Stroj Swm nakup rabljenega (26.299)

Stanje: dober (rabljeno), A Nicholson A7/22" is being offered for sale. The machine can be purchased either in its current condition or fully overhauled. Drive motors are included in the offer. Nsdpfx Abot Tdvyobecl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 55 mm, največja debelina roba: 12 mm, vrsta nastavitve višine: pnevmatičen, nastavitev nagiba žaginega lista: 10 °, Ponujamo zelo dobro ohranjeno robno lepilko HOLZ-HER SPRINT 1310, letnik 2005, vključno z Ott Rondomat. Proizvajalec: HOLZ-HER Model: SPRINT 1310 Letnik: 2005 Prodam servisirano robno lepilko Holz-Her Sprint 1310 Popolnoma delujoča! Težka izvedba – debelina robu 0,4–12 mm Krmiljenje preko SPS zaslona Popolnoma avtomatski magazin za robni trak v rolah in trakovih Lepilna postaja za vložke + PU lepljenje avtomatska tipalna šoba Višina obdelovanca 6–55 mm Krajšalna enota nastavljiv nagib žage od 0–10° Rezkalna enota, poravnalno rezkanje do 12 mm, profilno rezkanje Strgalna enota za posnetje in radije z dvema pnevmatskima nosilcema strgal Enota za površinsko strganje – finiš Nodpfx Aoycgabebbjcl Vključno z Ott Rondomat za obdelavo robov

Stanje: zelo dobro (rabljeno), Brusilni stroj za nože do 650 mm MVM model BM650 Njdsycdbcjpfx Abbscl

Stanje: zelo dobro (rabljeno), Brusilni stroj za svedre od 10 do 82 mm CUOGHI model APE 80 Ncsdjycc Unspfx Abbsl

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Lisec pralni stroj za steklo RTL-25VN, letnik 2007, smer dela levo/desno, s 6 ščetkami za Low-E steklo, vključno z 1 rezervoarjem za toplo vodo, 1 peskolovom in 1 puhalnikom. Stroj je dobavljen s transportnim trakom za vstop RTVN-32/25WE (dolžina 3,2 m) in transportnim trakom za izstop RTVN-16/25ST (dolžina 1,6 m). Ščetke so odvisno od proizvodnje še vsaj 1-2 leti uporabne. Stroj je bil uporabljen le v manjši proizvodnji. Ker ima nekaj rje, ga lahko ponudimo po ugodni ceni. Stroj bo na voljo konec februarja 2026 iz našega skladišča v Hofkirchnu/Avstrija. Nedpfsyc Utvox Abbscl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 900 h, Rezkalni stroj Lectra IQ80, letnik 2018, največja debelina reza 8 cm, uporabna širina 180 cm, 900 delovnih ur. Stroj je v odličnem stanju. Nedpfxsycqcte Abbecl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 600 h, Rezalni stroj Lectra Q25, leto 2018, največja debelina reza 2,5 cm, uporabna širina 170 cm, delovnih ur: 600. Stroj v odličnem stanju. Ncjdpsycp Syefx Abbjl

Stanje: rabljeno, Navojni stroj, stroj za navoj na cevi, Ridgid 300, rabljeni stroj Proizvajalec: Ridgid Tip: 300 Skupne dimenzije: Širina: 1180 mm Globina: 1250 mm Višina: 1500 mm Ncsdsybbamjpfx Abbsl Električni podatki: 230V Funkcije: rezanje navojev, rezanje na dolžino, odstranjevanje ostrin

Stanje: pripravljen za uporabo (rabljen), Radialbohrmaschine, Kovosvit VO 50, Gebrauchtmaschine Hersteller: Kovosvit (Tschechische Republik) Modell: VO 50 Ausladung (Säulenabstand): 1.250 mm Njdpfx Absw Hanhobscl Bohren in Stahl: max. 50 mm Bohren in Guss: max. 60 mm Spindelhub: 310 mm Spindelaufnahme: Morsekegel MK-5 Drehzahlbereich: 28–2.500 U/min Vorschubbereich: 0,05–2 mm/U Motorleistung: 4 kW Installierte Leistung: 6 kVA Maschinenabmessungen (LxBxH): 3.120 x 1.030 x 2.750 mm Gewicht: ca. 4.200 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, širina kolesa: 800 mm, module 1-6 diameter max 600mm digital reading Nsdpsxhck Sjfx Abbecl Complete machine with documentation, tool holders, change gears,...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec laserskih virov: MAX Photonics, laserska moč: 1.500 W, valovna dolžina laserja: 1.080 nm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, maks. debelina aluminijaste pločevine: 5 mm, maks. debelina medeninaste pločevine: 4 mm, dolžina mize: 600 mm, širina mize: 800 mm, potovalna razdalja osi X: 600 mm, pomik osi Y: 800 mm, teža obdelovanca (maks.): 500 kg, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 2.500 kg, skupna dolžina: 3.500 mm, skupna širina: 3.500 mm, skupna višina: 2.300 mm, širina odprtine vrat: 600 mm, višina odprtine vrat: 800 mm, vrsta nastavitve višine: električni, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, kabina, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Laser Cutting Machine with 1.5kW Fiber Laser (New Machine) Our commitment is to provide highly precise, long-term stable, and yet cost-effective laser machines. Our systems are ideal for workshops and repair shops. Included in the scope of delivery are a perfectly developed cutting parameter library as well as first-class service. - Highest precision - Machine bed made of natural stone - Driven by YASKAWA linear motors (with linear guides) - Axes measured and calibrated with Renishaw measuring system (certificate included) - Pneumatic sheet metal clamping - High-precision cutting machine - 1.5 kW laser source from MaxPhotonic - Extremely fine beam diameter (20µm) - Travel path approx. 600 x 800mm - Machine control in German - Includes nesting module - Very easy to operate - Powerful laser chiller - Table support Leasing or hire purchase is available through our financing partner. Ncodpex I D Nxefx Abbol Sale exclusively to commercial customers. Machine dimensions approx.: Width: 190cm Height: 190cm Depth: 180cm Weight: approx. 2500kg

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 28.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 420 mm, pomik osi Y: 330 mm, pomik po osi Z: 240 mm, največja hitrost vretena: 5.000 obr/min, VMC 300 krmilnik Siemens 810D SK40 12 orodnih mest v dobrem stanju Nodewlpb Uopfx Abbecl popolnoma delujoč

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE We are selling our as-new Drechselmeister MIDI 1 woodturning lathe with a centre distance of 400 mm. The ex-demonstration machine is in its original condition, therefore you receive the full warranty. Technical Data Ncsdpfx Astpn Nlebbel - Centre height approx. 178 mm / Swing over bed 355 mm - Centre distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / Infinitely variable speeds: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove* - Tailstock with MK2 quill (50 mm travel with graduated scale!) - Motor 0.7 kW / 1 hp (230 V) with frequency inverter - Weight approx. 43 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping rates: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, wood lathe, turning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: dober (rabljeno), Leto izdelave: 2005, Used fabric cutting machine Lectra Vector 2500 V3 Fashion, year 2005 – 7,100 working hours – cutting window useful width 170 cm – cutting thickness 2.5 cm – new computer installed with Windows 10, 4,000 hour maintenance kit performed 1 year ago – in good condition. Immediately available. Price: €22,000.00 Ncodpfet Ipk Sjx Abbol

Stanje: dober (rabljeno), Leto izdelave: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 – year 2005 – effective cutting width 180 cm – traversing – new inverter device – in good condition. Ncjdpsrtnccefx Abbjl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Machine on display. Optimill F 310 HSC Premium CNC Milling Machine direct from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail with roller circulation in all axes for high load capacities • High-torque servo drives, direct to the ballscrews in all three axes • Precision-ground, preloaded high-performance ballscrews for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precise milling table with five T-slots, large dimensions and precision-ground • The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Tool changer with 30-tool dual-arm gripper • Coolant system with chip-flushing setup and cleaning gun • Internal spindle coolant 20 bar • Band-type chip conveyor provides efficient chip removal Ncjdpfx Aboycqf Ujbsl • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: warranty on material defects and free OSS Plus online/on-site service • 1-year Basic maintenance contract included in DE/AT/CH • Control • 15.6" color display • 16:9 format • Complete Package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Manage network drive • 3D simulation • Trace function • Equipment Details • Inline spindle • Tool holder SK 40 / DIN 69871 • Spindle speed 12,000 rpm • Dimensions and Weights • Length: approx. 4319 mm • Width/Depth: approx. 2300 mm • Height: approx. 3000 mm • Weight: approx. 7000 kg • Rapid Traverse Speed • X-axis: 30 m/min • Y-axis: 30 m/min • Z-axis: 30 m/min • Electrical Data • Connection voltage: 400 V • Mains frequency: 50 Hz • Electrical connection • Total connected load: 56 kVA • Horizontal Milling Table • Length: 1200 mm • Width: 600 mm • T-slot size: 16 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel • X-axis automatic: 1050 mm • Y-axis automatic: 600 mm • Z-axis automatic: 600 mm • Vertical Spindle • Spindle taper: SK 40 DIN 69871 • Speed range: 12,000 rpm • Main drive motor continuous operation S1: 20 kW • Main drive motor S6-30% operation: 50.3 kW • Main drive motor torque continuous S1: 96 Nm • Torque at 30% duty cycle S6: 240 Nm • Feed Force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 10 kN • Feed Motor Torque • X-axis continuous S1: 18 Nm • Y-axis continuous S1: 18 Nm • Z-axis continuous S1: 27 Nm • Tool Changer • Double arm gripper • Number of tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 s

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.500 mm, skupna širina: 2.900 mm, skupna višina: 3.000 mm, vrsta vhodnega toka: trifazni, This machine is suitable for apple processing. It may be used for slicing apples into RING SLICES, with CORING. The machine dose not peel the apples. We sell the apple slicing machine together with the coresponding feeding tank. It is therefore perfectly suitable for preparing fruit for the drying industry, for the confectionery and baking industry, for fresh fruit salads, for the snacks industry or for fruit preserves. Apple are automatically fed, singulated in the loading area and then transferred onto the stainless steel conveyor equipped with an automatic orienting system, allowing automatic fruit alignment inside the tray hollows. In the slicing section, a sharp and precise cut, which does not affect organoleptic qualities, guarantees maximum hygiene and healthy products. Here, fruit is sliced into RINGS andCORED by means of interchangeable cutting units that allow varying slicing dimensions and coring diameter. Sliced fruit are discharged on a belt conveyor. Cores fall underneath the working surface where a conveying belt, not included in the supply, may be installed to carry them out of the machine and discharge them into a collecting container. All safety guards may be easily removed thanks to quickly releasable interlocked hinges. This allows easy, quick and safe maintenance as well as thorough cleaning. Ncjdpfx Aex Tr Imebbsl

Stanje: rabljeno, Leto izdelave: 2014, proizvajalec krmilnikov: Sonstige, model krmilnika: Beckhoff TwinCAT CNC, Opis: Pomiki Nodpfsycngcjx Abbscl X-os: 3.060 mm Y-os: 1.540 mm Z-os: 100 mm Laser Laserski izvor: 4 kW IPG, nova modula prejeta leta 2024 Rezalka glava: zamenjana 2024 Mehanika & zmogljivost Hitrost rezanja: do 150 m/min Hitrost pozicioniranja: do 350 m/min Pospešek: 6 G Pogonske osi: linearne Odsesavanje Sistem za odsesavanje: Donaldson Dimenzije & teža Dimenzije stroja (D × Š × V): 10.000 × 3.080 × 3.060 mm Teža: cca 18 t Oprema Vzdolžni trak za odstranjevanje odpadkov: prisoten Največje debeline reza Mehko jeklo: 20 mm Nerjavno jeklo: 20 mm Aluminij: 15 mm Medenina: 8 mm Baker: 6 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 50 kg, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, dolžina obdelovanca (maks.): 2.500 mm, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Ncodpfjx Ezz Hox Abbjl Maximum workpiece weight: 50 kg Edging material (coil stock) - material thickness: 0.4 - 3 mm Maximum edge cross-section (plastic): 135 mm Maximum edge cross-section (veneer): 100 mm Maximum coil diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edge up to 3 mm Cross-processing speed: up to 30 m/min for panel sizing Cross-processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separation agent spraying unit A3 gluing station with 2 rollers FF12 profile milling unit top/bottom, motors 12,000 rpm FA11 finishing unit top/bottom Continuously adjustable stop cams with max. cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Stanje: novo, Leto izdelave: 2026, Kot upogiba (maks.): 145 °, moč: 3 kW (4,08 KM), Oprema: dokumentacija / priročnik, Dolga upogibna stiskalnica (HKS-E 6m Easy) z avtomatskimi škarjami, 5-palčnim zaslonom na dotik ter enostavnim ročnim in avtomatskim upogibanjem prek preprostega programiranja. S kapaciteto shranjevanja do 40 programov. Jmkfvjpw Delovna dolžina: 6.100 mm Dolžina stroja: 7.000 mm Delovna globina: 1.050 mm Ncodporul A Ajfx Abbol Debelina pločevine: 1,2 mm (Al), 1,0 mm (jeklo) Število stojal: 5 Teža stroja: 2.500 kg Dobavni rok: 3 meseci

Stanje: novo, Leto izdelave: 2026, Hidravlični upogibni stroji (HKS-CNC-Profi) so opremljeni z avtomatskimi škarjami in globinskim omejevalnikom za premikanje pločevine. CNC programska oprema omogoča grafično oblikovanje profilov v različnih oblikah in velikostih. 21,5-palčni LCD zaslon na dotik še dodatno izboljša preglednost programiranja. Njdpfx Abox Uqqcebjcl Delovna dolžina: 6.100 mm Dolžina stroja: 7.200 mm Delovna globina: 1.150 mm Debelina pločevine: 1,5 mm (Al), 1,25 mm (jeklo) Stebri: 6 Teža stroja: 3.600 kg Dobavni rok: na zalogi

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Comandulli Penta Avtomatski stroj za ravne robove s posnetjem Ncjdjycu Aqjpfx Abbol 5 nosilcev za površine 4 nosilci za posnetje Kalibrator Nosilec za vodno kapljanje

Leto izdelave: 1994, Stanje: rabljeno, Linija za obrezovanje / avtomat za obrezovanje / dvojni obrezovalnik z meritvijo in avtomatsko nastavitvijo žaginega lista EWD Esterer Tip: DK90 TL 1000 Leto izdelave: 1994 Največja širina prehoda: 1000 mm Največja višina reza: 120 mm Skupaj 3 fiksne žage 2 nastavljivi žagi Merjenje Combimes S S-transporterjem Ncsdpfx Asyam Iajbbjl S prečno žago S podajalnikom Esterer ARS TR Z dvoplastnim separatorjem ostružkov Lahko po dogovoru tudi popolnoma obnovimo. Stroj je že bil demontiran in je na voljo takoj. Lokacija: Avstrija, blizu Leobna

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €269,588 Laser power: 3 kW Table type: Shuttle table Max. sheet thickness - Mild steel: 16 mm Max. sheet thickness - Stainless steel: 8 mm Max. sheet thickness - Aluminium: 8 mm Max. sheet thickness - Copper: 5 mm Max. sheet thickness - Brass: 8 mm Total connected load: 29.9 kW (with extraction) Cutting area: 6100 x 2070 mm X-axis: 6100 mm Y-axis: 2070 mm Z-axis: 125 mm Max. sheet size: 6096 x 2032 mm Max. sheet weight: 240 kg/m² (for 3 - 12 kW) / 400 kg/m² Max. total weight for double table: 5800 kg (for 3 - 12 kW) / 960 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 42 s The HD-FN is equipped with two tables that are automatically exchanged, enabling simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, providing optimal accessibility for optional loading and unloading systems. Control, laser source and cooling are fully integrated within the system. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinal position for optimal access to optional loading/unloading systems) - Enclosed cutting chamber with protective glazing - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Lantek for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap box - Work area lighting - Multi-chamber extraction system - Light barrier protection for shuttle table - Remote maintenance access - Air conditioning for control cabinet - Equipped according to CE regulations Ncedpfsx U Elnex Abbol ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steel S235 20 25 30 35 40 Stainless steel 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass (CuZn39Pb3) 10 12 20 20 20 OPTIONS: - Extraction with filter unit - Automatic nozzle changer

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €174,688 Leasing rate: €3,301.60 Laser power: 3 kW Nodpfx Ajx U Elhsbbscl Manual table / Shuttle table: Manual table Max. sheet thickness – Mild steel: 16 mm Max. sheet thickness – Stainless steel: 8 mm Max. sheet thickness – Aluminium: 8 mm Max. sheet thickness – Copper: 5 mm Max. sheet thickness – Brass: 8 mm Cutting area: 3060 x 1530 mm X-axis: 3060 mm Y-axis: 1530 mm Z-axis: 140 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 160 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm The HD-FO is our compact entry-level model. Control system, laser source, and chiller are integrated into the machine to keep the overall dimensions as compact as possible. The manually extendable table is moved out laterally for loading and unloading. The cutting head features automatic focus adjustment. This makes the system a particularly economical, fast, and very easy-to-operate production machine. The system includes the following components: - Manual loading and unloading table - Enclosed cutting chamber with protective glass - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Latek for programming and optimized material utilization (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Air conditioning for control cabinet - Equipped in accordance with CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW -----|-----|----- Mild steel S235 | 20 | 25 Stainless steel (304) | 10 | 15 Aluminium (5083) | 12 | 20 Copper | 6 | 10 Brass (CuZn39 Pb3) | 10 | 12 OPTIONS: - Extraction with filter unit - Shuttle table