Razvrštanje Sistem nakup rabljenega (16.601)

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), A complete Anritsu X-ray inspection system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal detector KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular intervals), max. product weight: 500g, max. throughput: 80 products/min. 4) Material feeding via Jöst FDL 350/60x500 vibratory trough. Documentation available. Hfodpfjt Dpn Aox Adksk

Stanje: pripravljen za uporabo (rabljen), A complete Boge compressor system with a capacity for 16 compressors and a central control unit is available. 1) Boge screw compressor SLF 271, output: 30.5 m³/min, cooling air flow rate: 5,000 m³/h, drive motor: 200 kW, weight: approx. 4,700 kg. 2) Boge screw compressor S 271, output: 30.5 m³/min, cooling air flow rate: 5,000 m³/h, drive motor: 200 kW, weight: approx. 4,500 kg. 3) Boge screw compressor S 180, output: 20.8 m³/min, cooling air flow rate: 5,000 m³/h, drive motor: 132 kW, weight: approx. 3,200 kg. 4) Boge microfilter FFP 250. 5) Boge refrigeration compressed air dryer DS 460, capacity: 46 m³/min, max. operating pressure: 14 bar, weight: approx. 500 kg. 6) Boge refrigeration compressed air dryer DS 260, capacity: 20.8 m³/min, max. operating pressure: 14 bar, weight: approx. 240 kg. 7) Boge air receiver, volume: 5,000 l, max. vessel pressure: 11 bar, weight: 1,200 kg. 8) Boge condensate treatment unit CC35, tank capacity: approx. 86 l, tank fill volume: 43 l. 9) Airtelligence Provis control unit with power measurement and OPS interface. 10) Cooling water recooling station, cooling capacity: 600 kW, flow rate: 37.2 m³/h, weight: approx. 1,000 kg. The entire system is operated via a central control unit. Complete documentation is available. On-site inspection is possible. Hjdjuanrdspfx Adkofk

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), A like-new Ruez coolant management system (KSS-Anlage) is available. Tank volume: 34,720 l; fill capacity: 32,710 l; effective volume: 22,020 l plus clean tank volume: 6,000 l. Level sensor: OWE 2C. Inlet/distributor: basket strainer. Machine dimensions (LxWxH): approx. 7,400 mm x 2,800 mm x 6,000 mm. Includes integrated sludge remover and chip conveyor. Comes with a two-piece Ruez lamella separator, Ruez safety tray, clean tank, Ruez magnetic roller filter, and chip skip superstructure. Band filter and sediment system are not included. Complete documentation available. On-site inspection possible. Hfsdpoudm Dtofx Adkjk

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), A complete painting line is available, comprising the following equipment: 1) Sergiani S.p.A. Monomatic S, year of manufacture: 2001. 2) Finnrose FLT 6, year of manufacture: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of manufacture: 1993. 6) Karl Heesemann FGA 6 EX, year of manufacture: 1993. 7) Finnrose FLT-4.5, year of manufacture: 1993. 8) Bürkle DAL2-1300, year of manufacture: 1985. Hackemack KTR 2040, year of manufacture: 1996. All machines are part of the painting system. On-site inspection is possible. Hfedpfx Adotpp H Ejkek

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A complete ESAB CNC gantry plasma cutting machine is available. Travel distance X/Y: 12,000mm/4,000mm, max. workpiece dimensions X/Y: 12,000mm/3,000mm, max. material thickness (steel): 150mm, total system dimensions X/Y/Z: approx. 15,000mm/5,200mm/1,500mm. System components: Kjellberg KWE 360 chiller, Kjellberg PGV 3 gas box, and Kjellberg PBA-360 plasma connection. The system has fire damage. Documentation is available. On-site inspection is possible. Hfjdpfjv Dkcfex Adkjk

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A filtration and recovery system with a filling and intermediate chute, featuring a new control unit as peripheral equipment for the production of technical nonwoven fabric and felt, is available. Components include: fan, three-phase motor WN 1 8030 T.50, Erko condenser, Erko separator (exhauster), filling chute, and intermediate chute. Control cabinet dimensions (L/W/H): approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of manufacture: 2023, overall system dimensions (L/W/H): approx. 3150mm/1100mm/3700mm. Documentation is available. On-site inspection is possible. Hfsdpfxsww Ivzj Adkek

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, A complete combined rotogravure and immersion roller line for wallpaper rolls (Chadwick) is available. Working width: approx. 560 mm, substrate: paper/nonwoven, printing process: water-based gravure, print units: 7, technical speed: 180 m/min, practical speed: 140 m/min, production output: approx. 13,000–15,000 rolls/24h. 1) Unwinder Windmöller & Hölscher 892C, year: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Underlay paper unwind and gluing station. 4) Draw station Lenze. 5) 2x cold embossing stations Saueressig, year: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8 m. 7) Double roller cooling station. 8) Web inspection system WV-Star 500, year: 2016. 9) Alignment and cutting unit Saueressig 200440Y, label: G9, year: 1989. 10) Automatic roll packer Ritter. 11) Turnover station Saueressig 201482Y, year: 1989. 12) Inclined belt conveyor, working width: approx. 1000 mm, length: approx. 3000 mm. 13) Centralised air supply and exhaust unit SitVerba, year: 2016, supply fans: 7, exhaust fan: 1. The entire line was comprehensively modernised in 2016 with new direct drives, drive control, plant control system, switch cabinets, piping, process air technology, etc. Documentation available. Inspection on site is possible. Hfjdewqqv Depfx Adkok

Stanje: pripravljen za uporabo (rabljen), A Zinser plasma cutting system is available. Table dimensions X/Y: 2000mm/6000mm. Plasma unit: Hypertherm HPR260. Extraction system: Donaldson. Extraction duct length: 10m. Includes various spare parts for the torch head. The automatic gas console is defective. Documentation is available. On-site inspection is possible. Hfsdpfxevamq Do Adkjk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Na voljo je naprava za odsesavanje in filtriranje lesnega prahu Krämer za žagine linije. 1) Odsesavanje lesnega prahu Krämer VKA-P 100/650/55, pretok zraka: 27.000 m³/h, povišanje tlaka: 3.800 Pa, moč motorja: 55 kW, dolžina klinastega jermena: 3.550 mm. 2) Filter naprava Krämer GFS Shake 160/25/250, filtrirna kapaciteta: 30.000 m³/h, filter material: poliester igelni filc, izločanje materiala: TFS40/10/1,1. 3) Ventilator Krämer VFM-R 45/250/3, pretok zraka: 3.000 m³/h, povišanje tlaka: 2.500 Pa, moč motorja: 3 kW. 4) Ventilator Krämer VFM-P 42/200/4, pretok zraka: 2.500 m³/h, povišanje tlaka: 3.000 Pa, moč motorja: 4 kW. 5) Separacijska posoda/filter lijak Krämer. 6/7) 2x aksialna ventilatorja. Vključno s cevmi in periferijo. Pri iztiskovalnem motorju je poškodovana prirobnica motorja. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hfodsxl Elgepfx Adkok

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Na voljo je pršna čistilna naprava Bous. Mere uporabnega prostora X/Y/Z: 470mm/650mm/300mm, največja teža materiala: 100kg, količina polnjenja: 500l, največja temperatura: 70°C, grelna moč: 18kW, premer izsesovalnega nastavka: 108mm, moč sušenja: 11kW, teža: cca. 1600kg. Vključuje polnilno postajo in lovilec olja. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hfsdpoy Nm Utefx Adkjk

Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC portalna plazemska in plamenska rezalna naprava. Delovne dimenzije X/Y: 6500mm/2500mm, vir napajanja: Kjellberg, največje število gorilnikov: 3, krmiljenje: Heidenhain TNC 355. Ogled na lokaciji je možen. Hfsdpfxox A Hhde Adkjk

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Na voljo je segmentni spajkalni stroj Dr. Fritsch za samodejno spajkanje segmentov (običajno diamantnih segmentov) na nosilna orodja. Ogled na lokaciji je mogoč. Hjdpfx Adox Ecuxskefk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Na voljo je visokozmogljiva paletirna naprava KL-Palettiertechnik. Izdelek za paletiranje: vreče/saki, zmogljivost paletiranja: 1800 sakov/h, velikost sakov: 5 l – 70 l, višina vhoda palete: 700 mm, višina izhoda palete: 700 mm, višina vhoda sakov: 3300 mm, maks. dimenzije plasti X/Y: 1200 mm/1400 mm, maks. višina skladiščenja: 2400 mm, vzorec: 3/6/4/5, maks. dimenzije palete X/Y: 800 mm/1200 mm, moč: 32 kW. Dimenzije stroja X/Y/Z: približno 9400 mm/4650 mm/3300 mm, teža: približno 4000 kg, HMI: Yaskawa, nadgradnja sistema nadzora: 2019. Naprava je zaradi delovnega okolja prašna, vendar je po naših informacijah popolnoma delujoča. Dokumentacija je na voljo. Možen je ogled na kraju samem. Hedpfx Ajzlkavsdkofk

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), Na voljo je visokofrekvenčni varilni stroj s premikajočo mizno ploščo Schirmacher. Dimenzije mize X/Y: 750 mm/550 mm, maksimalna tlačna sila: 20 kN, moč generatorja: 10 kW, delovna frekvenca: 27,12 MHz, upravljanje: Siemens. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hedpfxszh Niuo Adksfk

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC laserska naprava za označevanje in graviranje delov. Razred laserja: 1, tip laserja: diodno črpan Yb-laser, moč laserja: 20W, pomik X/Y/Z: 390mm/560mm/275mm, največje dimenzije obdelovanca X/Y/Z: 730mm/365mm/445mm, največja teža obdelovanca: 50kg, krmiljenje: AC-Laser. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hfjdpoyuyvtefx Adkek

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo je avtomatizirano ravnanje s paletami DMG Mori za obdelovalne centre. Število mest za palete: 7, največja teža obdelovanca: 250 kg, največji premer obdelovanca: 500 mm, največja višina obdelovanca: 400 mm, čas menjave palete: manj kot 40 s. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hfedpfx Ajydd Acodksk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Na voljo sta dva Ivat filter stolpa za prah in dim s temperaturno regulacijo in nanofiltrom. Pretok zraka: 22.000-25.000 m³/h, moč motorja: 18,5 kW, največja stopnja ločevanja: 99,95 %, filtrirna površina: 120 m², filter vložki: 4, dimenzije stroja (D/Š/V): ca. 2000 mm/1500 mm/3000 mm, teža: ca. 1200 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hodoyvuvlepfx Adkofk

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A Seica Pilot V8 Next Series Flying Probe Tester with left inline handling module for vertical swiveling of the PCB and right inline handling module for horizontal swiveling and rotation of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, active test area (manual): 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the DUT networks, standard analogue and digital in-circuit test, fixtureless testing, JSCAN and OPENFIX for testing ICs for opens and shorts, PWMON network analysis with power on of the assembly, continuity tests to detect open connections on the assembly, visual tests for component presence, absence, and rotation detection, high-resolution color camera, optional functional and boundary scan test capabilities, optional on-board programming tools for digital components, complete documentation included. On-site inspection is possible. Hjdpfxoy Sv S Ho Adksfk

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Na voljo je plazemski rezalni stroj. Rezilni tok: 20A - 130A, rezilna napetost: 88V - 132V, priključna napetost: 400V, maks. tokovna poraba: 46A, maks. vhodni tlak plina: 12 bar, vžigalna napetost: 17kV, pretok plina O2: 5300l/h, pretok plina N2: 3300l/h, pretok zraka: 3200l/h, zaščitni razred: IP22. Opremljen z avtomatsko plinsko konzolo, enoto za upravljanje Plasma-Gas-Control (PGC), obsežnim paketom cevi in premičnim strojnim ogrodjem. Teža stroja: cca 350kg, dimenzije stroja (D/Š/V): cca 1100mm/700mm/1450mm. Ogled možen po dogovoru. Hedsy Tauhopfx Adksfk

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Na voljo je Mafac dvokadni brizgalno-potopni čistilni stroj. Dimenzije košare X/Y/Z: 660mm/480mm/338mm, maks. teža polnitve: 100kg, prostornina rezervoarjev 1/2: 425l/300l, dimenzije stroja X/Y/Z: pribl. 1850mm/1400mm/1800mm, masa: pribl. 1000kg, delovne ure: 4531h. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hedpozhnrhjfx Adkofk

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Omrežna napetost: 3x 400V, 50Hz, varovalka: 125A počasna, največja priključna moč: 83kVA, rezalni tok pri 100 % delovnem ciklu: 80-300A, izhodna napetost: 112-200V, nazivni izhodni tok: 300A, delovni cikel: 100%, največji vhodni tok: 120A, zaščitni razred: IP22, razred izolacije: F, način hlajenja: AF (hlajenje z zrakom), poraba v prostem teku: 1,3kW, največji delovni tlak: 0,55MPa (5,5 bar), odpornost na prenapetost (Up): 17kV, plazemski gorilnik: PB-S80 W, uporabni plazemski plini: O₂, zrak, Ar, H₂, uporabni vrtinčni plini: zrak, N₂, dolžina: 1375mm, širina: 870mm, višina: 1505mm, teža: 556kg. Ogled na lokaciji je možen. Hsdozhnucopfx Adksfk

Stanje: pripravljen za uporabo (rabljen), Na voljo je mobilna naprava za čiščenje s peskanjem Munk + Schmitz. Premer peskalne glave: 103 mm, premer šobe: 8 mm, učinkovita širina peskalnega pasu: približno 30 mm, prostornina tlačilnega posodja: 60 l, kapaciteta peskalnega materiala (kovinski/nekovinski): 200 kg/100 kg, maksimalna velikost zrn peskalnega materiala: 1,6 mm, površina filtra: 21 m², učinkovitost odstranjevanja prahu: 99,9 %, dimenzije stroja (X/Y/Z): približno 2050 mm/750 mm/2300 mm, teža: približno 550 kg. Možen je ogled na kraju samem. Hfedpfszk Nafox Adkjk

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Na voljo je čistilna naprava z topili AMA Universal za čiščenje, razmaščevanje in sušenje kovinskih in plastičnih delov. Ogled je mogoč po predhodnem dogovoru. Število nadzornih kanalov: 8, količina topila: pribl. 160 l, masa topila: pribl. 194 kg, prostornina rezervoarja: pribl. 105 l, največja obremenitev košare: 80 kg, cikelna zmogljivost: do 80 kg/čiščenje, čas cikla: pribl. 20 min, premer delovne komore: pribl. 450×610 mm, premer nalagalne odprtine: pribl. 450 mm, premer bobna: pribl. 510 mm, globina bobna: pribl. 600 mm, zračni pretok: 230 m³/h, parni tlak: 5 bar, temperatura pare: 149°C, razpon vodnega tlaka: 3-5 bar, priključek za stisnjen zrak: 6-7 bar, upravljanje: PLC. Ogled je mogoč po predhodnem dogovoru. Hedpfjzhw S Dex Adksfk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, A complete screen and rotogravure printing line for wallpaper made of paper and nonwoven material is available. Capacity: 15,000 rolls/24h. Substrates: paper 80–150 g/m², nonwoven 50–150 g/m². Printing width: 1,060 mm; working width: 1,200 mm. Printing speed: 5–150 m/min. Components: pre-conditioning unit, gravure printing unit, 5x screen printing units, 2x combination screen/gravure printing units, 5x intermediate dryers (standard version), 2x intermediate dryers (1.5-fold dryer height), 1x main channel with 6x 4 m zones, slitter/rewinder, register embossing unit, double-head printing units. Various peripheral equipment and aggregates included. Overall dimensions (L/W/H): approx. 60 m / 8 m / 6 m. Documentation available. On-site inspection possible. Hfsdpfxot Rkatj Adkjk

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A complete bottle filling, sterilization, capping, labeling, cartoning, and palletizing line for the wine industry is available. Bottle filling capacity: 4,000 bottles/hour. Bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Burgundy/0.5l/0.25l. Sterilizer capacity: 4,000 bottles/hour. Capper capacity: 8,000 bottles/hour. Labeling capacity: 10,000 bottles/hour. Capping capacity: 10,000 bottles/hour. Carton formats: 12-bottle and 6-bottle boxes/ 12-bottle and 6-bottle cartons. Palletizing capacity: 1,000 cartons/hour. Line components: 1) Carton folding machine Normpack Compact Form CF 670/980, year: 2000, capacity: approx. 650 cartons/hour 2) Bottle filling machine Stork VV-24 L.W., year: 1977 3) Immersion sterilizer Silmo ST XII/110 with ozone, year: 1983, bottle formats: all standard wine bottles 4) Caustic tester Miho LC 2000, year: 2003 5) Capsule applicator Robino & Galandrino Monoblocco Fenix 3, year: 2002 6) Closure inspection unit Syscona Unicount with counting device for cork and metal closures 7) Labeling machine Garnep Lebetta 4/3/18 1320, year: 2017, including 2x wet glue units, 3x self-adhesive labeling units, camera system for bottle alignment and Domino laser for imprinting 8) Automatic capping machine Adelski PP2004 Longcap, year: 2007 9) Automatic capping machine Adelski MCA PV 6541/1/210 AVM2104, year: 1999 10) Corker Bertolaso Delta, year: 1977 11) Carton sealer Normpack NCF-047, year: 2001, including hot melt device 12) Packing machine Kettner Robot Junior Packer BE 2-T, year: 1992 13) Pallet loader Kettner Pressant Universal 1200, year: 1992 14) Case labeling machine Weber Legi-Air 40XX, year: 2004 15) Dryer Okema T3, year: 1999 Hfsdpfx Adjvur Htekjk 16) Carton printing machine Blum CompactLine 3.0, number of heads: 8, printing capabilities: double-sided 17) Ozone generator Silmo 40g, year: 1983 18) Glass handling machine Schaberger, year: 1977, including new glass handling head, 12-bottle case head, and bottle table. Documentation available. On-site inspection is possible.