Rezalniki nakup rabljenega (577)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Avstrija
226 km
Laser z optičnimi vlakni
KK-IndustriesLaser Fiber FLC-P 2060 6 kW + 220 mm Rohrschneide
Klic
Stanje: novo, Laser power: 6 kW
Loading capacity: 1250 kg
Positioning accuracy: 0.05 mm
Repeatability: 0.03 mm
Table change time: approx. 15 s
Cooling system: water chiller
Weight approx.: 17,500 kg
Dimensions (LxWxH): 4,400 x 9,500 x 2,350 mm
Max. speed: 120 m/min
Tube diameter: 220 mm
Working area: 2,000 x 6,000 mm
The FLC-P Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine for tubes and profiles. It’s a high-efficiency laser cutting machine that meets upper-tier standards and can reach laser power ratings up to 20,000 W, making it a very good choice for thick plate cutting. FLC fiber laser cutters are commonly used in the processing of agricultural machinery, textile machinery, food machinery, construction machinery, elevator manufacturing, and other large machines and plants.
You do not need to purchase two separate machines—you can cut both sheet metal and tube profiles with this unit.
The compact design saves space.
A machine with dual-purpose functionality: capable of cutting both sheet material and metal tubes/profiles.
Standard tube/profile cutting length is 6 meters, extendable to 9 meters upon request.
The tube diameter can be used up to a maximum of 350 mm.
The chucks can clamp and self-center automatically at the push of a button.
Wireless remote allows for easy blowing, cutting, pausing, calibration simulation, and more.
Kjdjtwtn Ispfx Af Tedg
Standard nesting software quickly nests parts for cutting with minimal operator input and includes a flycut function for rapid straight-line cutting.
The double exchange table enables continuous cutting without downtime.
All of our machines are manufactured to European standards and come with a CE certificate.
Our FLC models feature nozzle cleaning and a dual-camera system.
Available working areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser head features autofocus and active anti-collision, as well as an auto-view function that detects obstacles and moves automatically.
Cutting heads are equipped with active cooling.
All bridges on our machines are single-piece welded aluminum plate constructions. This design ensures rigidity, prevents deformation under loads or shocks, and allows high speeds and accelerations due to its lower weight (three times lighter than steel bridges).
Accessories included:
- Water chiller
- Control cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch touch CNC controller
- Flycutting
- Nozzles and lenses (starter kit included)
- Parts scrap drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE conformity
- On-site machine training
- Wireless remote query
- Automatic lubrication system
- Dual camera
SPECIFICATION VALUE Working area:
Mali oglas
Avstrija
226 km
Laser z optičnimi vlakni
KK KletzerLaser Fiber FLC-P 1530 2 kW + 220 mm Rohrschneidev
Klic
Stanje: novo, Laser power: 2Working area: 1500 x 3000 mmLoad capacity: 1250 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 13000 x 4400 x 2350 mmWeight approx.: 12,500 kg
The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting machine with high efficiency and premium class standards. It can accommodate a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and plants.
It is the ideal cutting machine for anyone looking to outsource cutting tasks.
The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, etc.
The standard nesting software quickly prepares parts for cutting without operator intervention. It also features a flycut cutting function.
Thanks to the dual exchange table, cutting can continue without downtime.
All our machines are manufactured to European standards, and we hold a CE certificate.
Our FLC-type machines are equipped with nozzle cleaning and a dual camera system.
Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser head is equipped with autofocus, an active anti-collision function, and an auto-view feature that detects obstacles and moves automatically.
Cutting heads are fitted with automatic cooling.
All bridges used in our machines are a single piece, made from welded aluminum alloy sheets. This single-piece construction ensures bridge rigidity and prevents deformation during impacts, overlaps, or loads. Additionally, thanks to their structure being three times lighter than steel profile bridges, we can achieve high speeds and accelerations with lower motor power.
Accessories included:
- Water chiller
- Control cabinet cooling
- Automatic focusing head
- Nesting software
Ksdpfxjruwapo Af Tedg
- 19-inch touch CNC control
- Fly cutting
- Nozzles and lens starter kit
- Scrap drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE conformity
- On-site machine training
- Wireless remote inquiry
- Automatic lubrication system
- Dual camera
SPECIFICATIONS:
Working area: 1500 x 3000 mm
Load capacity: 1200 kg
XY travel: 1520 x 3030 mm
Z-axis travel: 300 mm
XYZ axis guide: 4-point ball cage
XY drive system: Rack and pinion
Z drive system: Ball screw
XY-axis speed: 100 m/min
Z-axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table changeover time: 10 sec
Laser source: Raycus / Hans / JPT
Output power of laser source: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: Fscut
Laser cutting head: Raytools / BOCI / WSX
Supported gases: Air / Oxygen / Nitrogen
Cooling type: Water chiller
Mali oglas
Avstrija
226 km
Vlakenski laser
KK KletzerFaserlaser Schneidmaschine KK 3015E 6 kW
Klic
Stanje: novo, Delovno območje: 3000 x 1500
Natančnost pozicioniranja: 0,03
Ponovljivost: 0,02
Kedpfx Ajxwfu Eof Tsdg
Moč laserja: 6 kW
Tehnični opis – Vlaknovi laserski rezalni stroj LD-3015E
Model: 3015E
Delovno območje: 3000 × 1500 mm
Maksimalna premikalna hitrost (Linkage Speed): 170 m/min
Maksimalno pospeševanje: 2,0 G
Skupne dimenzije stroja: 10.000 × 3.000 × 2.400 mm
Skupna teža: 5.000 kg
Natančnost pozicioniranja: ±0,03 mm
Ponovljivost: ±0,02 mm
Z-hod: 350 mm
Laserska glava: BOCI BLT421 (6 kW)
Portalska struktura: varjeni železni portal
Laserski vir: Raycus 6000 W (CE certificirana globalna različica)

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Avstrija
226 km
Laser z optičnimi vlakni
KK KletzerLaser Fiber FLC-P 1530 3 kW + 220 mm Rohrschneidev
Klic
Stanje: novo, Laser power: 3 kW
Working area: 1500 x 3000 mm
Loading capacity: 1200 kg
X-axis travel: 1520 mm
Y-axis travel: 3030 mm
Positioning accuracy: 0.05 mm
Repeat accuracy: 0.03 mm
Dimensions (LxWxH): 10,000 x 400 x 2120 mm
The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This laser cutting system offers high efficiency and complies with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems.
It is an ideal cutting machine for anyone looking to outsource their cutting operations.
Wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more.
The machine includes standard nesting software that quickly arranges parts for cutting with minimal operator input and features flycut capability.
With a double shuttle table design, cutting can continue without downtime.
All our machines are manufactured to European standards and come with CE certification.
Kodpfx Aforuwawj Todg
Our FLC series machines are equipped with nozzle cleaning and a dual camera system.
Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
The laser head features autofocus, active anti-collision, and an auto-view function for obstacle recognition and automated adjustment.
Cutting heads are equipped with automatic cooling.
All machine bridges are constructed as a single-piece welded aluminum alloy for maximum rigidity and lightweight design. This reduces the risk of deformation due to shocks or loads and allows for higher speeds and accelerations with lower motor power compared to steel bridges.
Included accessories:
- Water chiller
- Control cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch CNC touch controller
- Flycut functionality
- Nozzle and lens starter kit
- Part debris drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE conformity
- On-site operator training
- Wireless remote monitoring
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS | VALUE
Working area: 1500 x 3000 mm
Loading capacity: 1200 kg
XY axis travel: 1520 x 3030 mm
Z axis travel: 300 mm
XYZ axis guide: 4-point ball cage
XY axis drive system: Rack & pinion
Z axis drive system: Ball screw
XY axis speed: 100 m/min
Z axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table change time: 10 s
Laser source: Raycus / Hans / JPT
Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: Fscut
Laser cutting head: Raytools / BOCI / WSX
Supported gases: Air / Oxygen / Nitrogen
Cooling type: Water-cooled
Machine weight: 12,000 kg
Mali oglas
Avstrija
226 km
Laser z optičnimi vlakni
KK KletzerLaser Fiber FLC-P 1530 12 kW + 220 mm Rohrschneide
Klic
Stanje: novo, Laser power: 12 kWWorking area: 1500 x 3000 mmLoad capacity: 1200 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 10,000 x 400 x 2,120 mm
The FLC series is a fast, responsive, reliable, and cost-efficient fiber laser cutting machine. It is a laser cutting machine offering high efficiency and features found in the premium segment. The machine can handle laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems.
It is an ideal cutting solution for anyone looking to outsource cutting jobs.
The wireless remote control allows for straightforward blowing, cutting, pausing, calibration simulation, and more.
Standard nesting software enables rapid and operator-free preparation of parts for cutting. Additionally, the machine supports fly-cut functionality.
Thanks to the dual shuttle table, cutting can continue without downtime.
All of our machines are manufactured to European standards and come with CE certification.
Our FLC models feature automatic nozzle cleaning and a dual-camera system.
Available cutting areas are 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser heads are equipped with autofocus and active anti-collision features, as well as an auto-view system that detects obstacles and moves automatically. Cutting heads also have automatic cooling.
The bridges used in all our machines are made from a single-piece, welded aluminum alloy plate structure. Their one-piece construction guarantees rigidity and prevents deformation under impact, overlap, or load. Moreover, thanks to their design, which is three times lighter than steel bridge profiles, they achieve high speeds and accelerations with lower motor power.
Included accessories:
- Water chiller
- Electrical cabinet cooling
- Automatic focus head
- Nesting software
- 19" CNC touchscreen control
- Fly cutting
- Nozzle and lens starter kit
- Scrap drawers
- Automatic pallet changer
- Automatic nozzle cleaning
- CE compliance
- On-site machine training
- Wireless remote monitoring
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS
Kdjdpfsruwa Tjx Af Tog
ValueWorking area1500 x 3000 mmLoad capacity1200 kgXY-axis travel1520 x 3030 mmZ-axis travel300 mmXYZ axis guide4-point ball linear guidesXY axis drive systemRack and pinionZ axis drive systemBallscrewXY axis speed100 m/minZ axis speed30 m/minXY positioning accuracy0.05 mmXY repeatability0.03 mmPallet change time10 sLaser sourceRaycus / Hans / JPTLaser source output2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control systemFscutLaser cutting headRaytools / BOCI / WSXSupported gasesAir / Oxygen / NitrogenCooling typeWater coolingMachine weight12,000 kg
Mali oglas
Avstrija
226 km
Laser z optičnimi vlakni
KK-IndustriesLaser Fiber FLC-P 2040 3 kW + 220 mm Rohrschneide
Klic
Stanje: novo, Laser power: 3 Loading capacity: 1250x Travel X: 2020 mm Travel Y: 4050 mm Travel Z: 350 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table exchange time: approx. 10 sec Cooling system: Water chiller Weight approx.: 11,500 kg Dimensions (LxWxH): 4400 x 10,000 x 2120 mm
The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for the fabrication of agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment.
It is the ideal cutting machine for those looking to outsource their cutting operations.
Enables easy blowing, cutting, pausing, calibration simulation, etc., with the wireless remote control.
Comes with standard nesting software, enabling fast, operator-independent part preparation for cutting. Features Flycut cutting function.
With its double shuttle table, cutting can continue without waiting.
All our machines are manufactured to European standards and are CE certified.
Our FLC-type machines include nozzle cleaning and a dual camera system.
Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser head features autofocus and an active anti-collision function, plus an auto-view function that detects and automatically avoids obstacles.
Cutting heads are equipped with automatic cooling.
The bridges we use in all our machines consist of a welded construction made from aluminum alloy sheets and are one-piece. This ensures rigidity and prevents deformation under impacts, overlaps, or loads. Additionally, thanks to being three times lighter than steel profile bridges, higher speeds and accelerations can be achieved with less motor power.
Accessories included:
- Water chiller
- Control cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch touch CNC control
- Fly cutting
- Nozzle and lens starter kit
- Scrap drawers
- Automatic table changer
Kdjdpfx Afetuyf Hj Tsg
- Automatic nozzle cleaning
- CE compliance
- On-site machine training
- Wireless remote query
- Automatic lubrication system
- Dual camera
SPECIFICATIONS VALUE
Working area: 2000 x 4000 mm
Loading capacity: 1200 kg
XY axis travel: 2020 x 4050 mm
Z axis travel: 350 mm
XYZ axis guide: 4-point ball cage
XY axis drive system: Rack and pinion
Z axis drive system: Ball screw
XY axis speed: 100 m/min
Z axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table exchange time: 10 sec
Laser source: Raycus / Hans / JPT
Laser power output: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: Fscut
Laser cutting head: Raytools / BOCI / WSX
Supported gases: Air/Oxygen/N...
Mali oglas
Avstrija
226 km
Vlakenski laser
KK KletzerFaserlaser Schneidmaschine KK 3015E 6 kW
Klic
Stanje: novo, Delovno območje: 3000 x 1500
Natančnost pozicioniranja: 0,03
Ponovljivost: 0,02
Moč laserja: 6 kW
Tehnični opis – Vlaknovi laserski rezalni stroj LD-3015E
Model: 3015E
Delovno območje: 3000 × 1500 mm
Kdsdpfsxv Ha Hex Af Tsg
Maksimalna premikalna hitrost (Linkage Speed): 170 m/min
Maksimalno pospeševanje: 2,0 G
Skupne dimenzije stroja: 10.000 × 3.000 × 2.400 mm
Skupna teža: 5.000 kg
Natančnost pozicioniranja: ±0,03 mm
Ponovljivost: ±0,02 mm
Z-hod: 350 mm
Laserska glava: BOCI BLT421 (6 kW)
Portalska struktura: varjeni železni portal
Laserski vir: Raycus 6000 W (CE certificirana globalna različica)
Mali oglas
Bydgoszcz
807 km
Plazemski rezalni stroj 3000x1500
OtinusPCO-3015-DG
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma and Oxy-Fuel Cutting System PCO-3015-DG
The machine was designed and manufactured in Poland.
Technical Specifications
- X- and Y-working area: 1520 x 3100 mm
- Clearance between table surface and gantry: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on the power of the plasma source and the thickness of the material being cut): 25,000 mm/min
- Compatible with Hypertherm Powermax 45–125 plasma sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 3,650 mm
- Width: 2,280 mm
- Height: 1,500 mm
- Total weight: 1,200.0 kg
- Maximum load capacity: 2,500.0 kg
- Adjustable support feet: 6
Systems
GCS – Gas Cutting System: Integrated oxy-fuel cutting system enables cutting of plate thicknesses up to 150 mm.
THC – Torch Height Controller: Integrated controller automatically adjusts the torch height to the material, based on continuous analysis of fluctuations in arc voltage.
AMS – Align Material System: Automatically corrects information about the sheet angle relative to the table.
Visit and Test Our Machines
Take part in an exclusive demonstration led by a qualified Otinus technician who will showcase the full functionality of the machine. You will also have the opportunity to test how the system meets your individual requirements. You are welcome to bring your own technical drawings and sample materials.
Otinus Academy Learning Software (optional)
A steadily growing e-learning platform created for Otinus customers. With the purchase of this machine, you receive one year’s access to our online courses, enabling you to efficiently train new personnel or refresh training knowledge!
Ksdpfsh E Sgtsx Af Tjdg
On-site Commissioning and Operator Training at the Customer’s Facility (optional)
- Day 1 (up to 8 hours): Machine installation and instruction in the operation of the control system.
Telephone Support by a Specialist (optional)
- By phone: 7:30 a.m. to 9:00 p.m. (Mon–Sat) – 8-hour package usable within 12 months.
- Online: 7:30 a.m. to 2:30 p.m. (Mon–Fri) – 8-hour package usable within 12 months.
Access to Otinus Academy Online Courses (optional)
- MyPlasm – 12 months access
- LibreCad – 12 months access
Mali oglas
Bydgoszcz
807 km
Plazemsko-avtogena rezalna naprava
OtinusPCV-3015-DG
Klic
Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more!
The offer pertains to the basic version of the machine. All optional equipment and their prices can be found on our website.
CNC Plasma-Oxyfuel Cutting Machine PCV-3015-DG
The machine was designed and manufactured in Poland.
Technical specifications:
- X and Y working area: 1520 x 3100 mm
- Clearance between table surface and gantry: 240 mm
- Maximum height of profile to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on the power of the plasma source and the thickness of the material to be cut.): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction parameters:
- Length: 3650 mm
- Width: 2280 mm
- Height: 1500 mm
- Total weight: 1,200.0 kg
- Maximum load capacity: 2,500.0 kg
- Adjustable support feet: 6
Systems:
GCS - Gas Cutting System – integrated oxy-fuel cutting system allowing for cutting of sheets up to 150 mm thick.
THC - Torch Height Controller – integrated height control system that automatically adjusts the torch distance to the material based on the analysis of source voltage fluctuations.
AMS - Align Material System – automatically corrects material angle information relative to the table.
Come and test our machines
Take part in an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. In addition, you can test how the unit meets your needs. You are welcome to provide technical drawings and material samples.
Otinus Academy learning software (optional)
This is a continually expanding e-learning platform created for Otinus customers. With the purchase of this unit, you will receive one year’s access to online courses, enabling you to easily onboard new employees or refresh training knowledge!
On-site commissioning and operator training (optional)
- Day 1 (up to 8 hours) – installation of the machine and training on using the control system.
Technical support by a specialist (optional)
- By phone: 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour package to be used within 12 months.
- Online: 7:30 AM to 2:30 PM (Mon-Fri) – an 8-hour package to be used within 12 months.
Access to Otinus Academy online courses (optional)
Kdsdpferp Dmbjx Af Tog
- MyPlasm – access for 12 months
- LibreCad – access for 12 months
Mali oglas
Bydgoszcz
807 km
Plazemski rezalni stroj 2100x1000
OtinusPCO-2010-DG
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-2010-DG
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 1020 x 2100 mm
- Clearance between table surface and beam: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on the plasma source's power and the thickness of the material to be cut): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 2650 mm
- Width: 1780 mm
- Height: 1500 mm
- Total weight: 900.0 kg
- Maximum load capacity: 1120.0 kg
- Adjustable support feet: 10
Kdedethi Amspfx Af Tsg
Systems
THC – Torch Height Controller – integrated height control system that automatically adjusts torch distance to the material, based on analysis of source voltage fluctuations.
AMS – Align Material System – automatically corrects data regarding material angle in relation to the table.
Come and test our machines
Take part in an exceptional demonstration where a qualified Otinus technician will present the entire functionality of the machine. In addition, you can test how the equipment meets your specific requirements. You are welcome to provide technical drawings and sample materials.
Otinus Academy Learning Software (optional)
This is a continuously expanding e-learning platform created for customers of the Otinus brand. With the purchase of this device, you will receive one-year access to online courses, enabling you to either train new employees easily or refresh knowledge from previous training sessions!
On-site Commissioning and Operator Training (optional)
- Day 1 (up to 8 hours) – Installation of the machine and training on the operation of the control system.
Telephone Consultation by a Specialist (optional)
- By phone: from 7:30 to 21:00 (Mon–Sat) – an 8-hour package, to be used within 12 months.
- Online: from 7:30 to 14:30 (Mon–Fri) – an 8-hour package, to be used within 12 months.
Access to Otinus Academy Online Courses (optional)
- MyPlasm – 12-month access
- LibreCAD – 12-month access
Mali oglas
Bydgoszcz
807 km
Plazemski rezalni stroj 2020x6100
OtinusPCO-6020-DG
Klic
Stanje: novo, Leto izdelave: 2024, CNC plasma cutting system PCO-6020-DG
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 2020 x 6100 mm
Kdodpfxjh E Izfj Af Tog
- Clearance between table surface and beam: 240 mm
- Maximum profile cutting height: 200 mm
- Rapid traverse speed (cutting speed depends on the output of the plasma source and the thickness of the material to be cut): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 power sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 6750 mm
- Width: 2780 mm
- Height: 1500 mm
- Total weight: 2700.0 kg
- Maximum load capacity: 7000.0 kg
- Adjustable support feet: 10
Systems
THC – Torch Height Controller: integrated cutting height control system automatically adjusts the torch distance to the material, based on analysis of source voltage fluctuations.
AMS – Align Material System: automatically corrects material angle information relative to the table.
Visit us and test our machines
Take part in an exceptional demonstration where a qualified Otinus technician will showcase the full capabilities of the machine. Additionally, you can test how the device suits your requirements. You are welcome to bring technical drawings and material for samples.
Otinus Academy Learning Software (optional)
This is a continuously expanding e-learning platform created for Otinus customers. With the purchase of this device, you receive one year of access to online courses, allowing you to easily onboard a new operator or refresh knowledge gained from prior training!
On-site machine commissioning and operator training (optional)
- Day 1 (up to 8 hours) – machine installation and training on how to use the control system.
Professional telephone support (optional)
- Telephone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package to be used within 12 months.
- Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package to be used within 12 months.
Access to Otinus Academy online courses (optional)
- MyPlasm – 12 months’ access
- LibreCad – 12 months’ access
Mali oglas
Bydgoszcz
807 km
Plazemska plinska ločevalna naprava 2020x3100 mm
OtinusPCO-3020-DG
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma/Flame Cutting System PCO-3020-DG
The machine was designed and built in Poland.
Technical Specifications
- X and Y working area: 2020 x 3100 mm
- Clearance between table surface and gantry: 240 mm
- Maximum height of the profile to be cut: 200 mm
- Rapid traverse speed (cutting speed depends on plasma source power and material thickness): 25,000 mm/min
- Compatible with Hypertherm Powermax 45–125 plasma sources and Hypertherm MAXPRO200
Construction Data:
- Length: 3,650 mm
Kdsdpeh E Izbofx Af Tog
- Width: 2,780 mm
- Height: 1,500 mm
- Total weight: 1,550.0 kg
- Maximum load capacity: 2,800.0 kg
- Adjustable support legs: 6
Systems
GCS – Gas Cutting System – Integrated oxy-fuel cutting system enabling plate cutting up to 150 mm thick
THC – Torch Height Controller – Integrated torch height control system automatically adjusts torch distance to the material, based on analysis of arc voltage fluctuations
AMS – Align Material System – Automatically corrects material angle information relative to the table
Visit and test our machines
Attend an exclusive demonstration led by a qualified Otinus technician, who will showcase the full functionality of the machine. Additionally, you can test the device’s suitability for your tasks. Technical drawings and sample material can be provided.
Otinus Academy Learning Software (optional)
This is a continuously developing e-learning platform created for Otinus customers. With purchase of this device, you receive one year of access to online courses, enabling you to easily onboard new staff or refresh training knowledge!
On-site Commissioning and Operator Training (optional)
- Day 1 (up to 8 hours): Machine installation and training on control system operations.
Telephone Support by a Specialist (optional)
- Phone: 07:30–21:00 (Mon–Sat) – an 8-hour package to be used within 12 months
- Online: 07:30–14:30 (Mon–Fri) – an 8-hour package to be used within 12 months
Access to Otinus Academy Online Courses (optional)
- MyPlasm – Access for 12 months
- LibreCad – Access for 12 months
Mali oglas
Bydgoszcz
807 km
Komplet za plazemsko rezanje 1520x3100
OtinusPCO-3015-D
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-3015-D
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 1520 x 3100 mm
- Clearance between table surface and beam: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (actual cutting speed depends on plasma source performance and material thickness): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 3,650 mm
- Width: 2,280 mm
- Height: 1,500 mm
- Total weight: 1,100.0 kg
- Maximum load capacity: 1,800.0 kg
- Adjustable support feet: 6
Systems
THC – Torch Height Controller – integrated cutting height control system automatically adjusts the torch distance to the workpiece based on analysis of source voltage fluctuations.
AMS – Align Material System – automatically corrects material angle information relative to the table.
Come and test our machines
Take part in an exclusive demonstration led by a qualified Otinus technician, showcasing the full capabilities of the machine. Additionally, you can test if the equipment meets your specific needs. You are welcome to bring technical drawings and sample materials.
Otinus Academy Learning Software (optional)
This is a continuously expanding e-learning platform created for Otinus customers. With the purchase of this machine, you receive one year of access to online courses, making it easy to train new employees or refresh training knowledge!
On-site Commissioning and Operator Training (optional)
- Day 1 (up to 8 hours) – machine installation and hands-on training in using the control system.
Telephone Consultation with an Expert (optional)
- By phone: from 7:30 to 21:00 (Mon-Sat) – 8-hour package to be used within 12 months.
- Online: from 7:30 to 14:30 (Mon-Fri) – 8-hour package to be used within 12 months.
Access to Otinus Academy Online Courses (optional)
Kdjdpfeh E Izisx Af Tsg
- MyPlasm – 12-month access
- LibreCad – 12-month access
Mali oglas
Bydgoszcz
807 km
Plazemski rezalni sistem
OtinusPCO-2512-D
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-2512-D
The machine was developed and manufactured in Poland.
Kdodpfx Ash E Iy Esf Tog
Technical Specifications
- X and Y working area: 1270 x 2600 mm
- Clearance between table surface and beam: 240 mm
- Maximum height of material to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on the performance of the plasma source and the thickness of the material to be cut.): 25,000 mm/min.
- Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200
Construction Parameters:
- Length: 3,150 mm
- Width: 2,030 mm
- Height: 1,500 mm
- Total weight: 950.0 kg
- Maximum load capacity: 1,250.0 kg
- Adjustable support feet: 6
Systems
THC - Torch Height Controller – Integrated cut height control system automatically adjusts the torch distance to the material based on the analysis of changes in source voltage.
AMS - Align Material System – Automatically corrects information on the material angle in relation to the table.
Come and test our machines
Participate in an exclusive demonstration where a qualified Otinus technician will showcase the machine’s full functionality. In addition, you can test how the unit fits your requirements. You are welcome to bring along technical drawings and sample materials.
Otinus Academy Learning Software (optional)
This is a continuously expanding e-learning platform created for Otinus customers. When you purchase this device, you receive one year of access to online courses, allowing you to easily onboard new team members or refresh knowledge gained during training!
On-site Commissioning and Operator Training at Customer Location (optional)
- Day 1 (up to 8 hours) – Installation of the machine and training in the use of the control system.
Telephone Consultation with a Specialist (optional)
- By phone: 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months.
- Online: 7:30 to 14:30 (Mon-Fri) – an 8-hour package to be used within 12 months.
Access to Otinus Academy Online Courses (optional)
- MyPlasm – Access for 12 months
- LibreCad – Access for 12 months
Mali oglas
Bydgoszcz
807 km
Plazemski rezalnik na zalogi 2020x6100
OtinusPCO-6020-D
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-6020-D
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working range: 2020 x 6100 mm
- Clearance between table surface and beam: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on the plasma source power and the thickness of the material to be cut.): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200
Construction Data:
- Length: 6750 mm
- Width: 2780 mm
- Height: 1500 mm
- Total weight: 2600.0 kg
- Maximum load capacity: 5000.0 kg
- Adjustable support feet: 10
Systems
THC – Torch Height Controller: Integrated torch height control system automatically adjusts the torch distance to the material based on analysis of source voltage fluctuations.
AMS – Align Material System: Automatically corrects information about the material angle with respect to the cutting table.
Professional Support
Kdedpsh E Iyzofx Af Tsg
We ensure ongoing contact with our customers. That’s why we offer several hours of Otinus Specialist Support with every machine purchased.
Otinus Academy Learning Software
This is a continuously growing e-learning platform created for customers of the Otinus brand. By purchasing this machine, you receive one year of access to online courses that make it easy to onboard new operators or refresh training knowledge!
Come and test our machines
Take part in an exclusive demonstration where a qualified Otinus technician will show the full functionality of the machine. You can also test how the unit fits your requirements. You’re welcome to bring technical drawings and material for sample processing.
Scope of supply:
Commissioning and operator training at customer site:
- Day 1 (up to 8 hours): Machine installation and training in the control system operation.
Telephone support by a specialist:
- By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package to be used within 12 months.
- Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package to be used within 12 months.
Access to Otinus Academy online courses:
- MyPlasm – 12 months access
- LibreCad – 12 months access
Mali oglas
Bydgoszcz
807 km
Plazemska rezalna naprava 1020x2100
OtinusPCO-2010-D
Klic
Stanje: novo, Leto izdelave: 2024, CNC Plasma Cutting System PCO-2010-D
The machine was developed and manufactured in Poland.
Technical Specifications
- X and Y working area: 1020 x 2100 mm
- Clearance between table surface and beam: 240 mm
- Maximum profile height to be cut: 200 mm
- Rapid traverse speed (cutting speed depends on the plasma source power and the thickness of the material being cut): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200
Construction Parameters:
- Length: 2650 mm
- Width: 1780 mm
- Height: 1500 mm
- Total weight: 800.0 kg
- Maximum load capacity: 800.0 kg
- Adjustable support feet: 4
Kdedpfoh E Iytox Af Teg
Systems
THC – Torch Height Controller – integrated cutting height control system automatically adjusts the torch distance to the material based on analysis of changes in source voltage.
AMS – Align Material System – automatically corrects material angle information relative to the table.
Visit and test our machines
Take part in an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. Additionally, you can try out how the unit suits your requirements. You are welcome to provide technical drawings and materials for sample processing.
Otinus Academy Learning Software (optional)
This is a constantly expanding e-learning platform designed specifically for Otinus brand customers. By purchasing this unit, you receive one year of access to online courses, enabling you to train a new employee with ease or refresh your knowledge from previous training sessions!
On-site commissioning and operator training at the customer's premises (optional)
- Day 1 (up to 8 hours) – machine installation and training in the use of the control system.
Telephone support by a specialist (optional)
- By phone: from 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months.
- Online: from 7:30 am to 2:30 pm (Mon-Fri) – an 8-hour package to be used within 12 months.
Access to Otinus Academy online courses (optional)
- MyPlasm – access for 12 months
- LibreCad – access for 12 months
Mali oglas
Bydgoszcz
807 km
Plazemsko-avtogenska rezalna naprava 1200x2600
OtinusPCO-2512-DG
Klic
Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more!
The offer applies to the machine’s basic version. All additional equipment and their prices can be found on our website.
CNC Plasma/Flame Cutting System PCO-2512-DG
The machine was developed and manufactured in Poland.
Technical specifications:
- X and Y working area: 1270 x 2600 mm
- Clearance between table surface and crossbeam: 240 mm
- Maximum height of workpiece to be cut: 200 mm
- Rapid traverse speed (Cutting speed depends on plasma source power and material thickness): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200
Construction data:
- Length: 3150 mm
- Width: 2030 mm
Kdodpsrp A Ukofx Af Tog
- Height: 1500 mm
- Total weight: 1050.0 kg
- Maximum load capacity: 1750.0 kg
- Adjustable support feet: 6
Systems:
GCS - Gas Cutting System – integrated oxy-fuel cutting system, enables cutting of plates up to 150 mm thick.
THC - Torch Height Controller – integrated torch height control system; automatically adjusts the torch-to-material distance based on analysis of voltage fluctuations.
AMS - Align Material System – automatically corrects the information about the material’s angle in relation to the table.
Visit us and test our machines
Take part in a unique demonstration led by a qualified Otinus technician, who will showcase the full functionality of the machine. You can also try out how the equipment suits your requirements. You may bring technical drawings and sample materials.
Otinus Academy Learning Software (optional)
This ever-expanding e-learning platform is designed for Otinus brand customers. When purchasing this machine, you receive one year’s access to online courses that make it easy to onboard new employees or refresh training knowledge!
Commissioning and operator training at the customer’s site (optional)
- Day 1 (up to 8 hours) – Machine installation and training in the use of the control system.
Telephone consultation by a specialist (optional)
- By phone: 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months.
- Online: 7:30 am to 2:30 pm (Mon-Fri) – an 8-hour package to be used within 12 months.
Access to Otinus Academy online courses (optional)
- MyPlasm – 12-month access
- LibreCad – 12-month access
Mali oglas
Bydgoszcz
807 km
Plazemska rezalna naprava 2020x3100
OtinusPCO-3020-D
Klic
Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more!
The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website.
CNC Plasma Cutting System PCO-3020-D
The machine was designed and manufactured in Poland.
Technical Specifications
- X and Y working area: 2020 x 3100 mm
- Clearance between table surface and beam: 240 mm
- Maximum profile cutting height: 200 mm
- Rapid traverse speed (Cutting speed depends on the plasma source output and the thickness of the material to be cut.): 25,000 mm/min
- Compatible with Hypertherm Powermax 45-125 plasma sources, and Hypertherm MAXPRO200
Construction Parameters:
- Length: 3650 mm
- Width: 2780 mm
Kdedpfsrp Dcrox Af Tjg
- Height: 1500 mm
- Total weight: 1450.0 kg
- Maximum load capacity: 2000.0 kg
- Adjustable support legs: 6
Systems
THC – Torch Height Controller – integrated torch height control system automatically adjusts the torch-to-material distance based on the evaluation of source voltage fluctuations.
AMS – Align Material System – automatically corrects sheet alignment information relative to the table.
Come and test our machines
Take part in an exclusive demonstration, where a qualified Otinus technician will walk you through the full functionality of the machine. You can also try out how the device fits your needs. Feel free to bring technical drawings and sample materials.
Otinus Academy Learning Software (optional)
This is a continuously expanding e-learning platform created for Otinus customers. When purchasing this device, you receive one year of access to online courses, enabling you to easily onboard new staff or refresh previously acquired knowledge!
On-site Commissioning and Operator Training (optional)
- Day 1 (up to 8 hours) – Machine installation and training on the control system.
Expert Telephone Consultation (optional)
- By phone: 7:30 AM – 9:00 PM (Mon-Sat) – 8-hour package, to be used within 12 months.
- Online: 7:30 AM – 2:30 PM (Mon-Fri) – 8-hour package, to be used within 12 months.
Access to Otinus Academy online courses (optional)
- MyPlasm – 12-month access
- LibreCad – 12-month access
Mali oglas
Novi Marof
102 km
Stroj za prebijanje pločevine (štanca)
AMADA PROMECAMARIES 245
Klic
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, dolžina mize: 2.000 mm, širina mize: 1.000 mm, vhodna napetost: 410 V, skupna masa: 7.500 kg, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, Amada Aries 245 v dobrem stanju, skupaj z orodji (9 orodij z različnimi zračnostmi za različne debeline pločevine)
Kodpfx Afjxyzu Ho Tsdg
Mali oglas
Nemčija
509 km
CNC portalni plazemski stroj za rezanje
MesserMultitherm 4000 mit Skew Rotator
Klic
Stanje: rabljeno, Leto izdelave: 2020, CNC portalni plazemski rezalni stroj
z agregatom za posnemanje robov Skew Rotator Bevel
Proizvajalec: Messer
Tip: Multitherm 4000
Leto izdelave: 2020
CNC krmiljenje: Global Control Plus
Delovno območje: 3 x 12 m
Širina tira: 4.000 mm
1 avtogeni gorilnik ALFA
1 plazemski gorilnik z agregatom za posnemanje robov Skew Rotator Bevel
Napajalnik Hypertherm XPR300
Debelina rezanja:
50 mm prebijanje
Ksdpex Dlwmsfx Af Tedg
do 80 mm ločilni rez
Odvlečni (odsesevalni) pult Beuting
brez filtrirne naprave
Programska oprema: Omniwin z Bevel
161225
Mali oglas
Trittau
894 km
Laser rezalni stroj
MAUSER + KRAUSECOPS CRACKER
Klic
Stanje: rabljeno, Leto izdelave: 2013, Type: Crack machine
According to our assessment, the machine is in good used condition and can be inspected under power by appointment.
Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information.
Kdedpfxex N Nc Hj Af Teg
Technical specifications and details are subject to change and error. Prior sale reserved!
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Nemčija
394 km
CNC portalni plazemski stroj za rezanje
MicrostepSPL-P 12001.20
Klic
Stanje: dober (rabljeno), Leto izdelave: 2007, CNC portalni plazemski rezalni stroj
Proizvajalec: Microstep
Tip: SPL-P 12001.20
Leto izdelave: 2007
CNC upravljanje
1 plazemski gorilnik z napajalnikom Kjellberg HiFocus 160i
Odsesovalna miza: 2 x 12 m
Kedouv Hkgspfx Af Tedg
Filtrirni sistem Donaldson Torit DCE
161225ä
Mali oglas
Leipzig
609 km
Plazemski stroj za rezanje
WINTERADVERTISING 1930-100A
Klic
Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3700 x 2400 x 1470 mm
Kdodpfovz E A Ijx Af Tjg
Weight: 1500 kg
Total Power Requirement: 8.5 kW
Plasma Cutting Machine ADVERTISING 1930-100A
- Working area X-axis: 1900 mm
- Working area Y-axis: 3000 mm
- Cutting thickness: 0.5 - 10 mm
- Cutting speed: 0 - 8,000 mm/min
- Power: 8.5 kW
- Voltage: 400 V / 50 Hz
- Plasma power: 100 A
- Data transfer via USB interface
- Dimensions: 3700 x 2400 x 1470 mm
- Weight: 1500 kg
Base Machine: The machine’s main bed and gantry are robust, welded structures providing both static and dynamic rigidity. The gantry is mounted in the Y-direction on the machine bed. The cross support mounted on the gantry can travel in the X and Z directions.
Hardware / Control: The DSP control system allows flexible intervention in the workflow. With this DSP control, you can process your G-code files from the CNC router independently from a computer.
Software: Includes Vectric Cut2D PRO CAD/CAM software – ideal for creating machining programs for all application areas.
Software Features:
- 32-bit & 64-bit Windows-based software
- Windows 7
- Windows 8
- Windows 10
- G-code (DIN 6625)
- HPGL (*.PLT)
- Simulation
- Display of control codes (G-code or HPGL code)
Application: Suitable materials include iron, steel, aluminium, galvanized sheet, and titanium plates.
Mali oglas
Leipzig
609 km
Plazemski stroj za rezanje
WINTERADVERTISING 1325-60A
Klic
Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 3200 x 1960 x 1470 mm
Weight: 1000 kg
Total Power Requirement: 8.5 kW
Plasma Cutting Machine ADVERTISING 1325-60A
- Working area X-axis: 1300 mm
- Working area Y-axis: 2500 mm
- Cutting thickness: 0.5 – 8 mm
- Cutting speed: 0–8000 mm/min
- Power: 8.5 kW
- Voltage: 400 V / 50 Hz
- Plasma power: 60 A
- Data transfer via USB interface
- Dimensions: 3200 x 1960 x 1470 mm
- Weight: 1000 kg
Kedpfx Aovz E Azsf Tjdg
Base Machine: The machine base frame and the gantry are robust welded structures, designed for both static and dynamic rigidity. The gantry is positioned along the Y-axis on the machine frame. The cross slide, which can move in both X and Z directions, is mounted on the gantry.
Hardware / Control: The DSP control system enables flexible and direct intervention. With this DSP control, you can process your G-code files independently from a computer directly on the milling machine.
Software: Comes with CAD/CAM software Vectric Cut2D PRO—ideal for creating machining programs for all applications.
Software Features:
- 32-bit & 64-bit Windows-based software
- Compatible with Windows 7, Windows 8, Windows 10
- G-code (DIN 6625)
- HPGL (*.PLT)
- Simulation feature
- Display of control codes (G-code or HPGL code)
Applications: Suitable materials include iron, steel, aluminium, galvanized sheets, and titanium plates.
Mali oglas
Leipzig
609 km
Plazemski stroj za rezanje
WINTERADVERTISING 1325-100A
Klic
Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height) 3200 x 1960 x 1470 mm
Weight 1000 kg
Total power requirement 8.5 kW
Plasma Cutting Machine ADVERTISING 1325-100A
Kdsdpfx Ajvz E Aujf Teg
- Working area X-axis: 1300 mm
- Working area Y-axis: 2500 mm
- Cutting thickness: 0.5 – 10 mm
- Cutting speed: 0 – 8000 mm/min
- Power: 8.5 kW
- Voltage: 400 V / 50 Hz
- Plasma output: 100 A
- Data transfer via USB interface
- Dimensions: 3200 x 1960 x 1470 mm
- Weight: 1000 kg
Base machine: The main machine frame as well as the gantry are robust, high-rigidity welded constructions, ensuring both static and dynamic stability. The gantry is mounted on the machine frame and moves in the Y-axis direction. The cross slide, which is attached to the gantry, can move in both the X and Z axes.
Hardware / Control: The DSP controller enables flexible intervention in the machining process. With this DSP control system, you can process G-code files from your milling machine independently of a computer.
Software: Includes Vectric Cut2D PRO CAD/CAM software—the ideal solution for creating machining programs for all applications.
Software features:
- 32-bit & 64-bit Windows-based software
- Windows 7
- Windows 8
- Windows 10
- G-code (DIN 6625)
- HPGL (*.PLT)
- Simulation function
- Display of control codes (G-code or HPGL code)
Application: Suitable materials: iron, steel, aluminum, galvanized sheets, titanium plates
Olajšamo vam iskanje: "rezalniki"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Rezalniki (577)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































