Umrl Litja Stroj nakup rabljenega (26.978)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, model krmilnika: POWER CONTROL PC22, največja hitrost vrtenja: 12.000 obr/min, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive container for EVA hot-melt glue Premelter for EVA hot-melt glue Lsdsyqx U Hopfx Afgeri Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for roughing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper Edge Processing Unit 6 Glue scraper Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A25-M5-22-48408, natančnost ponavljanja: 0,004 mm, število osi: 7, Nakupna cena stroja je leta 2023 znašala 48.700 €! TEHNIČNE PODROBNOSTI Število osi: 7 Dolžina roke: 2,5 m Ponavljajoča natančnost: 0,0042 mm Volumetrična natančnost: 0,054 mm Lrjdpfxsyqwgbe Afgji PODROBNOSTI STROJA Datum kalibracije: 03.2023 Območje obratovalne temperature: 10 °C – 40 °C Obratovalna vlažnost: 95 % (brez kondenzacije) Obratovalna napetost: 100 – 240 V AC Frekvenca: 47/63 Hz Opombe: Brez profesionalne licence za CAM2 Probe/Taster Podatki, informacije in tehnične specifikacije so od proizvajalca, prodajalec ne prevzema odgovornosti.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 90 207, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 2.000 obr/min, poteza s peresom: 100 mm, Brez minimalne cene – zagotovljena prodaja za najvišjo ponudbo! TEHNIČNI PODATKI Pomik osi X: 1.000 mm Pomik osi Y: 500 mm Pomik osi Z: 650 mm Območje vrtljajev pogonske vretena: 40 - 2.000 min⁻¹ Hod pinole: 100 mm Območje pomika: 5 - 2.000 mm/min Hitri pomik: 4.000 mm/min Držalo orodja: SK 40 PODROBNOSTI O STROJU Ljdpeyv Avtofx Afgori Proizvajalec krmiljenja: Heidenhain

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.000 mm, največja hitrost vrtenja: 1.700 obr/min, model krmilnika: Heidenhain TNC 155, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Pomik osi X: 2.000 mm Pomik osi Y: 900 mm Pomik osi Z: 1.000 mm Vpenjalna površina: 2.200 x 960 mm Območje vrtljajev: 20 - 1.700 obr/min Vpenjalo orodja: SK 50 Hitri pomik: 10 m/min Število položajev glave za rezkanje: 4 PODROBNOSTI O STROJU Lredoyv Ar Uopfx Afgoi Model krmiljenja: Heidenhain TNC 155 Dimenzije in teža Zahtevan prostor (D x Š x V): pribl. 7.000 x 4.200 x 2.900 mm Teža stroja: pribl. 16 t

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7393, potovalna razdalja osi X: 500 mm, pomik osi Y: 360 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 4.000 obr/min, model krmilnika: Siemens 810, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! TEHNIČNI PODATKI Pomik X-os: 500 mm Pomik Y-os: 360 mm Pomik Z-os: 400 mm Območje vrtljajev: 20 - 4.000 min⁻¹ Dimenzije mize: 800 x 390 mm Območje podajalnih hitrost: 1 - 2.000 mm/min Ledeyv A A Hspfx Afgsri Hitri pomik: 5 m/min Število T-utorov: 6 Širina T-utorov: 14 mm Razdalja med T-utoroma: 63 mm Vpenjalni stožec: SK 40 Število prestavnih stopenj: 4 PODROBNOSTI O STROJU Tip krmilnika: Siemens 810 Skupna priključna moč: 9 kW Dimenzije in teža Prostorske mere (D x Š x V): pribl. 2.500 x 2.900 x 1.900 mm Teža stroja: pribl. 2.000 kg

Stanje: rabljeno, OTT MEGAtronic 111 Širokopasovni kalibracijski in fini brusilni avtomat 1. Brusilna enota s kalibracijsko valjčno enoto 2. Brusilna enota z elektronsko krmiljeno segmentno brusilno nogo Delovna širina 1100 mm Podajalna hitrost 5 + 10 m/min Lrjdpfeyw Rknex Afgsi Moč motorja brusilne enote pribl. 11 kW Stroj je SERVISIRAN v delavnici Na zalogi v Liebochu

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Nove delovne košare za teleskopske nakladalce! PROIZVEDENO V AVSTRIJI! Na voljo vsi standardni priključki! (Manitou, Merlo, JCB, Bobcat, JLG, Kramer, Terex, CAT, Genie, Liebherr, Volvo, Ausa itd.) S CE! Lodpfx Afoywx Egjgeri Tudi z nastavki za uporabo z viličarjem! Lastna teža: 178 kg Nosilnost: 200 kg (2 osebi) Dimenzije (d/š/v): 215 / 100 / 120 cm Prašno barvano v RAL 3000 Prodajna cena: 1.990,-- neto na kos! Možnost pošiljanja!

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Lredpfx Afsywuvnjgji Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Na zalogi v Lieboch

Stanje: rabljeno, OTT Comet-2 1100 Lrjdpjywiyzsfx Afgsi Širokopasovni brusilni stroj Širina brušenja 1100 Stroj ni preizkušen Priporočen servis Brez garancije / brez jamstva Iz zaloge Lieboch, NETO 1.900,00 €

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm Ledjywh Epopfx Afgeri avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Lsdpfxeywh A Ie Afgjri Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Lredpjywhv Ujfx Afgoi Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: zelo dobro (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2007, vrsta aktuacije: hidravlični, število valjev: 3, premer gredi: 60 mm, premer valja: 224 mm, skupna masa: 980 kg, Oprema: dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, Piramidni profilni stroj s tremi valji SAF DS 80 HP Rabljeno. Leto izdelave: 2007 "CE". Takojšnja razpoložljivost, razen če je že prodan. Navodila za uporabo in vzdrževanje. Št. 03 pogonskih valjev. Hidravlični pogon. Pametni merilnik višine. Enodelno preklopno osnovno ohišje. Hidravlično nastavljanje ukrivnega valja. Standardni univerzalni valji. Premer osi: 60 mm. Lsdpfx Afeyw Nh Esgori Premer valjev: 224 mm. Medosna razdalja: 160 mm. Ukrivljanje profila: 140 x 130 mm 85 x 20 - 100 x 12 mm 50 mm kvadrat 80 x 80 x 8 mm Moč motorja: 5,5 kW Teža: 980 kg Komplet valjev različnih velikosti za ukrivljanje okroglega materiala: Trio: premer 22 mm Trio: premer 34 mm Trio: premer 48 mm Trio: premer 62 mm

Stanje: dober (rabljeno), Pod napetostjo – mogoče preizkusiti Lrsdpsyw Ua Hsfx Afgei

Stanje: zelo dobro (rabljeno), Motor power 1.2 HP, 400 V, 50 Hz Speed: 2800 rpm Drill table size: 650 x 330 mm Transverse travel: 300 mm Longitudinal travel: 150 mm Lodevzramepfx Afgjri Height adjustment: 170 mm Table height: 880 mm Weight approx. 280 kg

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Lededd Hi Espfx Afgsri Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: Lrjdpfxsv Tb Hgo Afgji • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Ledpjr A Eq Rjfx Afgsri Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. Lrodjdcdwbepfx Afgoi The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: zelo dobro (rabljeno), Spindle Moulder SCHELLING FZ 4 Heavy cast iron construction Motor speeds: 2250, 3000, 4500, 6000, 9000 rpm Motor power: 4.5 kW, 400 V, 50 Hz Spindle diameter: 30 mm Ljdpfxext N Dvo Afgjri Spindle height adjustment: 100 mm Table size (L x W): 1100 x 900 mm Extraction diameter: 120 & 80 mm Spindle with forward and reverse rotation Electric motor brake Milling fence adjustable and fine-tunable OERTLI fence jaws with aluminium insert INCLUDING HOLZHER power feed unit 3 rollers 4 speeds Machine dimensions (L x W x H): 1100 x 900 x 1200 mm Machine weight approx. 750 kg Note on used machines: • Technical specifications and intermediate sale subject to change. • Listed prices are ex works, loaded free of charge at location. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. Lrjdpfx Aocuwptsfgji INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) Lrodpfxjd Supgj Afgsi - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: Lodpfjhy Tlrjx Afgjri - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: Lrsdpfol D Rp Eox Afgei F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Lrodoc S Di Ropfx Afgsi Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...