Tehtanje Sistem nakup rabljenega (16.098)

Stanje: zelo dobro (rabljeno), RMS vibration exciter with power amplifier and cooling fan We offer you an RMS vibration exciter with power amplifier. Kjdpfegkafiox Adisdw Vibration Exciter SW 1507 Max. force: 2,158 N Max. velocity: 1.3 m/s Power Amplifier TGA 1500 3 x 380V / 50Hz / 35A / 8 kVA Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data. All information is non-binding!) If you have further questions, we will be happy to answer them by phone. Written orders can be placed via email or fax.

Stanje: rabljeno, LDS Type: V875 Shaker System V875-440 with Amplifier SPA40K Vibration Exciter for Medium Forces Technical Specifications: Head Expander: 850 x 850 mm Kdsdpfx Adsuxcpweijw Armature Size: 440 mm Sine Force Vector: 35.6 kN (peak) Random Force Vector: 35.6 kN (RMS) Shock Force Vector: 106.75 kN (peak) Frequency Range: 5 to 3000 Hz Maximum Specimen Mass: 600 kg Maximum Acceleration: 1078.7 m/s² Maximum Velocity: 1.8 m/s Condition: used Weights: Shaker: approx. 2200 kg Blower: 181 kg Amplifier: 622 kg Scope of delivery: (see pictures) (Specifications and information subject to changes and errors!) If you have further questions, we will be happy to answer them by phone.

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Installed Tunings: 1 Typical Tuning: Fast-Vector-Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Max. Positioning Resolution*: 18 Bit for XY, 16 Bit for Z* Non-Linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Kdjdpfx Adoxp Iw Heiow Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital control card Interface Options: Digital SL2-100 Advanced Diagnostic Options: Yes (iDRIVE) Supply Voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Enclosure Versions: Scan head Connector Positions: Opposite to beam exit Weight without Lens (Standard Housing): 35 kg Dimensions (L x W x H, Standard Housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam Offset: 72.72 mm Additional Equipment Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25°C ± 10°C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. Specifications may vary!) Shipping & Pickup: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Horiba Here we offer you a Horiba exhaust gas analysis system Mexa 7100D. Including JAG-10-000-061 gas cylinder trolley approx. 1200 x 1064 x 802 mm and OVN-724A Suitable for: - Stationary exhaust gas measurement before/after exhaust aftertreatment - Assessment of exhaust aftertreatment systems - Modal analysis (dynamic or transient analysis) during non-steady state operations Analyzer for CO/CO2 (HC, NO, N2O, SO2), O2, THC Kdedpfxjgkglxo Adijw 200 operating hours Weight: 620 kg Year of manufacture: 2016 Model: Mexa 7100D Condition: used Collection from site Scope of delivery: (see picture) (Subject to change and errors in technical data. Information is provided without liability!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Sentek Type: L1024m with PA115 Technical Specifications: - Sine Max (kgf / N): 1,000 / 9,810 - Random Force rms (kgf / N): 1,000 / 9,810 - Shock Force (6 ms) kgf: 2,000 / 19,620 - Usable Frequency Range Hz: 5–3,500 - Continuous Displacement pk-pk mm: 51 - Shock Displacement pk-pk mm: 51 - Max Velocity m/s: 2 Kodpfxsr A Ezzs Adisdw - Max Acceleration Sine Peak m/s²: 980 Shaker: - Shaker Head Diameter mm: 240 - Bolt Pattern PCD mm plus 1 in center: 8–100 / 8–200 - Thread M10 - Resonant Frequency ±5% Hz: 3,050 - Max Payload kg: 200 - Eigenfrequency of Shear Axis Hz: < 5 - Stray Flux Density Gauss: < 10 - Weight kg: 1,150 - Dimensions (W x D x H) mm: 884 x 890 x 841 Amplifier: - Dimensions (W x D x H) mm: 580 x 850 x 1,800 - Amplifier Weight Uncrated kg: 290 Cooler: - Type: VAPE500/P2 - Dimensions (W x D x H) mm: 620 x 710 x 1,120 - Weight kg: 120 Total Weight approx.: 1,540 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors. All information is non-binding!) If you have further questions, we are happy to answer them by phone.

Stanje: dober (rabljeno), Keyence Model: VR-6200 + VR-6000 Technical Data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel: 278 mm × 134 mm Z travel: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Imaging device: 4-megapixel CMOS, monochrome Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 μm *1 With image stitching in Z 1.0 μm *1 Measurement accuracy Without image stitching in Z ±2.5 μm *1 With image stitching in Z ±4.0 μm *1 Only 50 operating hours! Kedpfor Dby Ijx Adiedw Includes software CD, without PC! Condition: (like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As illustrated!) (Specifications subject to change and errors excepted!) Should you have any questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), MDS Type: MDS A220-PD MDS A220-PD “Autoriv” manual workstation The A220-PD assembly system is a stationary manual workstation for processing press-in fasteners. Intended use: The machine is designed for pressing in fastening elements. The operator manually inserts the appropriate screws, plastic nuts, and the component to be processed into the machine. The operator then initiates the pressing process using a foot pedal. The pressing cycle runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in stud, punch stud / rivet stud Thread sizes: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not pre-wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Processed, water-free, and oil-free air Kodpfstgik Rex Adiodw Connection: 1⁄2'' thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values refer to a working height (WH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Version: Manufacturer FESTO Control unit: Standard: Manufacturer B&R Version: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: Operating modes can be changed via the control panel. Automatic mode: Press-in of fastening elements takes place in automatic mode. Movements are only triggered when the operator presses the foot pedal, initiating the pressing cycle. Manual mode: In manual mode, setup operations are performed on the machine. Movements can be triggered individually in this mode. Weight: approx. 600 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Stanje: rabljeno, Tehnični podatki (tip/proizvajalec – brez garancije): Kdedpfx Adextdl Isiow Vrhunska moč: »po podatkih proizvajalca« v območju ≈ 10 kN Največje pospeševanje: »do pribl. 1.000 m/s²« Največja hitrost: »tipično v območju pribl. 1 m/s do nekaj m/s« Komponente: Krmilna omara TGA 022/3 Vzbujevalnik nihanja SW 6507 Ojačevalnik moči TG D 9000-000.00 Ventilator Stanje: rabljeno Obseg dobave: vibracijski preizkusni sistem, kot je prikazano (Spremembe in napake v tehničnih podatkih in navedbah so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Here we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Condition: used Kodpfx Adsd Huqheiodw Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Stanje: rabljeno, LDS Type: V875 Shaker System V875-440 LPT600C with SPA40K Amplifier Vibration Exciter for Medium Forces Technical Data: Armature Size: 440 mm Head Expander: 850 x 850 mm Sine Force Vector: 35.6 kN (peak) Random Force Vector: 35.6 kN (RMS) Shock Force Vector: 106.75 kN (peak) Frequency Range: 5 to 3000 Hz Maximum Specimen Mass: 600 kg Maximum Acceleration: 1078.7 m/s² Maximum Velocity: 1.8 m/s Displacement: ±25.4 mm Vibration Test Modes: - Sine - Random - Shock Amplifier: SPA40 Slip Table: Dimensions (W x H x D): 1400 mm x 1250 mm x 2200 mm Working Surface: 600 mm x 600 mm Plate Thickness: 37 mm Plate Weight: 27.4 kg Max Load Capacity: 500 kg Condition: used Kdsdpfxsuxcugj Adiew Weight: - Shaker approx. 2200 kg - Blower 181 kg - Amplifier: 622 kg - Slip Table: 4760 kg Scope of Delivery: (See photos) (Subject to change and errors in technical data. All information is provided without guarantee.) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a 3DMICROMAC laser marking system. microCUT Enclosure Laser source: IPG Raylase 3-axis scan system Power meter 1 Power meter 2 Camera system for positioning Camera system for quality inspection Chiller Exhaust system Control cabinet with industrial PCs Coolant distribution unit Machine dimensions: Machine weight: 2 tons Width: 922 mm, Depth: 4653 mm, Height: 2925 mm Components: Exhaust system: Height 2869 mm, Width 760 mm, Depth 1577 mm Chiller: Height 1697 mm, Width 1440 mm, Depth 860 mm, Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm, Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current 74A Frequency 50/60Hz Power input 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC, Frequency 50/60Hz, Power 16.7 kW, Current 59A Chiller: Mains voltage 400V, Frequency 50/60Hz, Current 40A Machine operating fluids: Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solids: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Kedpfxofgbt Ej Adijdw Dew point 3°C Consumption < 120 l/min Chilled water cooling module: Chilled water outlet temperature 21°C Chilled water return temperature 26°C Setpoint tolerance 1K Chilled water flow rate 69 l/min Available pump head 1.5 bar DI water cooling module: DI water outlet temperature 26°C DI water return temperature 31°C Setpoint tolerance 1K Flow rate 10 l/min Available pump head 1.5 bar Laser source manufacturer: IPG, Type: YLS-5000, Modes: CW, Quasi-CW Wavelength: 1070nm Power: 5kW Frequency: 5 kHz Scanner manufacturer: Raylase AG, Type: Axialscan-30-Y Field size: 1000x1000 mm Spot diameter: 87 1/e²(µm) Resolution: < 31 µm Working distance: 1198 mm Chiller: Manufacturer Riedel, Type: PC 250.01-NZ-DI-S Refrigerant: R407C 50 Hz Net cooling capacity: 38 kW 60 Hz Net cooling capacity: 40.3 kW Camera system: Manufacturer e2V, Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v, Type: DiViiNA LM1 CL Extraction unit: Manufacturer Donaldson Filtration, Type: DOWNFLO Oval 3-3 Max. fan speed: 3000 rpm Operating pressure: 4.2 bar Pulse duration: 100 ms Pressure vessel volume: 92 l Type: Laser Marking System microCUT Condition: used Scope of delivery: (see pictures) (Technical data subject to change. Errors and omissions excepted!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), EFD Model: MINAC 6/10 SM Heat Treatment The compact design of the Minac induction heating system allows for easy installation and provides rapid, concentrated and controlled heating with full repeatability. Medium Frequency Product Range Technical specifications: Maximum output power: 10 kW Continuous output power: 6 kW Mains voltage: 400–480 V Frequency range: 10–25 kHz Adjustable output power: 2–100% Recommended main fuse: 16 A Cooling water: approx. 4 l/min Cooling water flow temperature min./max.: 18–35°C Cooling water pressure min./max.: 4–6 bar Weight: approx. 50 kg Dimensions (W x D x H): 345 x 708 x 453 mm Year of manufacture: 2018 Optris CTlaser Infrared Thermometer Model: 3ML Measurement range: 50 to 400°C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature controller ECU 1214C Kodpfx Ast Din Aodiedw Hyfra eChilly water chiller 4-S Cooling capacity: 4395W The device comes from a laboratory environment. Only a few operating hours. Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) For further questions, we would be glad to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a screwing system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Kdodpfeqa A Ulsx Adiow Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) We are happy to answer any further questions by phone. Orders in writing are possible via email or fax.

Stanje: zelo dobro (rabljeno), RS Simulators Type: ST2K320/45 Water-Cooled Shock Test System Operating Climate Range Temperatures in Upper Test Chamber: Temperature range: +40 °C to +180 °C Temperatures in Lower Test Chamber: Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Kdedpfx Adstqcu Eeisw Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A / 2.5 kg Weight (Chamber): approx. 850 kg For your security as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data, all information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Ifsys Type: 114100 Model: VL 13 Screw Feeding System Hopper system with 2x Vibroliner and 2x Vibro hopper Kdsdpjciqi Nofx Adiew 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted) For any further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System Here we offer an Eos EOSINT Plastic Laser Sintering System. Eos EOSINT Plastic Laser Sinter System P385 The following items are included with the EOS P385 system: Kjdpfx Aef Ey Easdiodw Build chamber Powder container Chiller: Termo TEK Termochiller 1100 The following upgrades have already been carried out: Software: CDs for Eosint P3 Process Software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser replacement on 15.05.2008 X drive motor: used motor replaced on 04.05.2020 Pyrometer replaced on 30.06.2020 Build volume: 350mm x 350mm x 610mm Voltage: 3/N/PE/400V, frequency 50 Hz Connection value: 8 kW, fuse protection 32 A Max. laser power: 100 W, laser class open: 4 Laser class closed: 1 Weight: 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we would be happy to answer them by phone.

Leto izdelave: 2012, Stanje: dober (rabljeno), Lot of inos iSENS laser sensors with control unit, cables, and PC interface. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; all information provided without liability!) For further questions, please feel free to contact us by phone. Kdedeb D H Huopfx Adisw

Stanje: zelo dobro (rabljeno), Here we offer a Millipore water purification system Elix 3. Purifies 3 liters of water per hour Condition: used Scope of delivery: (see image) (Specifications and technical details subject to change and errors excepted!) If you have any further questions, we will be happy to assist you by phone. Kedpfx Aeq Ebi Nsdijdw

Stanje: dober (rabljeno), Heinzinger Type: ERS 600-500/160 Description: Battery Module Tester High-dynamic Test Bench Power System Bidirectional DC power supply unit with active energy recovery, liquid-cooled Voltage [max]: 20 - 600 V adjustable Per channel current [max]: ± 500 A adjustable System power [max]: ± 250,000 W Mains connection (3/N/PE): 3x400V ±10% 47 ... 63Hz Software: Battery simulation software for load-change-optimized control Dimensions (W/H/D): 2400/2330/800 mm Ksdpfx Ajq Nzwhsdiedw Condition: used Scope of delivery: (see photo) (Technical data and information subject to change and error!) If you have any further questions, we are happy to answer them by phone.

Stanje: rabljeno, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Includes PC, Software & Technical Documentation For sale is a professional battery test system, comprised of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit Kodpsxuqk Hefx Adiedw - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: Feature / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year of manufacture: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Functions: Charging, discharging, cycling of battery modules Condition: Excellent, laboratory use Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Feature / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year of manufacture: 2019 Weight: approx. 1225 kg Temperature range: −70°C to +180°C Humidity range: 10–98% RH Refrigerants: R449A + R23 Pressure range (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE certification present Internal chamber dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Functions: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10%, 50 Hz, full load 54 A Maximum power input: 32.5 kW Monitoring / Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured parameters: cell voltage, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation Industrial PC with control and measurement software Enables automated test routines, logging, and data analysis Overall System Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni chamber 1.6 × 2.3 × 3.3 m 1225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1975 kg Applications: - Development, testing, and lifecycle evaluation of battery modules (e.g., Li-Ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation of temperature and humidity - Research, industrial, and academic laboratories Important Note: “The table shown in the photos is not included in the sale.” Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / sampling unit - Control PC with software - Technical documents and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to provide support via phone.

Stanje: zelo dobro (rabljeno), pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes using ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and complies with the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: - Precise temperature and humidity control - Weather station (p, t, h) for buoyancy correction - Dew point mirror (optional) - Vibration-damped granite for low-vibration installation of an ultra-microbalance - Ionization device against static charge - Airflow protection for shielding the weigh cell - Touch panel for intuitive operation - Ethernet interface for process data exchange - Interior with sockets, grounding bolts Advantages: - Fulfills regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) - Tested, ready-to-connect unit Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% r.H. ± 3% Dimensions (W/D/H): 1,800/800/1,980 mm Kodpjlddmzefx Adiodw Cleanroom class 5 (ISO14644-1) Power supply: 400 V, 15 A, 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a plasma stripping system. Plasma stripping system, ab solut Plasma unit for stripping DLC coatings Vacuum chamber 200 x 200 x 200 mm Kedpfjdz Achsx Adisdw Microprocessor control for gas mixtures PC module (industrial PC) and printer for process documentation Vacuum pump, Alcatel model ACP 28 Type: As 200 DLC Condition: used Scope of supply: (see photo) (Subject to changes and errors in the technical specifications and information!) If you have any further questions, we will be happy to answer them by phone. Written orders are possible via email or fax.

Stanje: zelo dobro (rabljeno), We are offering an ICS system here. Kdedpfxjhh Ibtj Adiow Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1 % Flow rate precision: < 0.1 % Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analytical mode only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lbs.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: - ICS-5000 plus Dual Pump - 6-port valve MXP9900-000 - AFC-3000 Automated Fraction Collector - RFC-10 Controller Condition: used Scope of delivery: (See pictured items) (Subject to changes and errors in technical details and specifications!) If you have further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), LDS Type: V824 + Tira slip table + SPA30K Vibration exciter for medium force applications Technical Data: Sinusoidal force vector: 26.689 kN (peak) Random force vector: 25.355 kN (RMS) Half-sine force vector: 53.376 kN Moving element mass: 21.55 kg Frequency range: d.c. – 3200 Hz Max. sinusoidal acceleration: 981 m/s² Max. random acceleration: 50 gn rms Max. velocity: 1.78 m/s Displacement: ±12.7 mm Slip Table: W x H x D: approx. 1650 mm x 925 mm x 2450 mm Working surface: 991 mm x 991 mm Usable frequency range: 0 to 2000 Hz Table thickness: 50 mm Kdodpeuzf R Asfx Adiew Table weight: 94 kg Max. payload: 2200 kg Condition: used Weight: Shaker approx. 1725 kg Slip table approx. 3500 kg Scope of delivery: (see images) Total weight approx. 5300 kg (Specifications and data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you an Iridex laser system OcuLight TX. IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system may result in undesired side effects. Kdodpfxenp Icaj Adijw OcuLight TX Ophthalmology: - Retinal photocoagulation - Laser trabeculoplasty - Iridotomy - Iridoplasty Otolaryngology: - Stapedectomy - Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser - Excellent efficiency with a powerful 2500 mW of deliverable laser energy enables pulse durations and intervals from 10 to 3000 ms - Offers TrueCW laser pulses for maximum control and precision - Flexible range of delivery devices and wide selection of handpieces for various surgical procedures - Optional remote control and wireless footswitch to reduce clutter and improve ergonomics and control - Quiet operation eliminates distractions - Lightweight and portable design allows easy transport between treatment rooms and offices IRIDEX OcuLight TX Green 532 nm Laser - Green treatment laser: 532 nm - Aiming laser: nominal 632 nm - Cooling: on-demand whisper fan - 10–3000 ms exposure duration and repetition interval - Compatible with EndoProbe, LIO, OtoProbe and SLA - Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW - Weight: 6.4 kg - Length: 15 mm - Width: 30 mm - Height: 30 mm - Type: IRIDEX OcuLight TX - Condition: used - Scope of delivery: (see picture) (Technical data and specifications subject to change and errors!) For further questions, we are happy to answer by phone.