Seznam Rezervnih Delov nakup rabljenega (21.526)

Stanje: dober (rabljeno), various measurement cards & racks from NI available, see list below: available as complete sets or individual parts photos for reference NI PXI-1045 189105K-01L (2 units) NI PXI-2569 100 SPST Relay Module NI PXI-6528 Isolated Digital I/O NI PXI-4072 6 1/2 digit FlexDMM NI PXI-2532 512-Crosspoint Matrix (2 units) NI PXI-6251 M Series Multifunction DAQ NI PXI-8331 MXI-4 (2 units) NI PXI-6232 M Series Multifunction DAQ (10 units) NI PXI-1031 90871D-01 Rev1.1 NI PXI-8196 Embedded Controller 191435B-712, without ExpressCard NI PXI-6229 M Series Multifunction DAQ 191332B-11 191334A-11 NI PCI-6527 185681D-01 Kjdpfx Adswpgy Ajbsnd NI PCI-GPIB IEEE488.2 188513E-01L SCB-68 182469-01 Terminal Block TBX-68 83420 DAQ Termination Board (3 units) SCXI-1331 184268C-01 Rev. 3.1 (2 units) Cable 188841B-02 SH37F-SH37M-2 (10 units) See also my other measurement and test equipment. We also buy equipment.

Stanje: zelo dobro (rabljeno), SCM Contura in excellent condition. Ksdpfx Ast E T I Nodbsnd

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Basket diameter: 790 mm, usable height: 500 mm, loading height: 930 mm, maximum basket load: 300 kg, fluid volume: 150 l, pump capacity: 1.5 kW, heating element power: 6 kW, machine dimensions (L/W/H): approx. 1200 mm / 1000 mm / 1200 mm, weight: approx. 220 kg. Documentation available. An on-site inspection is possible. Kodpfx Aswg E Aqedbend

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 500 kg, Cleaning system type W150 Basket diameter: 1,500 mm Usable internal height: 950 mm Basket load capacity: 500 kg Suitable for paint preparation and final cleaning with KS Complete stainless steel construction with: - Stainless steel pump with frequency control - Integration of conductivity probe into PLC - Automatic level replenishment - Electric bath heating (indirect) - 2-tank system - Eco-rinse - Three-dimensional impulse air blow-off - Bag filter system Kedpega Dqlsfx Adbjnd - Siemens S7-300 PLC control system with operator panel - Direct drive for the washing basket - Steam extraction/condensate removal - Level control - Chip/particle filter with bath cover plate - Impulse compressed air blow-off including soundproof hood - Oil separator PPT 100 - Discharge device/floor rinsing with draw-off valve - 2 trolley/transport systems

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, Complete system, Centrifuge E 700 H/1, Drum 690/720/600 mm, Drum volume 120 L, Speed 735 rpm, Wall thickness 12 mm, Material GS 45, Max. load 300 kg, Batches/hour 10, Heating 8 kW, Operating voltage 380 V, Knodpfx Ajw Evy Redbsd Total connected load 35 A, Lifting device for loading, Vibration chute for chips and parts Separation drums: 3 pieces with different perforation patterns. Chip conveyor belt to scrap container. System can still be demonstrated under power.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, številka stroja/vozila: 19 2-11 001, Top-loading spray washing system TRA-S 1100 (2-tank) Kodsv D Iyujpfx Adbjnd

Stanje: novo, L'unità di pulizia di tipo rotativo consente la lavorazione dei pezzi direttamente a bordo delle celle di lavoro, evitando costose operazioni di trasporto. Il trasferimento dei componenti avviene tramite un sistema integrato di traslazione rotativa indicizzata, che garantisce il posizionamento satellitare sia durante le fasi di carico/scarico che durante le lavorazioni interne. È possibile ottenere una notevole flessibilità nel cambio di maschere personalizzate per il bloccaggio dei componenti. Eliminazione dei costi di imballaggio e di trasporto. Knjdpfx Adjwdfyqobjd Riconfigurazione dell’impianto in tempi molto ridotti. Il numero di satelliti può essere selezionato in funzione di un ciclo di lavaggio, asciugatura e soffiaggio definito e accurato. Questi impianti sono idonei al trattamento con soluzioni detergenti acquose dei seguenti componenti: Particolari critici lavorati e componenti delicati con fori ciechi e filettati, come: corpi valvola, attuatori automatici, corpi bruciatore, contatori dell'acqua, volani di frizione, valvole del gas, distributori multicanale idraulici e pneumatici, ecc.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, ø 110-450 mm, maximum wall thickness 72 mm Kjdpfot A Ufdsx Adbond Servo-driven steel feed and synchronization. NEW, unused

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19,450, load capacity: 2 x 50 kg per compartment, maximum load unit dimensions (L/W/H): 600 mm / 400 mm / 320 mm, travel speed: 200 m/min, lifting speed: 120 m/min, extraction speed: 100 m/min. On-site inspection possible. Available from approx. Q4 2024. Kedpfxstvgqne Adbend

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Machine body, internal piping system, control cabinet, and wash basket made of stainless steel - Electronically controlled basket drive - Level control - Lid lock - Removable filter plate - Weekly timer function Oil skimmer, version WE AM version for additional manual cleaning - Lid with viewing window, lighting, and gauntlet gloves - Low-pressure pump 3–6 bar with brush washing system and hand-held spray gun - Blow-off gun for compressed air High-pressure unit 160 bar for AM version, permanently installed on machine side Kodpfsf A Nqujx Adbjnd

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 38.650 h, Funkcionalnost: popolnoma funkcionalen, Solvent system, completely overhauled. 3 tanks. Immersion with ultrasound / spraying / vapor degreasing / vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Basket dimensions: 4x T520 x W320 x H200 mm. Filling volume: 1000 L. Ksdpewndu Uefx Adbsnd

Leto izdelave: 2025, Stanje: novo, Dimensions (L x W x H): 1700 x 860 x 850 mm Weight: 190 kg Total power requirement: 1.5 kW Oscillating profile sanding machine OFS-3 - Working height of brush unit: 150 mm - Brush unit equipped with sanding/brush strips - Motor power: 1.5 kW - Infinitely variable speed control: 0 – 1400 rpm - Voltage: 400 V / 50 Hz Knodjvz Hzljpfx Adbed - Sanding lamella dimensions: 150 x 60 mm - Overall dimensions: L=1700, W=860, H=850 mm - Weight: 190 kg OPTIONAL: - Sanding lamella 150 x 60 mm P120 EUR 2.00 / piece - Sanding lamella 150 x 60 mm P150 EUR 2.00 / piece - Sanding lamella 150 x 60 mm P180 EUR 2.00 / piece - Sanding lamella 150 x 60 mm P240 EUR 2.00 / piece - Sanding lamella 150 x 60 mm P320 EUR 2.00 / piece

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, The parts storage unit / selector DepotMini C316 stores small parts in defined batches directly at a Swiss-type automatic lathe. Ideal for storing small parts with a diameter of 1 – 10 mm. Can also be used as a single-part storage unit. Disc diameter: 300 mm Storage capacity: 16 containers Storage volume per container: approx. 0.1 liters Trolley Fixed feed height approx. 82 cm The control system allows for piece count, M-code, or time-based operation, providing maximum flexibility. Controller with magnetic holder Knedpfx Adewv R Iqsbjd Ideal for Swiss-type lathes from manufacturers such as Citizen, Star, Tornos, Traub, Hanwa, among others. The unit operates autonomously and does not require an electrical interface to the lathe.

Leto izdelave: 2017, Stanje: skoraj kot novo (rabljeno), 2-Station Spray Cleaning System: - Lightly used - Sale due to production restructuring - Stations 1 and 2: Spray cleaning - Automatic transport - Two independent tanks - Tank 1 equipped with oil separator - Temperature up to 80°C - Automatic cycle with 4 program blocks - Automatic water management Transport Cart: 1,600 x 850 x 395 mm (L x W x H) Usable dimensions: 1,530 x 830 x 800 mm (L x W x H) Dimensions: Total washing system (machine with loading and unloading stations) 13,800 x 2,000 x 2,420 mm (3,525 mm) (L x W x H / H with superstructure) Loading module 5,000 x 850 (1,140) x 700 mm (L x W x H / W with sensor) Unloading module 5,000 x 850 x 700 mm (L x W x H) Tank frame 2,200 x 1,300 x 1,300 mm (L x W x H) Electrical connection: 3 x 400 V, N, PE – 50 Hz – 100 A – 65 kVA Knodpfxokqxtze Adbed

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A manual partial cleaning machine D.W. Renzmann for the printing industry, complete with exhaust air system, is available. Useful dimensions (X/Y/Z): 1800mm/600mm/300mm, washing pump capacity: 5 m³/h, internal extraction: 2000 m³/h at 1.1 kW, overall dimensions (X/Y/Z): approx. 2900mm/1200mm/1800mm. Documentation is available. On-site inspection possible. Knodotul Nvjpfx Adbsd

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Stroji za popolno proizvodnjo dimenzioniranih brezovih delov: 1) Leadermac LMC-523SP 2) WoodEye 5, W5-CC-4444 3) Paul 11KE 4) SCM Group Celaschi Progress 5) Weinig AG Unimat 23 EL Vključen je ves transportni trak in aspiracijske cevi. Kedpsttmm Rsfx Adbond

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system Optional control system extension available 2 identical machines available External dimensions: Overall height: 4,730 mm Width: 3,270 mm Depth: 1,680 mm 29 carriers, each with a payload capacity of 250 kg Usable internal dimensions per carrier: Height = 215 mm Width = 2,730 mm Depth = 620 mm Chain pitch: 254 mm For 0 carrier units, intermediate shelves are available, allowing a load capacity of 160 kg per usable level Intermediate shelves can be manufactured on request Deposit table at a height of 900 mm above finished floor level – worktop with V2A stainless steel cover Kodsdnhz Uspfx Adbsnd Color: grey / grey Surface cleaned, signs of use possible Drive motor power: 2 x 1.5 kW / 400 V Subject to errors and technical modifications or deviations in photos Delivery & installation currently mainly in Germany, Austria, and other neighboring countries

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 1700 x 660 x 850 mm Weight: 180 kg Total power requirement: 3 kW Profile Sanding Machine, Oscillating, OFS-2 - Working height of brush unit: 150 mm - Diameter of brush unit: 280 mm - Double-sided - Each brush unit equipped with 20 sanding/brush strips - Motor power: 3.0 kW - Infinitely variable speed control: 0 – 1400 rpm - Voltage: 400 V / 50 Hz - Dimensions of abrasive flap: 150 x 60 mm - Dimensions: L=1700, W=660, H=850 mm - Weight: 180 kg OPTION: - Abrasive flap 150 x 60 mm, P180, EUR 2.00 each Knjdpfx Ajvz Hzfodbsd - Abrasive flap 150 x 60 mm, P240, EUR 2.00 each - Abrasive flap 150 x 60 mm, P320, EUR 2.00 each

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Tank capacity: 775 l, maximum batch weight: 100 kg, heating power: 26 kW, maximum temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swing drive, automatic water filling, and oil separation with coalescence separator unit and oil collection container. Documentation available. On-site inspection possible. Kodswr Dxhjpfx Adbsnd

Stanje: delavnici obnovljeno (rabljeno), skupna dolžina: 2.650 mm, skupna širina: 2.760 mm, skupna višina: 7.510 mm, Modernized machine with new LTG-StoreControl LL control system External dimensions: Construction height: 7,510 mm Construction width: 2,760 mm Construction depth: 2,650 mm 40 carriers with a load capacity of 170 kg each with usable clearance dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 9,000 kg Operator opening starts 900 mm above finished floor level, then 750 mm high Color scheme: GREY / GREY, carriers sendzimir-galvanized, surfaces cleaned, signs of use possible Performance values: Vertical drive: 1 x 3.0 kW / 400 Volt Horizontal drive: 1 x 0.37 kW / 400 Volt Subject to errors, technical modifications, and deviations from photos Ksdpfx Adedpd Scebjnd Delivery and installation currently primarily in Germany, Austria, and several neighboring countries

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 800x860x850 mm Weight: 140 kg Total Power Requirement: 1.5 kW Profile Oscillating Sanding Machine OFS-1 Ksdpfxevz Hy Uo Adbond - Working Height of Brush Unit: 150 mm - Brush Unit Diameter: 280 mm - Brush Unit equipped with 20 sanding/brush strips - Motor Power: 1.5 kW - Infinitely variable speed control: 0 - 1400 rpm - Voltage: 400 V / 50 Hz - Sanding Lamella Dimensions: 150 x 60 mm - Machine dimensions: L=800, W=860, H=850 mm - Weight: 140 kg OPTIONAL: - Sanding Lamella 150 x 60 mm P120 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P250 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P180 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P240 EUR 2.00 / pc - Sanding Lamella 150 x 60 mm P320 EUR 2.00 / pc

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system Kodjdvlt Hspfx Adbjnd External dimensions: Installation height: 5750 mm Installation width: 3350 mm Installation depth: 1550 mm 26 carriers, each with a payload of 250 kg Clear usable dimensions per carrier: Height = 335 mm Width = 2650 mm Depth = 450 mm Chain pitch: 381 mm Depositing table at a height of 1000 mm above the finished floor level – worktop made of wood/rubber Color scheme: grey/blue, Surfaces cleaned, signs of use possible Drive motor power: 1 x 3.0 kW / 400 Volt Subject to errors, technical modifications and deviations from the photos. Delivery and installation currently mainly within Germany, Austria and several neighboring countries.

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H) 1250x880x850 mm Weight: 180 kg Total power requirement: 1.5 kW Moulded part grinding machine BSV-2 - Working width brush unit: 300 mm - Working width grinding unit: 220 mm - Double-sided - Motor power: 1.5 kW - Infinitely variable speed control - Voltage: 400 V / 50 Hz - Grinding flap dimensions: 300 x 60 mm - Dimensions: L=1250, W=880, H=850 mm - Weight: 180 kg Knodpfjvz E A Uex Adbod OPTIONAL: - Grinding flap 300 x 60 mm P180 EUR 1.90 / piece - Grinding flap 300 x 60 mm P240 EUR 1.90 / piece - Grinding flap 300 x 60 mm P320 EUR 1.90 / piece - Abrasive belt 1350 x 220 mm P180 EUR 7.00 / piece

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H): 1250 x 880 x 850 mm Weight: 180 kg Total power requirement: 1.5 kW Mould grinding machine BSH-2 - Working width brush unit: 300 mm - Working width sanding unit: 220 mm - Double-sided - Motor power: 1.5 kW - Infinitely variable speed control - Voltage: 400 V / 50 Hz - Sanding lamella dimensions: 300 x 60 mm - Dimensions: L=1250 mm, W=880 mm, H=850 mm - Weight: 180 kg OPTIONAL: - Sanding lamella 300 x 60 mm P180 EUR 1.90 / piece - Sanding lamella 300 x 60 mm P240 EUR 1.90 / piece Knodpfevz Ey Tsx Adbed - Sanding lamella 300 x 60 mm P320 EUR 1.90 / piece - Sanding belt 1350 x 220 mm P180 EUR 7.00 / piece

Leto izdelave: 2025, Stanje: novo, Dimensions (L/W/H) 1320x660x850 mm Weight 170 kg Total power requirement 1.5 kW Knjdpovz Ekxefx Adbsd Profile Sanding Machine BB-2 - Working width of brush unit: 300 mm - Double-sided - Motor power: 1.5 kW - Infinitely variable speed control - Voltage: 400 V / 50 Hz - Abrasive flap dimensions: 300 x 60 mm - Machine dimensions: L=1320, W=660, H=850 mm - Weight: 170 kg OPTION: - Abrasive flap 300 x 60 mm P180 EUR 1.90 / piece - Abrasive flap 300 x 60 mm P240 EUR 1.90 / piece - Abrasive flap 300 x 60 mm P320 EUR 1.90 / piece