Saacke nakup rabljenega (12)

Stanje: rabljeno, Leto izdelave: 1994, Workpiece diameter: 110 mm Grinding length: 410 mm Clamping length: 20 mm Total power requirement: 0.25 kW Machine weight approx.: 500 kg Space requirement approx.: S A A C K E Manual Form Cutter – Bevel Grinding Machine for grinding form tools made of HSS and carbide profile cutters, etc. (see separate PDF) Model: FSM Year of manufacture: 1994 Serial no.: 172/94 --- Center height of workpiece carrier II approx.: 110 mm Collet chuck for end mills Ø: 0.5 – 30 mm Axial adjustment range of workpiece: 14 mm Template adjustment range: 20 mm Base table: 700 x 800 mm Tabletop height above floor (raised): 900 mm Grinding head: Grinding wheel Ø x bore: 175/125/75 x 51/32 mm Grinding wheel speed via pulley: 3,150-4,500-6,300 rpm Grinding head height adjustment approx.: 65 mm Adjustable clearance angle approx.: 0 – 45 ° Spindle drive/total drive: 0.25 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories / Special equipment: • Units such as the grinding head slide, workpiece carrier No. 2, and the dressing and setting block can be easily adjusted on an air cushion. All units can be operated or fixed separately via pneumatic valves; they are optimally adjustable for any grinding application due to their placement on a “planar air bearing.” Nsdpfx Alst Hw Nmetswi • Workpiece holder A with collet chuck device • Separate workpiece holder B with steep taper 50 mounting, each for alternate installation on the workpiece carrier • Grinding wheel dressing block with diamond and setting gauge • Various collets, approx. 50 pieces in all sizes, other accessories Condition: good – ready for demonstration under power and air Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner, 10,500 kW, oil + gas. Year of manufacture: 2013. Nwodpfx Aevrkcnjltji

Stanje: rabljeno, Leto izdelave: 1995, številka stroja/vozila: UWIIA/3472/95, Grinding diameter - max.: 300 mm Grinding length: 400 mm Nwsdpfx Aljcxxrfjtji Workpiece length: 520 mm Center height: 150 mm Table stroke: 550 mm Infinitely variable table speed: 0.005 – 5.0 m/min Distance between centers: 350 mm Grinding spindle speed, 4 steps: 250/3750/5000/7500 rpm Max. grinding wheel diameter: 250 mm Swiveling grinding spindle head: 11–60° Spindle motor power: max. 3.0 kW Total power requirement: 7.7 kW Universal CNC tool grinding machine with SIEMENS 810 G3 control, 4 axes, with electronic handwheel and spindle pitch correction, equipped with FORKART OVERZ-BR hydraulic collet chuck, coolant system, automatic central lubrication, enclosure with movable viewing window at the operator station, separate control cabinet, safety emergency stop at the control cabinet, machine lamp, SIEMENS servo drives, in very good condition.

Stanje: rabljeno, Leto izdelave: 2006, SAACKE gas burner GLS 80, year of manufacture 2006, 6000 kW For further details and scope of delivery, please refer to the photos. Nwjdpfx Ajtzxn Hjltji Technical specifications as per type plate. Item condition: used, untested Without original packaging Sample pictures Viewing in Wettringen possible! For further questions, please contact us by email. Sale is exclusively to business customers for commercial purposes and under exclusion of any warranty for material or legal defects! By making a purchase, you confirm that you are acting in a commercial or self-employed capacity. Otherwise, you will be in violation of our terms and conditions!

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 26.721 h, Funkcionalnost: nepreverjeno, največja hitrost vretena: 12.000 obr/min, hitrost vretena (min.): 2.000 obr/min, potovalna razdalja osi X: 530 mm, pomik osi Y: 400 mm, pomik po osi Z: 320 mm, dolžina mize: 245 mm, širina mize: 140 mm, SAACKE UW1F Center Height: 155 mm Maximum Tool Diameter: 200 mm Maximum Tool Length: 270 mm Travel X/Y/Z: 530/400/320 mm Feed Rate: 0 – 15 m/min Table Size: 245 x 140 mm B-Axis: Swivel Range: 240° Rotation Speed: 180°/s Grinding Wheel Interface: HSK-E50 Grinding Spindle: Nwedpfx Aleyma I Hjtoi Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-Axis: Swivel Range: ± 15 arc minutes Maximum Speed: 600 rpm Spindle Bore: 32 mm Axis Drives: X/Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding Wheel Changer: 4 positions Three stations on the table (maximum diameter 125 mm) One station on the tool holder (maximum diameter 175 mm) CNC Control: NUM AXIUM POWER with PC and software for: Milling cutters Form cutters Clamping systems Drills and step drills Roundness control 3D collision control Zero-point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 hours Spindle hours: 9,846 hours Scope of delivery: RENISHAW 3D measuring probe mounted on the grinding head Coolant unit Various tools and tool clamping accessories Coolant and filter unit GS Industrietechnik RBAFWT113 ND Coolant filter unit GS Industrietechnik RBAFWT113 ND, year of manufacture 2013 Coolant filter unit BÜCHELE 511006

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), skupna višina: 2.350 mm, This 6-axis SAACKE UWIID grinding machine was manufactured in 2001. It is equipped with a NUM 1050 control, Num MDLU2 drives, a 24-position grinding wheel changer, and a Felsomat 70-slot workpiece loader. The machine includes a CNC steady rest, automatic gripper clamping, and the NUMROTO plus 3.8.1o software, making it ideal for both production and re-sharpening operations. For further information about this grinding machine, please contact us. Nwsdpfx Aoyvii Holtji Additional Equipment • Automatic gripper clamping • Various accessories and clamping devices • Complete documentation • Machine dimensions: 4.1 m x 2.85 m x 2.35 m / Felsomat loader dimensions: 1.60 m x 1.50 m x 2.1 m Machine Advantages Technical Machine Advantages • Tool changer: 24 stations for grinding wheels • Workpiece loader: Felsomat with 70 positions • CNC steady rest with various attachments • NUMROTO plus 3.8.1o drill PC software, CNC software 20448254, frequency converter, overhauled grinding spindle, high-pressure cooling option • Operation requires low-viscosity grinding oil • 1x NUM power supply replaced • 1x drive amplifier replaced • Machine is sold with a brand-new spindle Additional Information Machine still under power Dimensions: Machine Depth: 4100 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: UWII/2567/78, Tool grinding machine Nwedpfev Hcblsx Altji Motorized height adjustment has been repaired Spare parts supply is ensured by a repair service > Grinding table 835 x 145 mm < Longitudinal travel by hand 500 mm Swiveling capability 90 degrees > Grinding head < Cross travel 220 mm Height adjustment 250 mm Swiveling range horizontal + vertical - 360 degrees Enlargement of the operating range via eccentric plate Grinding spindle D60x240mm Speeds – 2 belt stages 3300/5400 rpm Weight approx. 700 kg Space requirement 1800x1300x1600 mm The machine is operational, all movements can be actuated with the handwheel.

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Višina konic: 150 mm, razdalja med konicama: 800 mm, največja dolžina brušenja: 400 mm, mere mize X/Y: 1245 mm/200 mm, premer brusilnega vretena: 80 mm, dolžina brusilnega vretena: 400 mm, nosilec obdelovanca: ISO50, hitrost vretena: 8000 obr/min. Dokumentacija na voljo. Ogled na lokaciji je možen. Nwedoy D Tp Tepfx Altoi

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), skupna masa: 3.800 kg, največja hitrost vretena: 600 obr/min, število osi: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a robust grinding spindle peak power of 16 kW. The machine accommodates a wide range of workpiece sizes with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking for high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Contact us for more details. • Workpiece Carrier A-Axis: Direct drive/hollow shaft motor; Indexing accuracy ±15''; Indexing possibilities 1-999; Cumulative lead error over 100 mm: 8 µm; Max. speed: 600 rpm • Tool holder: ISO 50 • Spindle sleeve clearance: max. 28 mm (automatic clamping: Ø20 mm) • Rated drive power: - Grinding spindle S1-100%: 7.5 kW; peak: 16 kW - X-axis longitudinal travel: 2 kW - A-axis workpiece carrier: 2 kW - Z-axis cross slide: 2 kW - Y-axis grinding head slide (vertical): 2 kW - B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: - A-axis: direct measuring system - B, X, Y, Z axes: indirect measuring system - Resolution X/Y/Z: 0.0001 mm (0.1 µm) - Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; pre-fusing: separate supply from network • Compressed air: 15-17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated with included measurement instructions (no marked reference points) Additional Equipment • Workpiece changer options (automation): - Option 1: Pick-up variant - Max. workpiece: Ø20 mm × 120 mm; 1 kg - Capacity per pallet: • Ø3.0-5.0 mm shank: 40 pcs • Ø5.1-8.0 mm: 32 pcs • Ø8.1-11.0 mm: 28 pcs • Ø11.1-14.0 mm: 24 pcs • Ø14.1-20.0 mm: 20 pcs - Option 2: Chain loading magazine (with gripper unit) - Capacity: 64 workpieces - Max. workpiece: Ø32 mm × 200 mm; 2.5 kg - Features: chaotic loading of various workpieces; automatic collet change possible Nsdpfxjyiz R Uj Altswi - Clamping sleeves: Ø6, 8, 10, 12, 14, 16, 20 - Option for external chain loader: increases machine weight to approx. 3,800 kg and required space to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): installation by customer; air for backflushing approx. 700 Nl/min for 5 min every 6-9 hours

Stanje: zelo dobro (rabljeno), Surface grinding machine SAACKE Grinding head with adjustable angle Nsdjhpqf Ujpfx Altowi

Stanje: rabljeno, Leto izdelave: 1988, Manufacturer: Haacke Model: UW II A-CNC Nwodog Tvmbopfx Altei Year of manufacture: 1988 Suitable only for step drills up to max. Ø 30mm Cross adjustment: 250mm Vertical adjustment: 250mm Grinding length: 400mm Weight: 1.4t Footprint: 2.5 x 1.2 x 1.9m Application: For grinding steps on step drills Accessories: Paper band filter, brand LKK Front lamella collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: UWID/5000/97, hitrost vretena za brušenje: 10.000 obr/min, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 20 m/min, višina središča: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed rate X-axis: 0 – 20 m/min Feed rate Y-axis: 0 – 10 m/min Feed rate Z-axis: 0 – 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Nwodpfxsyh I U Is Altoi Spindle speed range: 2,000 – 10,000 rpm Workpiece carrier A-axis Indexing accuracy: ± 15″ Cumulative indexing error (with ∅ 100 mm): 8 µm Mounting: ISO 50 Max. rotational speed: 50 rpm Linear/rotary encoder resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control system: NUM 1050 M with PC; program memory: 512 KB Drive powers Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece carrier A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10–12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, Class 4 Ambient temperature Operating: 15°C – 35°C Weight: 7,400 kg Further documentation for the machine is available on request.