health requirements as per the CE standard.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneCF-400E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 400 t, širina mize: 2.000 mm, dolžina mize: 1.000 mm, obratovalna hitrost: 106 mm/s, hitrost vzvratne vožnje: 125 mm/s, hod: 750 mm, hitrost stiskanja: 12 mm/s, Oprema: varnostna svetlobna zapora, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS
We offer here a new or reconstructed version of this press.
The press will be available for sale from the 2nd or 3rd quarter of 2026, as the project has been extended.
The CF-400E/NC hydraulic press is part of the CF/NC series and has been specifically developed for the straightening of railway rails.
Equipped with an upper and lower table made of machined C45E steel featuring DIN-650 T-slots.
It utilizes an optimized hydraulic system operating at less than 255 bar, ensuring long service life and reliable performance.
Complies with all essential CE safety and health regulations.
Njdpfx Aowkv A Njdtedd
TECHNICAL DATA
Pressing force: 400 t
Motor power: 22 kW
Variable working speed: 4–12 mm/s
Approach speed: 106 mm/s
Return speed: 125 mm/s
Maximum pressure: 255 bar
Stroke: 750 mm
Lower table: 2,000 x 1,000 mm
Ram plate: 2,000 x 1,000 mm
Maximum vertical clearance: 1,000 mm
Working height: 960 mm
Overall height: 3,560 + 600 mm
Weight: 39,500 kg
FRAME AND TABLE:
• The C-frame (gooseneck) structure is electro-welded, made exclusively from S355JR steel.
• After welding, it is stabilized and machined to ensure perfect parallelism and precision.
• Designed and calculated using finite element software.
• The upper table ensures perfect alignment with four side-mounted cylindrical guides (80 mm diameter) equipped with maintenance-free bi-metallic bushings.
CYLINDERS AND HYDRAULIC SYSTEM:
• Main single-acting cylinder with jacketed housing, chromed piston, and maintenance-free, wear-resistant guides.
• Two lateral double-acting cylinders with chromed pistons and wear-resistant guides for rapid approach and return speeds.
• Includes two independent hydraulic safety blocks.
• Motorized hydraulic unit with pre-fill valve for both advance and return. Pump with constant power and variable flow rate.
• Equipped with a directional control valve, pressure relief valve, decompression valve, and an air-oil cooling system.
• Glycerin pressure gauge with tonnage indicator.
ELECTRICAL INSTALLATION AND SAFETY:
• Includes SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen HMI, model KTP-700 COMFORT, housed in the control cabinet. Allows programming of semi-automatic and automatic operation modes, power, stroke, and dwell time. Storage for up to 300 recipes, each capable of saving all preset values.
• Electrical and hydraulic controls are redundant and self-checking. Includes an additional safety block and self-monitoring systems for operations and safety. Inclusive of verification and certification of correct function and safety distance for light curtains.
• Operation is via a low-voltage electric foot pedal.
• For safety, category IV laser and working area protection with light curtains are integrated.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneCD-50NC
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.020 mm, skupna širina: 960 mm, skupna dolžina: 1.350 mm, stiskalna sila: 50 t, širina mize: 450 mm, dolžina mize: 450 mm, obratovalna hitrost: 30 mm/s, hitrost vzvratne vožnje: 42 mm/s, hitrost stiskanja: 6 mm/s, This press has been specifically developed for bending, forming, shaping, punching, assembling, and deep drawing operations. Variants are available with pressing forces ranging from 50 to 150 tons.
Model: CD-50/NC
Pressing Force: 50 T
Motor Power: 4 kW
Ram Stroke: 250 mm
Working Speed: 6.3 mm/sec
Approach Speed: 30 mm/sec
Return Speed: 42 mm/sec
Maximum Pressure: 320 bar
Piston Stroke: 250 mm
Lower Table: 450×450 mm
Ram with anti-rotation guide
Open Height: 400 mm
Weight: 1,480 kg
CYLINDER AND HYDRAULICS:
Ndodpfx Aewlgcisdtod
The double-acting cylinder is equipped with a guide bush, a chrome-plated piston rod, and wear-free guide components. To prevent wear on the piston rod, the presses feature a removable and replaceable pressure plate, which can also be replaced by alternative tooling. The press is fitted with an anti-rotation system mounted to the cylinder by means of a clamp and guide rod.
The hydraulic unit is a dual-speed system with automatic high-speed shut-off. A cylinder decompression valve is also supplied as standard.
ELECTRICS AND SAFETY:
Standard equipment includes a Siemens SIMATIC S7 1200 safety PLC and a 4-inch MTP-400 touchscreen, conveniently located above the electric foot pedal. This allows programming of operation modes (semi-automatic/automatic), output, stroke, and upper cylinder dwell time. The PLC memory supports up to 99 program recipes, each capable of storing all relevant process parameters.
The control cabinet is equipped with a selector switch for manual or automatic operation and a key switch for maintenance access.
Both the electrical and hydraulic controls are implemented redundantly and are self-monitoring. The hydraulic safety block features valves with electric position monitoring to meet essential safety requirements.
Operation is via a Category IV two-hand safety control system.
Fixed side guards with a 650 mm front opening ensure operator safety.
An optional hydraulic cushion or hydraulic ejector can be installed.
All presses are supplied with an operating manual. CD-Series presses comply fully with all essential safety requirements and criteria in accordance with current CE regulations.
mali oglas
Bellpuig
1.228 km
Ravnalna stiskalnica
HidrogarneTL400/6000E
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.250 mm, skupna širina: 3.650 mm, skupna dolžina: 6.000 mm, stiskalna sila: 400 t, širina mize: 2.520 mm, dolžina mize: 6.000 mm, obratovalna hitrost: 3 mm/s, skupna masa: 28.500 kg, hitrost vzvratne vožnje: 18 mm/s, pritisk: 319 letvica, moč: 11 kW (14,96 KM), HYDRAULIC PRESS FOR STRAIGHTENING LARGE ELECTRO-WELDED STRUCTURES AND OXY-FUEL CUT PLATES
The TL-400-6000E hydraulic press is part of the T/NC series and has been custom-designed for straightening operations on large electro-welded structures and oxy-fuel cut steel plates.
Like all of our T/NC series hydraulic presses, its design facilitates the loading and unloading of large parts, plates, or structures. It enables access to various pressing points without needing to move the workpiece, thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge.
It uses an optimized hydraulic system with a pressure below 319 Bar, ensuring prolonged durability and reliable performance.
STRUCTURE AND WORKTABLES
- Consists of an electro-welded frame made exclusively from S355JR steel.
- Structure is stabilized and machined after the welding process to ensure perfect parallelism and precision.
- Designed and calculated using finite element analysis software.
- Longitudinal movement of the bridge is achieved by frequency inverter and toothed belt.
- Lateral movement of the press head is motorized and controlled via frequency inverter.
Complies with all essential health and safety requirements in accordance with CE regulations.
Nodpfx Adjwpgmvetjdd
CYLINDER AND HYDRAULIC UNIT
- Double-acting cylinder with honed barrel, chrome-plated piston rod, and maintenance-free anti-wear guides.
- Equipped with a removable and interchangeable presser foot to prevent piston rod damage, with end-machining to adapt different tools.
- Includes standard cylinder anti-rotation device and graduated front panel with limit switches to control cylinder stroke.
- Motorized hydraulic power unit with two speeds and automatic high-speed disengagement.
- Cylinder pressure relief valve included.
- Pressure regulator.
- Glycerine-filled tonnage manometer.
ELECTRICAL INSTALLATION AND SAFETY
- Electric panel features a selector to choose between manual or semi-automatic operating modes.
- Also includes a selector for fast approach or slow working speeds.
- Operation via a low-voltage pendant control station with emergency stop.
- Includes a confirmation push-button for machine operation.
- Equipped with a perimeter safety cable device.
mali oglas
Bellpuig
1.228 km
Ravnalna stiskalnica
HidrogarneTL 100/10000E
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.900 mm, dolžina mize: 10.000 mm, skupna širina: 3.660 mm, skupna dolžina: 10.200 mm, višina mize: 900 mm, širina mize: 2.545 mm, stiskalna sila: 100 t, skupna masa: 26.000 kg, obratovalna hitrost: 9 mm/s, hitrost vzvratne vožnje: 14 mm/s, pritisk: 320 letvica, moč: 4 kW (5,44 KM), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER-LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES
TECHNICAL DATA
Force T 100
Motor Power kW 4
Motor Ventilation Switch Power kW 0.37
Bridge Travel Motor Power kW 0.75
Working Speed mm/s 3
Approach Speed mm/s 9.2
Return Speed mm/s 14.4
Max. Pressure Bar 320
Usable Area mm 10,000 x 2,545
Ram Stroke max. mm 450
Max. Open Height mm 600
Lateral Travel mm 2,120
Portal Travel mm 9,140
Working Height mm 900
Total Length mm 10,200
Total Width mm 3,660
Height mm 2,900
Weight kg 26,000
The TL-100/10000E hydraulic press belongs to the T/NC series and is specifically designed for straightening welded structures and cut plates.
As with all our hydraulic presses from this series, its design facilitates the loading and unloading of large parts. Thanks to the lateral movement of the cylinder and longitudinal movement of the bridge, different pressing points can be accessed without having to reposition the workpiece.
The machine meets all essential safety and health requirements according to CE regulations.
STRUCTURE AND TABLE
• Electro-welded frame made exclusively of S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and accuracy.
• Constructed and designed with finite element software.
• The longitudinal movement of the bridge is achieved by a frequency inverter and toothed belt.
• The lateral movement of the head is motorized.
CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with honed sleeve, chrome plated piston, and maintenance-free wear guides.
• Equipped with a removable and replaceable cushion to prevent piston wear and machined on the end to accommodate the tool.
• Features a standard anti-rotation device for the cylinder and a calibrated front with limit switches for cylinder stroke adjustment.
• Motorized hydraulic unit with two speeds and automatic shut-off of fast speed.
• Cylinder decompression valve.
• Pressure regulator.
• Glycerine pressure gauge with tonnage display.
ELECTRICAL SYSTEM AND SAFETY
• The control panel features a selector switch for manual or semi-automatic operation.
• There is also a selector switch for choosing between rapid approach and slow working speed.
• Operation via a pendant control with emergency stop and low-voltage control.
Ndjdpfx Adowkvmnetsd
• Includes a button to confirm the operating cycle.
mali oglas
Bellpuig
1.228 km
Ravnalna stiskalnica
HidrogarneHV-300-NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HV-300NC, skupna višina: 1.840 mm, višina mize: 950 mm, skupna širina: 3.200 mm, skupna dolžina: 2.500 mm, stiskalna sila: 300 t, dolžina mize: 750 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 15 mm/s, hod: 450 mm, hitrost stiskanja: 2 mm/s, Oprema: dokumentacija / priročnik, TECHNICAL DATA:
Press Force: 300 t
Motor Power: 7.5 kW
Throat Depth: 405 mm
Working Speed: 2 mm/s
Approach Speed: 9.9 mm/s
Return Speed: 14.7 mm/s
Max. Pressure: 320 bar
Piston Stroke: 450 mm
Support Table: 2,500 x 750 mm
Guide Bar Diameter: 60 mm
Main Table: 750 x 750 mm
Max. Opening Between Tables: 900 mm
Working Height: 950 mm
Support Blocks: 150 x 150 x 750 mm
Overall Length: 3,200 mm
Overall Width: 2,500 mm
Overall Height: 1,800 mm
Weight: 13,300 kg
DESCRIPTION:
Our horizontal hydraulic ram presses of the HV/NC series are available with three different press forces, ranging from 150 to 300 tons. These horizontal hydraulic presses are specifically designed for straightening and bending sections, bars, and beams. The horizontal construction design allows effortless processing of large beams and profiles. The latest generation of the HV/NC series horizontal hydraulic presses has evolved into a highly versatile machine, capable of accommodating a wide variety of tooling options.
STRUCTURE AND TABLES
The HV/NC series horizontal hydraulic straightening presses are constructed with a C-shaped, fully welded frame made entirely from S355JR steel. Following welding, the frame is stress-relieved and precision-machined to ensure perfect parallelism and accuracy. Calculations and manufacturing are performed using finite element method software. This ensures our consistently high standards of robustness, precision, and quality.
The presses are equipped with a main sliding table and a rear support table, both manufactured from high-strength steel and featuring T-slots compliant with DIN 650. Support blocks made from C45E steel are standard. The main table guarantees perfect parallelism via four cylindrical guides with maintenance-free, low-friction bimetal bushings. Each machine comes standard with two height-adjustable support rollers on each side.
Ndsdpfxjwk Hkqs Adted
CYLINDER AND HYDRAULIC SYSTEM
The double-acting cylinder is crafted from seamless, cold-drawn tubing with a chrome-plated piston and wear-resistant, maintenance-free guides. The hydraulic power unit is motor-driven, featuring a two-speed system with automatic cut-off of the rapid speed. A cylinder decompression valve is included.
ELECTRICAL INSTALLATION AND SAFETY
The machine is equipped with a SIEMENS safety PLC (SIMATIC S7 1200) and a 4-inch touchscreen (MTP-400) mounted above the electric foot pedal. This allows for programming of operation modes in semi-automatic and automatic, as well as parameters for force, stroke, and dwell time of the upper cylinder. It has a storage capacity for 99 recipes, with all values programmable for each recipe.
The electrical control panel features a selector switch to choose between manual or automatic operation, along with a key switch for maintenance tasks. Electrical and hydraulic controls are redundant and self-monitored. An additional safety block and self-monitoring safety devices for all movements are integrated.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
Hidrogarne250 T 4-Säulen Tiefziehpresse MV-250E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-250E/NC, stiskalna sila: 250 t, širina mize: 2.500 mm, dolžina mize: 1.150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING APPLICATIONS
TECHNICAL DATA
Press force / main cylinder T: 250
Press force cushion T: 50
Motor power kW: 11
Piston stroke mm: 500
Approach speed mm/s: 80
Working speed mm/s: 7
Return speed mm/s: 105
Column diameter mm: 150
Max. pressure Bar: 260
Usable table surface mm: 2,500 x 1,150
Column distance mm: 2,500 x 700
Max. daylight opening mm: 1,000
Cushion size mm: 950 x 750
Working height mm: 1,100
Overall height mm: 3,650
Weight kg: 15,000
The hydraulic four-column press MV-250E/NC belongs to the M/NC series and has been specially designed for higher precision and capacity, particularly for deep drawing operations.
Ndedpfxswkuchj Adtod
Equipped with an upper and lower table made of C45E steel, both fitted with DIN-650 T-slots to ensure minimal friction during the vertical movement of the upper table. Maintenance-free bimetallic bushings and perfectly parallel guidance via four chrome-plated and ground cylindrical columns further enhance performance.
An optimized hydraulic system operates at pressures below 290 bar, ensuring long service life and reliable operation.
The machine meets all essential safety and health requirements in accordance with CE regulations.
STRUCTURE AND TABLES
• Consists of three electro-welded blocks, made exclusively from S355JR steel.
• Stabilized and machined at the end of the welding process to guarantee perfect parallelism and precision.
• Designed and calculated using finite element software.
• The lower table incorporates a 50-tonne hydraulic cushion with a useful area of 950 x 750 mm and three front tool support brackets for supporting tools outside the press.
• Features an integrated SIEMENS KTP-400 NC for stroke control of the upper table, speed changes, and cushion regulation.
• Includes a SIEMENS S-7 PLC, allowing for the programming of 99 memory settings.
CYLINDER AND HYDRAULIC SYSTEM
• Single-acting cylinder with honed liner, chrome-plated piston, and wear-resistant guides.
• Entire hydraulic unit mounted on the upper section of the press.
• Hydraulic system includes a low-noise Denison hydraulic pump and an air-oil cooler.
• Contains:
- Decompression system
- Pressure solenoid valves
- Pre-fill valves
- Pilot-operated check valves
- Non-return valve
- Pressure relief valve
- Load-holding safety valve
ELECTRICAL INSTALLATION AND SAFETY
• Equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch KTP-400 touchscreen on the control panel. Enables programming of semi-automatic and automatic modes, power, stroke, and dwell time. Recipe storage for up to 99 setups, each able to program all aforementioned parameters.
• The electrical control panel features a selector switch to choose the operating mode: manual "setup" or automatic cycle "production".
• Machine operation is via electrical low-voltage foot pedals.
• Safety equipment includes: front area light curtain (Category IV), two fixed side guards, and one rear interlocked guard with magnetic safety switch.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
Hidrogarne/GarnetMV-1000/NC SINCRO
Klic
Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 7.000 mm, skupna širina: 4.750 mm, skupna dolžina: 6.000 mm, stiskalna sila: 1.000 t, hitrost vzvratne vožnje: 60 mm/s, We are offering a new build of the machine shown here. The machine was commissioned in 2021 and can be inspected at the customer's site.
Force tn 125 - 1000
Opening Force tn 100
Driven Speeds 1
Motor Power kW 75
Nodpfowpgwnex Adtjdd
Rapid Pre-fill Speed mm/s 100
Variable Working Speed mm/s 12-4
Return Speed mm/s 60
Guide Diameter mm 300
Maximum Pressure Bar 290
Usable Table Surface mm 4,750 x 2,200
Lower Table Travel mm 2,200
Vertical Movement of Upper Table mm 800
Between Columns mm 5,000 x 1,490
Total Width (Front) mm 6,000
Total Depth (Side) mm 4,750
Overall Height mm 7,000
Weight kg 150,000
Specially designed for the setup of progressive stamping tools.
STRUCTURE AND TABLES
• The frame is constructed from flame-cut steel and divided into three electro-welded monoblocks, made exclusively from S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and precision.
• Calculated and designed with finite element software.
• Cylindrical columns with a diameter of 300 mm offering high mechanical strength, ground and chrome-plated for low friction and wear resistance.
• Upper table with T-slots and anti-fall protection system.
• Usable table surface: 4,750 x 2,250 mm.
• A frame that can withstand 600 TN of concentrated force over 1/3 of its surface.
• The lower table is designed for a displacement of up to 50 TN and is supported by bronze guides with graphite loading and mechanical positioning centers for precise table placement.
CYLINDER AND HYDRAULIC UNIT
• 6 single-acting cylinders with honed sleeves, chrome-plated pistons, and wear-resistant guides.
• Four 50 TN hydraulic compensators mounted on the ends of the lower table.
• 800-liter hydraulic power unit with quiet Denison pump, automatic shutoff of rapid pre-fill speed, and working speed equipped with a decompression system.
• Proportional pressure system and optical measuring devices for upper table displacement control, with a synchronized electronic system to compensate for eccentric or unbalanced forces.
• Hydraulic unit cooling system with independent air-oil cooler.
• All M series hydraulic presses are fitted with a side pressure switch to set the optimal pressure for each application.
• Glycerin manometer with tonnage display.
ELECTRICAL INSTALLATION AND SAFETY
• Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12" touchscreen. Permits programming of semi-automatic and automatic operation modes, power, stroke, and dwell time on the upper table. 300 recipes can be stored, each recipe programmable for all above parameters.
• Low voltage operation via two-hand control station.
• Anti-drop protection system with hydraulic safety jaws.
• Category IV light curtains on the front and rear.
• Side protection panels with opening and safety micro-switches.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
Hidrogarne/GarnetMV-800/NC SINCRO
Klic
Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: nepreverjeno, skupna višina: 6.400 mm, skupna širina: 4.500 mm, skupna dolžina: 3.800 mm, obratovalna hitrost: 110 mm/s, hitrost vzvratne vožnje: 180 mm/s, tabela razdalj do bata: 1.500 mm, We are offering a newly-built version of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer's site.
Technical Data:
Pressing force (T): 800
Opening force (T): 80
Ndodpewlrv Ujfx Adtod
Motor power (kW): 55/75 + 55/75
Ram stroke: 1000 mm
Rapid approach speed (mm/s): 110
Working speed (mm/s): 6
Return speed (mm/s): 180
Guide column diameter (mm): 250
Maximum pressure (bar): 250
Usable table area (mm): 3,500 x 2,000
Lower table displacement (mm): 2,000
Distance between columns (mm): 2,000
Open height (mm): 1,500
Total width (front) (mm): 3,800
Total width (side) (mm): 4,500
Overall height (mm): 6,400
Weight (kg): 134,600
The MV-800E/NC-SINCRO press is specially designed for the setup and testing of dies, molds, and punches.
The four columns with 250 mm diameter, made from C45E steel, are manufactured specifically to withstand high stress.
It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability.
The press complies with all essential safety and health requirements pursuant to CE standards.
STRUCTURE AND TABLE
• A frame capable of withstanding 600 T of concentrated force on 1/3 of its surface.
• Lower table with T-slots.
• Upper table with T-slots.
• Usable table area: 3,000 x 2,000 mm.
CYLINDER AND HYDRAULIC UNIT
• Two double-acting hydraulic cylinders, each with 400 T capacity.
• Single-stage hydraulic power unit with automatic shutoff of rapid approach speed and independent operation. Equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table control movement; an electronic synchro system compensates for off-center or unbalanced forces.
• The press features a lateral pressure switch for optimal job-specific pressure adjustment.
• Glycerine manometer with tonnage display.
ELECTRICAL INSTALLATION AND SAFETY
• Electrical installation for operation with 1 or 2 speeds for the main cylinder feed.
• The press features both manual and automatic cycles (selectable via test mode switch):
• The manual cycle allows all press movements to be performed step-by-step at low speed.
• The automatic cycle enables the press to execute a full production cycle.
• Electrical safety system for the fall protection of the upper table.
• Lower table with hydraulic withdrawal and physical stops.
• The machine is equipped with a control panel featuring a touchscreen display for entering operating and calibration parameters.
• Two 1,000 mm optical safety barriers (Class IV) are installed at the front and rear.
• All Siemens electrical components are IP55-rated and manufactured according to current CE directives and regulations.
• Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-checking devices for functionality and safety. Includes testing and certification of proper functionality and the safety distance of the light curtains.
• Safety is further ensured by a laser and Class IV light curtain area protection system.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneFDL-150-100E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FDL-150-100E/NC, skupna dolžina: 1.200 mm, stiskalna sila: 150 t, širina mize: 800 mm, delovna višina: 600 mm, razmak između stupova: 1.250 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, DOUBLE COLUMN HYDRAULIC PRESS WITH TWO LATERAL CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR THE EXTRACTION OF THE MANDREL AND THE ROTOR SHAFT, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR
Equipped with a retractable table for stacking and handling rotors and stators.
Ndedpfxjwpg Awe Adted
Complies with all essential CE safety and health requirements.
FRAME AND TABLES
Comprises a rigid, electrically welded frame with fixed bed, manufactured exclusively from S355JR steel.
Stabilized and machined at the end of the welding process to guarantee perfect parallelism and precision.
Calculated and designed using finite element analysis software.
Mechanically movable T-slot table, 1200 x 800 mm, with 1,200 mm travel, fitted with a worm gear reducer and a 0.5 HP electric motor with brake.
Central hole in the table: 250 mm diameter, max depth 550 mm.
Useful lifting power of the table for movement: 4 tons.
Travel speed: 30 mm/sec.
Internal front width 1250 mm (distance between columns).
Working height: 600 mm.
2 hydraulic cylinders of 75 tons each (150 tons total), with 1,200 mm stroke, joined by a plate with 250 mm central hole.
Max. usable height (cylinder plate): 1,440 mm.
Min. usable height (cylinder plate): 200 mm.
EXTRACTION CYLINDER
1 central cylinder of 100 tons capacity, 1,200 mm stroke.
Prepared for mounting extraction clamp, rod end threaded M 35x1.5, thread length 40 mm.
Max. usable height (extraction cylinder): 1,600 mm (to root of rod thread).
Min. usable height (extraction cylinder): 400 mm (to root of rod thread).
HYDRAULIC UNIT
Two-speed hydraulic unit, 5.5 HP power “Siemens Motor”, with automatic disengagement of fast speed and independent speeds. Max. pressure 250 bar.
Pressure regulation system via proportional valves.
Air-oil cooler.
Temperature sensor.
Hydraulic unit installed on right side.
Includes a SIEMENS SIMATIC S7-1200 safety PLC and a 12” HMI touchscreen (MTP model) with 99 memory slots, allowing regulation of pre-pressing, pressing power, interference fit, and stroke of pressing and extraction cylinders, as well as dwell times during processes.
Redundant and self-monitored electrical and hydraulic controls. Additional safety block and self-monitoring devices for operation and safety are included. Verification and certification of correct operation and safety distance for photocells are included.
Operation by means of low-voltage two-hand electric pushbutton.
All installed electrical materials are Siemens: relays, contactors, main motor, etc.
Prepared for Industry 4.0 integration.
Safety features include Category IV photoelectric barriers on the front working area, two fixed side guards, and a rear hinged guard with magnetic disconnection sensor.
mali oglas
Bellpuig
1.228 km
Stiskalnica
HidrogarneFDM-150E/3000
Klic
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FDM-150E/3000, obratovalna hitrost: 7 mm/s, hitrost vzvratne vožnje: 9 mm/s, skupna masa: 10.000 kg, skupna dolžina: 2.750 mm, skupna širina: 800 mm, skupna višina: 3.100 mm, stiskalna sila: 150 t, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, HYDRAULIC PRESS FOR BENDING
The FDV-150E/3,000 double-column hydraulic press belongs to the F series and is custom-designed for bending operations.
It features an optimized hydraulic system operating at a pressure of 295 Bar, ensuring long-lasting durability and reliable performance.
The machine fully complies with all essential safety and health requirements according to CE regulations.
STRUCTURE AND TABLES
- Built with a rigid, fully-welded fixed-frame structure made exclusively of S355JR steel.
- The frame is stabilized and machined after welding to ensure perfect parallelism and precision.
- Designed and engineered using finite element software analysis.
- Equipped with upper and lower machined tables made of C45E steel with DIN-650 T-slots. The upper table ensures perfect alignment by means of four 80 mm diameter cylindrical side guides with maintenance-free, anti-friction bimetallic bushings.
- Lower table features a slotted surface of 3,100 mm x 600 mm.
CYLINDERS AND HYDRAULIC UNIT
Nsdpfx Adowpg D Uetsdd
- Two main double-acting cylinders with chromed plungers and maintenance-free wear-resistant guides.
- Single-speed motorized hydraulic power unit, including a cylinder pressure release valve.
- Glycerine-filled pressure gauge with readout in tonnes.
ELECTRICAL INSTALLATION AND SAFETY
- Equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touchscreen mounted on the electrical cabinet. Enables programming of semi-automatic and automatic operations, force, stroke length, and dwell time. Capable of storing up to 300 programs/recipes; all above parameters can be stored per recipe.
- Operated via a low-voltage electric foot pedal.
- For maximum safety, the press is fitted with category IV photoelectric safety barriers at the front working area, two fixed side guards, and a rear access-guard with magnetic interlock safety switch.
TECHNICAL SPECIFICATIONS
MODEL: FDM-150E/3000
Press force: 150 t
Motor power: 11 hp
Piston stroke: 250 mm
Working speed: 7 mm/s
Return speed: 9 mm/s
Maximum pressure: 295 Bar
Front clearance: 3,200 mm
Side clearance: 500 mm
Vertical working gap (clear distance between tables): 550 mm
Working height: 950 mm
Overall front width: 2,750 mm
Overall side width: 800 mm
Overall height: 3,100 mm
Weight: 10,000 kg
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneRM-100/NC
Klic
Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.675 mm, višina mize: 900 mm, skupna širina: 1.075 mm, skupna dolžina: 1.525 mm, stiskalna sila: 100 t, širina mize: 700 mm, dolžina mize: 500 mm, skupna masa: 2.540 kg, hitrost vzvratne vožnje: 60 mm/s, razdalja med stranskimi nosilci: 800 mm, hod: 250 mm, Oprema: varnostna svetlobna zapora, RIGID FRAME HYDRAULIC PRESSES
We have designed the R/NC series of motorized rigid frame hydraulic presses with a range of six different capacities, from 80 to 500 tons. Specifically engineered for stamping, die-cutting, and deep drawing operations.
The latest generation R series hydraulic presses have evolved to offer great versatility, including the ability to integrate these machines into automated production lines. They operate at hydraulic pressures below 320 BAR to ensure greater durability of the entire hydraulic system.
The R/NC series drawing and stamping presses are built with an electro-welded frame made exclusively of S355JR steel. The structure is stabilized and machined after the welding process to guarantee perfect parallelism and accuracy. Design and stress calculations are carried out by finite element analysis software, thereby ensuring our high standards of precision and quality are consistently met.
Ndsdpswlgkmofx Adtsd
Equipped with machined C45E steel upper and lower tables with DIN-650 T-slots. The upper table maintains perfect parallelism via four lateral cylindrical guides with self-lubricating, maintenance-free bimetallic bushes.
The press features a double-acting cylinder with a lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides.
The hydraulic power unit has two speeds, with automatic disengagement of the rapid approach. Cylinder decompression valve included.
Standard equipment includes a SIEMENS SIMATIC S7 1200 safety PLC and a 4” touch screen, model MTP-400, mounted above the electric foot pedal. Allows programming of operating mode (semi-automatic and automatic), pressing force, stroke, and dwell time of the upper ram. Storage capacity of up to 99 recipes; all parameters above can be programmed in each recipe.
The electrical panel features a selector for choosing between manual and automatic operation, and a key-operated selector for maintenance work.
Electrical and hydraulic operations are redundant and self-monitored. An additional safety block and self-monitoring devices are included for operation and safety.
Includes inspection and certification of correct operation and safety distances for light curtains.
To ensure operator safety, type 4 PLe safety light curtains are installed at the front working area, accompanied by two fixed side guards and a rear opening guard with a magnetic interlock switch, polycarbonate windows, and LED interior lighting.
Hydraulic cushion or ejector installation is supported.
Complies with all essential health and safety requirements per CE directives.
Supplied with instruction manual.
Technical Data (100 T Model)
Force: 100 T
Motor power: 13 kW
Working speed: 3–9 mm/s
Approach speed: 40 mm/s
Return speed: 60 mm/s
Maximum pressure: 319 bar (up to 320 bar)
Piston stroke: 250 mm
Guide diameter: 50 mm
Lower table: 700×500 mm
Upper table: 600×450 mm
Maximum vertical clearance: 500 mm
Frontal opening: 800 mm
Working height: 900 mm
Total front width: 1,525 mm
Total depth: 1,075 mm
Total height: 2,675 mm
Weight: 2,540 kg
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneMV-600E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-600E/NC, stiskalna sila: 600 t, širina mize: 990 mm, dolžina mize: 890 mm, obratovalna hitrost: 5 mm/s, skupna masa: 23.000 kg, hitrost vzvratne vožnje: 18 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, HYDRAULIC FOUR-COLUMN PRESS FOR PUNCHING, DRAWING, PIERCING, AND DEBURRING OPERATIONS
Press Force: 600 tons
Motor Power: 40 HP at 440 Vac / 60Hz
Working Speed: 5 mm/s
Approach Speed: 15 mm/s
Return Speed: 18 mm/s
Ram Stroke: 1,015 mm (40")
Guide Rod Diameter: 200 mm
Usable Table Area: 990 x 890 x 130 mm (39" x 35" x 5")
Distance Between Columns: 990 x 370 mm
Vertical Clearance: 1,625 mm (64")
Working Height: 990 mm (39")
Lower Hydraulic Knockout Force: 80 tons
Lower Knockout Stroke: 406.4 mm (16")
Upper Hydraulic Knockout Force: 80 tons
Upper Knockout Stroke: 406.4 mm (16")
Overall Width (Front): 1,850 mm
Overall Depth (Lateral): 1,700 mm
Overall Height: 4,500 mm
Ndodpfswpggiox Adtjd
Weight: approx. 23,000 kg
The MV-600E/NC Four-Column Hydraulic Press is part of the M/NC series, specially developed for higher precision and capacity and designed for punching, deep drawing, stamping, and deburring operations.
STRUCTURE AND TABLES
• Made of three electrically welded blocks manufactured exclusively from S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and precision.
• Designed and calculated using finite element software.
• Equipped with a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel, enabling programming of force, ram stroke, and speeds. It offers memory for up to 300 stored work cycles.
CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free wear guides.
• Motorized hydraulic unit with two speeds and automatic cut-off for rapid advance. Features a high-pressure pump and a 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. Side-mounted pressure switch allows adjustment of pressure to suit each specific operation.
• Glycerine pressure gauge with tonnage indication.
ELECTRICAL INSTALLATION AND SAFETY
• Electrical control cabinet with selector switches for manual, semi-automatic, or automatic operation, and for fast or slow speed selection.
• Equipped with PLC support for internal manoeuvres and decompression times.
• Operation via low-voltage dual hand control panel.
• Electrical and hydraulic operations are redundant and self-monitored, featuring an additional safety block and self-checking safety devices for both controls and operations. Systems include testing and certification of proper function and safety distance for light barriers.
• Safety is ensured by Category IV safety light curtains in the front work area, two fixed side guards, and a rear movable guard with magnetic shut-off detection.
• Machine is equipped with IXON system for online connectivity in case of malfunctions or for reprogramming.
• Maintenance ladder with upper platform (scaffold) for repair access.
mali oglas
Bellpuig
1.228 km
Hidravlična stiskalnica
HidrogarneMV-300E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-300E/NC, skupna višina: 3.500 mm, skupna širina: 1.800 mm, skupna dolžina: 2.300 mm, stiskalna sila: 300 t, širina mize: 1.250 mm, dolžina mize: 1.250 mm, skupna masa: 18.000 kg, pritisk: 320 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, FOUR-COLUMN HYDRAULIC PRESS FOR STAMPING, DEEP DRAWING, DIE CUTTING, AND DEBURRING JOBS
Custom designed for greater precision and capacity, and especially manufactured for deep drawing, die cutting, and deburring operations.
Ndjdpfx Adswphhnstjd
Equipped with an upper and lower table made of machined C45E steel with DIN-650 T-slots to ensure minimum friction during the vertical movement of the upper table, thanks to maintenance-free bimetallic bushings and perfect parallelism ensured by four cylindrical, chromed, and ground columns.
Uses an optimized hydraulic system with a pressure of 290 Bar, guaranteeing long service life and reliable operation. Fully complies with all essential safety and health requirements according to CE regulations.
mali oglas
Köln
795 km
Prikolica za cisterne
FruehaufGas, compressed helium, hydrogen
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Plin, stisnjen helij, vodik, 196 bar polpriklopnik
Proizvajalec: Fruehauf
Leto: 1996
Ndjdpfx Adsvvivzetjd
Lastna teža: 26.480 kg
Skupna teža: 30.630 kg
Volumen rezervoarja: 16,5 m3
Obratovalni tlak: 196 bar
Na voljo imamo tudi druge cisterne za LIN, LOX, LAR, LNG in CO2, argon, kisik, dušik in ogljikov dioksid, LNG, vodik, metan
Z veseljem odgovorimo na vaša vprašanja po telefonu ali e-pošti
mali oglas
Rijkevoort
904 km
Vijačni kompresor
Atlas Copcosf22+ Scroll + CD45+ droger set
Klic
Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SF22+, skupna masa: 687 kg, moč: 22 kW (29,91 KM), volumenski pretok: 144 m³/h, obratovalni tlak: 8 letvica, Atlas Copco
kompresor SF22+ sušilnik CD45+ set
Oljebrez zraka kompresor
Tlak: 8 bar
Q: 2,4 m³/min
22 kW
Teža: 687 kg
Leto izdelave: 2024
Neuporabljen kompresorski in sušilni set
Vsi zaposleni govorijo nizozemsko, nemško in angleško
Ndjdpfx Ajxby H Djdtod
Cene so brez DDV
Možna dostava (doplačilo)
(Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do predhodne prodaje)
mali oglas
Torino
584 km
Izpušni sistem
NETTWORK SAHYDROGOMMAGE Miniskid VA25 Vortex
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 772 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 825E, skupna masa: 640 kg, skupna širina: 1.000 mm, skupna dolžina: 1.400 mm, skupna višina: 1.050 mm, raven hrupa: 78 dB, priključek za stisnjen zrak: 7 letvica, moč: 22,06 kW (29,99 KM), lastna masa: 400 kg, največja dovoljena obremenitev: 650 kg, vrsta goriva: bencin, barva: svetlo siva, gorivo: Super E10 95, Oprema: dokumentacija / priročnik, Skid – autonomous unit consisting of a compressor, limestone tank for low-pressure pneumatic projection (between 0.5 and 1.5 bar on the surface). An air-water-microgranulate mixture “cleans” the surface by gently laterally attacking it, without altering the substrate.
Ndodpfxewm I Tfj Adtod
High-pressure washer pump with lance and 15 m hose, 150 bar Comet, integrated 240-liter water tank. Entirely powered by a LOMBARDINI FOCS petrol engine.
IDEAL for chemical-free cleaning of BLACK CRUSTS, WEATHERING, GRAFFITI, ADHESIVES, POSTERS, STUBBORN DIRT, LIME RESIDUES, etc.
mali oglas
Wiefelstede
931 km
Rezalnik lesa
ETP Hydro-GripEI-40/60-92
Klic
Stanje: rabljeno, Wood milling cutter, cutter head, milling tool, wood milling cutter, profile cutter
- Wood milling cutter: with ETP Hydro-Grip
- Outer diameter: 180 mm
- Height: 46 mm
- Bore: 40 mm
Ndedpfx Adjcazrvetjd
- Quantity: 2 cutters available
- Price: per piece
- Weight: 10 kg
mali oglas
Deventer
932 km
Royen Ipsam Droge stoffen zuiger/Sucking and blowing dry substances (Sesanje in pihanje suhih snovi)
RoyenIpsam Droge stoffen zuiger/Sucking and blowing ...
Klic
Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 04/2007, vzmetenje: zrak, barva: modra, Leto izdelave: 2007, Oprema: ABS, = Additional options and equipment =
- Air suspension
= Notes =
Royen/Ipsam suction and blowing unit for dry substances
Engine: Volvo Penta TWD 1031VE turbo diesel powerpack
2x SIHI vacuum pump 3000 m³/h
Ndedpewwtmlofx Adted
Wittig Cyclone blower T5CDL12L71
3-axle BPW air suspension
Belgian registration
= Further information =
Axle brand: BPW
Suspension: Air suspension
Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50%
Rear axle 2: Tyre tread left: 50%; Tyre tread right: 50%
Rear axle 3: Tyre tread left: 50%; Tyre tread right: 50%
Technical condition: good
Visual condition: good
mali oglas
Wiefelstede
931 km
Rezalnik lesa
AKE Hydro-GripT20002587
Klic
Stanje: rabljeno, Wood milling cutter, cutter head, milling tool, wood cutter, profile milling cutter
Ndedpfocazr Ajx Adtjd
-AKE wood milling cutter with: AKE Hydro-Grip
-Outer diameter: Ø 165 mm
-Height: 60 mm
-Bore: Ø 40 mm
-Cutters: 1
-Price: complete set
-Weight: 8 kg
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Ebenweiler
459 km
Stružnica z vodilnim/vlečnim vretenom
ImatecID175N
Klic
Stanje: dober (rabljeno), Interna št. artikla: 25057
Ndsdow U Dq Uspfx Adtsd
Stružnica z vodilno in vlekalno vreteno
Iz srednje tehnične šole!
Proizvajalec: Kirloskar Imatec
Tip: ID 175N
+ 3-osni digitalni prikaz
+ Multifix "B" osnovni nosilec z enim nosilcem za orodje
+ Trije-čeljustna glava (Röhm 160)
+ Zaščita glavnika z izklopnim stikalom
+ Vrtalna glava
Leto izdelave: ni razvidno
Razdalja med konicama: pribl. 1000 mm
Višina konic: pribl. 175 mm
Premer struženja nad suportom: pribl. 210 mm
Prehod: pribl. 40 mm
Hitrost vrtenja: 35–2000 obr/min
Konus zadnjega držala: MK3
Mere (D x Š x V): 190 x 110 x 175 cm
Teža: pribl. 500 kg
mali oglas
Tata
301 km
Paletni viličar s pomičnim drogom ETV 325, višina dviga 7300 mm
Jungheinrich ETV 3252500kg 7400mm
Klic
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, nosilnost: 2.500 kg, dvižna višina: 7.400 mm, vrsta goriva: električni, napetost baterije: 48 V, barva: oranžna, Oprema: CE označba, osvetlitev, popolna servisna zgodovina, Jungheinrich EVT 325 električni viličar na prodaj
Proizvajalec: Jungheinrich
Tip: EVT 235
Letnik izdelave: 2008
Nosilnost: 2.500 kg
Prosta višina dviga: 4.296 mm
Največja višina dviga: 7.400 mm
Razdalja do težišča: 600 mm
Hitrost vožnje brez bremena: 14 km/h
Hitrost dviga brez bremena: 0,64 m/s
Napetost baterije: 48 V
Nedpfx Adou Rqu Estedd
Kapaciteta baterije: 620 Ah
Teža z baterijo: 3.700 kg
mali oglas
Bitburg
758 km
Krilo prikolica - prikolica z drogovi / lestev prikolica
FensterFlügel 2 x 6 Sprossen
Klic
Leto izdelave: 2005, Stanje: dober (rabljeno), Krilarna voziček z 2 x 6 prečkami
Prečkasti voziček
Komisionarski voziček
Ndedjxacubepfx Adtod
Premičen
Dolžina: 1,1 m
Prečke: 0,55 m
Višina: 2 m
Lokacija: iz zaloge 54634 Bitburg
- na voljo takoj -
mali oglas
Bruchsal
586 km
Vodilni/povlečni vretenasti stružnica/WEILER DA260
WEILERDA 260x1000
Klic
Stanje: dober (rabljeno), WEILER DA 260x1000 Stružnica za vodenje in podajanje vretena
Ndodsxyugcopfx Adted
- Digitalni prikazovalnik, 3 osi "NOVO"
- Višina konic 260 mm
- Premer struženja nad posteljo 535 mm
- Premer struženja nad prečnikom 345 mm
- Razdalja med konicama 1000 mm
- Premer vretena 71 mm
- Območje vrtljajev 33 - 1500 obr/min
- Avtomatski vzdolžni/površinski pomiki
- Rezanje navojev / metrično / colsko / diametralno ipd.
- Konjiček MK 4
- Pogonska moč 7,5 kW
- Planski maticni vijak "NOVO"
- Osnovno držalo Multifix z vložkom
- Trivpenjalno vpenjalo 350 mm
- 2x Sili izklop
- Električna zaščita vpenjala "NOVO"
- Zadnja stena za ostružke
- Oprema za hladilno tekočino
- Vpenjalo za vrtanje / vrtljiva konica
- Dokumentacija
Dimenzije:
D x Š x V 2,7 x 1,5 x 1,7 metra / Teža 1700 kg
Pridržujemo si pravico do napak in napačnih vnosov.
Olajšamo vam iskanje: "vlečni drog"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.























































































































































































