Tos Fn nakup rabljenega (14.989)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 50166, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 2.295 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 9 m/min, hitri pomik os Y: 1 m/min, hitri pomik na osi Z: 2 m/min, hitrost pomika os X: 3 m/min, hitrost podajanja osi Y: 1 m/min, hitrost podajanja os Z: 2 m/min, največja hitrost vretena: 710 obr/min, hitrost vretena (min.): 15 obr/min, največja hitrost vrtenja: 710 obr/min, skupna širina: 8.500 mm, skupna višina: 7.150 mm, skupna dolžina: 20.720 mm, dolžina mize: 9.000 mm, širina mize: 2.000 mm, vrtilni moment: 6.500 Nm, razmak između stupova: 2.750 mm, leto zadnje generalne obnove: 2003, višina mize: 1.000 mm, obremenitev mize: 45.000 kg, moč vretenovega motorja: 50.000 W, teža obdelovanca (maks.): 45.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, GENERAL MACHINE CHARACTERISTICS The main feature of the machine is a rigid gantry with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical VFS 160 milling heads. In addition, the gantry can be equipped with one or two lateral (horizontal) VFS 160 milling heads. The aforementioned spindle types can be fitted with auxiliary spindle heads, with up to 4 units available. The clamping surface of the machine consists of two joined clamping tables, which can also be used individually when separated (only one table can be in operation at a time). Clamping Table Table dimensions (per table): ..... 2,000 x 4,000 mm Total length of combined tables: ..... 9,000 mm Clamping area of combined tables: ..... 8,500 mm Clamping T-slots (width x spacing x number): ..... 36 mm x 180 mm x 11 pcs Height of the worktable from base: ..... 1,000 mm Load capacity per 1 m table length: ..... 5,000 kg Travel of one table: ..... 4,250 mm (combined tables 9,000 mm) Working feed rate of table: ..... 15 – 3,000 mm/min Rapid traverse: ..... 9,000 mm/min Gantry with Height-Adjustable Crossbeam Clearance between columns: ..... 2,750 mm Vertical adjustment of crossbeam: ..... 2,295 mm Crossbeam feed: ..... 750 mm/min Vertical Spindle Head VFS 160 Spindle taper: ..... ISO 60 Spindle power: ..... 50 kW Speed range: ..... 15 – 710 rpm Working feed: ..... 10 – 2,000 mm/min Rapid traverse: ..... 2,000 mm/min Distance from spindle head face to clamping table: ..... 425 – 2,720 mm Horizontal Spindle Head VFS 160 Spindle taper: ..... ISO 60 Spindle power: ..... 50 kW Speed range: ..... 15 – 710 rpm Working feed: ..... 5 – 1,000 mm/min Rapid traverse: ..... 1,000 mm/min Distance from spindle head face to table centering T-slot: ..... 377 – 1,177 mm Overall machine dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Auxiliary Spindle Heads: NVS Head (Extension Adapter) Spindle taper: ..... ISO 60 Speed range: ..... 15 – 710 rpm Max transmitted power from 60 rpm: 40 kW Max torque: ..... 6,500 Nm HFUS Head (Universal Milling Head) Spindle taper: ..... ISO 60 Speed range: ..... 15 – 710 rpm Laodjxpudtepfx Ah Aek Max transmitted power from 80 rpm: 22 kW Max torque: ..... 2,700 Nm Rotational adjustment in vertical axis: ..... 360° Rotational adjustment in horizontal axis: ..... 360° Quill travel: ..... 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) Spindle taper: ..... ISO 60 Speed range: ..... 15 – 710 rpm Max transmitted power from 60 rpm: 40 kW Max torque: ..... 6,500 Nm Rotational adjustment ...

Stanje: dober (rabljeno), I am purchasing a multi-blade saw of Czech manufacture, TOS Svitavy PKSN32. Cutting height under the blade: 120 mm (adjustable) Maximum cutting width on the conveyor belt: 30 mm Open design / allows insertion of wider parts Motor: 45 kW Maximum main saw blade diameter: 350 mm Feed speed controlled by variator up to 36 m/min Lajdpfsmk E D Isx Ah Aek Total weight: approx. 3,500 kg Includes blades and spacer rings The machine is in stock in Kežmarok, Slovakia. Available immediately.

Leto izdelave: 1990, Stanje: dober (rabljeno), HEIDENHAIN TNC-355 Travel paths: 850 x 500 x 450 mm Table size: 1250 x 500 mm Spindle taper: ISO 50 Spindle speeds: 35.5–1800 rpm Lajdpfx Ahsfg Ep De Aok Various accessories MARCELS MASCHINEN CH

Stanje: rabljeno, Centre distance 2000 mm Centre height 250 mm Swing over bed 500 mm Swing over cross slide 330 mm Swing in gap 580 mm Spindle speeds 14-2240 rpm Equipped with: 3-jaw chuck 250 mm 4-jaw chuck 370 mm 2 steady rests Quick-change toolpost with 12 holders Roller centre Grinding attachment Laodpfxjxv Shpj Ah Ajk Various turning tools

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 900 mm, hitro pomikanje X-os: 10 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 10 m/min, vrtilni moment: 1.200 Nm, proizvajalec krmilnikov: Heidenhain iTNC 426, teža obdelovanca (maks.): 9.000 kg, skupna višina: 3.320 mm, skupna dolžina: 9.660 mm, skupna širina: 4.918 mm, hitrost vretena (min.): 11 obr/min, največja hitrost vretena: 2.500 obr/min, The machine is currently disassembled and undergoing repair within the following scope: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the independent balancing circuit of the console - Milling head “O” – complete overhaul including gear replacement - Replacement of gearbox bearings - Replacement of belts - Repair of ball screws and their mounts - Resealing of hydraulic circuits throughout the machine and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and seal modernization - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and spindle motor - Repair and alignment of Indramat drives - Overhaul of the electrical cabinet with control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of cabling for the Heidenhain i TNC 426 system - Overhaul of the operator panel - Overhaul of the Heidenhain i TNC 426 control system including keyboard and display unit - The machine will be fully functional with geometric accuracy confirmed by protocol - New paintwork, in RAL 5005 and RAL 9010 color scheme Technical data of the machine Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Table surface area: 1000 x 4000 mm Number of table T-slots / pitch: 7 / 140 mm T-slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel "X": 4000 mm Cross travel "Y": 1000 mm Vertical travel "Z": 900 mm Minimum distance from horizontal spindle axis to clamping surface of the table: 150 mm Maximum distance from horizontal spindle axis to clamping surface of the table: 1500 mm Minimum distance from face of vertical spindle to clamping surface of the table: 130 mm Maximum distance from face of vertical spindle to clamping surface of the table: 1030 mm Distance from horizontal spindle face to inner edge of table: 80 mm Distance from vertical spindle axis to inner edge of table: 100 mm Spindle taper: ISO 50 Clamping force of the retention mechanism: 16,100 N Horizontal spindle swivel – both directions: 180° Vertical spindle swivel – both directions: 180° Spindle head … positionable in 2.5° increments Usable motor power of main drive: 22 kW Lajdpsxnkkajfx Ah Aok Spindle speed range: 11 ÷ 2500 rpm Number of spindle speed steps: stepless Feed range: 1 ÷ 5000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Stanje: rabljeno, Leto izdelave: 1988, Centre height 350 mm Machine weight approx. 50 kg Lsdpfsnlbk Rex Ah Ajak Spindle mount MK5

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 780 mm, model krmilnika: HEIDENHAIN TNC 426, največja hitrost vretena: 2.500 obr/min, DÉTAILS TECHNIQUES Courses Course X : 1 600 mm Course Y : 1 000 mm Course Z : 780 mm Nombre d’axes d’usinage (hors axes parallèles) : 5 Table Surface de bridage (gauche-droite) : 1 000 mm Surface de bridage (avant-arrière) : 1 000 mm Poids pièce (max) : 6 000 kg Axe rotatif : C > Positionnement : 0,001 ° Broche/tête de fraisage Type de broche : Tête pivotante > Positionnement : 2,5 ° Plage de vitesse : jusqu’à 2 500 tr/min Type de cône : ISO SK 50 Puissance d’entraînement : 22 kW Magasin d’outils Nombre d’outils : 60 Automatisation pièce Nombre d’emplacements : 2 Longueur des palettes : 1 000 mm Largeur des palettes : 1 000 mm Nombre de palettes : 2 DÉTAILS SUR LA MACHINE Dimensions & Poids Encombrement (gauche/droite) : 6 400 mm Encombrement (avant/arrière) : 6 900 mm Hauteur totale : 4 000 mm Poids total : env. 26 000 kg Lsdpfx Aexb Rpcoh Aoak Commande HEIDENHAIN TNC 426

Stanje: rabljeno, Leto izdelave: 1966, dolžina podajanja os X: 1.400 mm, dolžina pomika po osi Y: 440 mm, dolžina podajanja os Z: 450 mm, skupna višina: 2.430 mm, skupna masa: 5.100 kg, For sale is a milling machine, manufacturer Tos, model FA5V. The machine is in working condition. Lsdot E I Drspfx Ah Ajak It can be inspected under power. The machine is sold without the magnetic table and cutters (only the machine itself) from location 61279 Grävenwiesbach.

Stanje: zelo dobro (rabljeno), TOS SVITAVY FWC 50.2 Hobelbreite: 500 mm Maximale Hobelhöhe: 200 mm Untere Messerwelle: 4 Messer 5,5 kW Motor Obere Messerwelle: 7,5 kW Ljdpfsw A I Iujx Ah Ajak Rechte Spindel, Durchmesser: 40 mm 4 kW Motor Linke Spindel, Durchmesser: 40 mm 4 kW Motor Elektrische Höhenverstellung

Stanje: rabljeno, Leto izdelave: 1998, Premer struženja nad posteljo: 400 mm Premer struženja nad suportom: 260 mm Dolžina struženja: 1000 mm Višina konic: 200 mm Razdalja med konicami: 1000 mm Vretenova odprtina: 50,8 mm Število vrtljajev: 20–3150 min⁻¹ Lodpfx Ajxp Rzbsh Aoak Pomiki vzdolžni suport: 0,01 – 3,24 mm/obrat Pomiki prečni suport: 0,005–1,62 mm/obrat Teža stroja cca: 1,8 t Prostorske zahteve cca: 2,85 x 1,4 x 1,9 m Obratovalna napetost: 400 V Z vpenjalno glavo, Multifixom in digitalnim prikazom.

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, premer žaginega lista: 450 mm, največja širina rezanja: 450 mm, širina verige: 450 mm, vrsta vhodnega toka: trifazni, širina gosenic: 450 mm, delovna širina: 870 mm, premer diska: 450 mm, – zelo dobro stanje – češka proizvodnja – leto izdelave 1998 TEHNIČNI PARAMETRI: – širina gosenice: 450 mm Laedpfoxtabxex Ah Ajk – višina reza: 160 mm – maks. premer rezila: 450 mm – moč glavnega motorja: 45 kW – min. dolžina reza: 800 mm – maks. širina vhodnega materiala: 870 mm – premer osi: 65 mm – premer puše: 80 mm – pomik reguliran s frekvenčnim pretvornikom – razpon hitrosti pomika: 4-40 m/min – tri vrste povratnih zapahov – premer priključka: 300 mm – dimenzije (d/š/v): 240 x 210 x 200 cm – teža: 3300 kg

Stanje: rabljeno, Leto izdelave: 1980, Centre height 180 mm Lodpfx Ajub Uxmoh Asak Centre distance 1250 mm Swing over bed 360 mm Spindle bore 41 mm Spindle speeds 11–2800 rpm Machine weight approx. 1900 kg Swing over cross slide 215 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Premer vretena: 100 mm Miza: 1250x1250 Laedpfx Ahoxv Sbie Ajk

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 1.500 mm, premer brušenja: 400 mm, Technical data - Grinding length [mm]: 1500 - Grinding diameter [mm]: 400 - Table feed range [mm/min]: 0 - 10 - Minimum table feed increment [mm]: 0.001 - Tailstock sleeve taper (Morse): 5 - Grinding wheel dimensions [mm]: 500x80x203 - Grinding wheel drive motor power [kW]: 11 - Workpiece drive motor power [kW]: 3.5 - Overall dimensions [mm]: length: 6650 width: 2300 (without control panel) height: 1800 - Machine weight [kg]: 6900 - Centralized lubrication system - Mitsubishi control system - Wheelhead movement – ball screw and servo motor drive - Table movement – ball screw and servo motor drive - Workhead – equipped with a new motor and stepless speed regulation controlled via the operator panel Lasdpfx Aevga Aysh Ask - "Electronic handwheel" enabling precise positioning on both X and Z servo axes, e.g., for setup operations We also supply machines equipped with Siemens 828D or 840Dsl control systems. Machines available with grinding lengths of 2000 / 2500 / 3000 mm on request.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rabljeni stružnica TOS SUI 50 - 1500 s številnimi dodatki naprodaj Lajdewu Dn Ispfx Ah Ajk Prodamo robusten in natančen stružnica TOS SUI 50 - 1500 – idealen za delavnice, obdelavo kovin in izkušene mojstre. 🔹 Razdalja med konicami: 1500 mm 🔹 Premer struženja nad posteljo: 500 mm 🔹 Hitrost vretena: 14 – 2240 vrt/min 🔹 Vrtina vretena: 56 mm 🔹 Dimenzije (DxŠxV): 3000 x 1300 x 1500 mm 🔹 Teža: približno 2,9 tone ✅ Stroj je rabljen, a tehnično v dobrem stanju in takoj pripravljen za uporabo. 📍 Lokacija: Werdau 📅 Možen ogled – preprosto se dogovorite za termin! Za več informacij pišite ali pokličite.

Stanje: pripravljen za uporabo (rabljen), TOS STROJ ZA REZANJE ZOBNIKOV FO16 maks. premer kolesa 1600 mm širina zobnika 560 mm maks. modul 16 maks. teža obdelovanca 7000 kg površina mize 1350 mm območje vrtljajev mize 16 – 80 o/min pomiki – aksialno 0,05 – 1,5 mm/min pomiki – radialno 0,25 – 6 mm/min pomiki – tangentno 0,13 – 4 mm/min elektrika – napetost/frekvenca 380/50 V/Hz skupna potreba po moči 12 kW teža stroja cca 18,5 t dimenzije stroja cca 4,3 x 2,0 x 3,2 m Ledpjxwl R Tefx Ah Aeak Stroj ima še eno glavo, menjalna kolesa in vretena Na voljo je video z delovanjem stroja pod obremenitvijo

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12473, potovalna razdalja osi X: 2.995 mm, pomik osi Y: 800 mm, pomik po osi Z: 795 mm, največja hitrost vretena: 2.000 obr/min, The scope of delivery includes 15 ISO 50 tool holders for various applications, 1 rotary table, and 2 machine vices, as shown in the images. TECHNICAL DETAILS Travel X-axis: 2,995 mm Travel Y-axis: 800 mm Travel Z-axis: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Lsdewkqa Aopfx Ah Ajak Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min MACHINE DETAILS Installation dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Stanje: rabljeno, Leto izdelave: 1997, Krmiljenje Heidenhain 355 X-hod 850 mm Y-hod 550 mm Z-hod 450 mm Vpenjalo orodja SK50 Teža stroja cca 5,5 t +++++ Ledpfx Aod N Smhsh Aoak Upoštevajte, da je stroj v razstavljenem in za nakladanje pripravljenem stanju. Zaradi tega demonstracija pod napetostjo ali izdelava videa nista možni. Naš oglas vsebuje najbolj reprezentativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, teža obdelovanca (maks.): 300 kg, dolžina brušenja: 2.000 mm, Used cylindrical grinding machine TOS BHU 32A/2000, grinding diameter 320 mm, grinding length 2,000 mm, without electrical components, in need of repair, ideal for companies specializing in complete overhauls. Laodpfxowbiw Ij Ah Ask

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 800 mm, vrsta nastavitve višine: električni, skupna masa: 1.600 kg, višina skobljanja: 200 mm, število rezil rezkalnika: 4, Oprema: motorna zavora, Year of manufacture: 1994 Planing width: 800 mm Max. planing height: 200 mm Number of knives: 4 Min. workpiece length: 500 mm Min. planing height: 5 mm Spindle speed: 4,500 rpm Table length: 1,100 mm Number of outfeed rollers: 1 Main motor: 11 kW Max. feed speed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Segmented pressure roller: Yes Electric height adjustment: Yes Cutter block: Centrifugal cutter block Centrifugal cutter block: Tersa Outfeed transport: Steel roller Lajdpswma N Sefx Ah Ask Total power connection: 16 kW Approx. weight: 1,600 kg Space requirement length: 1.2 m Space requirement width: 1.65 m Space requirement height: 1.8 m

Stanje: dober (rabljeno), Delovna širina skobljanja, mm 510 Največja višina pri dvostranskem skobljanju, mm 200 Laedexvfwkspfx Ah Ask Največja višina pri štiristranskem skobljanju, mm 150 Spodnja skobeljna gred s 4 noži, elektromotor 5,5 kW Zgornja skobeljna gred s 4 noži, elektromotor 7,5 kW Premer desnega vretena 40 mm, elektromotor 4 kW Premer levega vretena 40 mm, elektromotor 4 kW Električna nastavitev višine / širine

Stanje: dober (rabljeno), Leto izdelave: 2004, Ref. št.: 10520 Proizvajalec: TOS VARNSDORF Tip: WHNQ 13 CNC Leto izdelave: 2004 Vrsta krmiljenja: CNC Krmiljenje: HEIDENHAIN TNC 430 Lokacija skladišča: Halberstadt Država izvora: Češka republika Št. stroja: 23XX X-hod: 3.500 mm Y-hod: 2.500 mm Z-hod: 1.250 mm Lodpow Nmw Hefx Ah Aoak W-os: 800 mm Obremenitev mize: 12.500 kg Pritrdilna površina: 1.800 x 2.500 mm Vpenjalni sistem orodja: SK 50 Orodni magazin: 60 kosov Hitrost vretena: 3.000 obr/min Maks. navor: 3.323 Nm Hitri pomiki X/Y/Z: 10.000 mm/min Pogonska moč vretena: 37 / 1.500 kW Teža stroja pribl.: 40 t Dodatne informacije: - Orodja in dodatki - Kotna glava - Kot do 2,5 m - Transporter za odrezke - 3D merilna tipala - Vpenjalna sredstva Stroj je še vedno v proizvodnji in si ga je možno po dogovoru ogledati pod napetostjo.

Stanje: rabljeno, Leto izdelave: 1959, Swing over bed 380 mm Swing over cross slide 215 mm Turning length 1000 mm Machine weight approx. 1800 kg Space required approx. 2.7 x 1.2 x 1 m Laodpfsvwgmajx Ah Aek The L&Z lathe is in good condition. Scope of delivery includes extensive accessories and cabinets: - 3-jaw chuck - 4-jaw faceplate - Steady rest

Stanje: rabljeno, Leto izdelave: 1988, Heidenhain 355 CNC control SK50 spindle taper Machine weight approx. 8 t Laodpfof Tdvbox Ah Aok +++++ Please note that the machine is currently dismantled and prepared for loading. For this reason, a powered-up demonstration or the production of a video is not possible. Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, it is not possible to provide additional images. +++++

Stanje: dober (rabljeno), Leto izdelave: 2013, Ref. No.: 10484 Manufacturer: TOS VARNSDORF Model: WHN 13 CNC Year of manufacture: 2013 Control type: CNC Control system: HEIDENHAIN 530 Location: Halberstadt Country of origin: Czech Republic X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm W-axis: 800 mm B-axis: 360° Table load capacity: 15,000 kg Tool holder: SK 50 Rotational speed: 1,400 rpm Lsdpfow Iu Nhjx Ah Aoak Spindle speed: 2,000 rpm Additional information: The control system was retrofitted in 2013 to a HEIDENHAIN 530i. All drives were upgraded to digital. The tower thrust bearing was also replaced in 2013. Accessories: 3D probe – Heidenhain, large spindle support Auxiliary table dimensions: 3,850 x 900 mm 1x Heidenhain axis module (completely overhauled), 1 new axis module is installed in the machine. Newly packaged spare parts, machine guards. All bearings on the machine have been replaced in recent years. Tools and face milling heads are available. The machine is from first ownership. It remains powered on and in operation. The machine can be inspected by appointment.