Raptor Xl nakup rabljenega (2.719)

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vecoplan Vaz 1100 XL Leto izdelave: 2005 Blodpeymgdhefx Ag Tod Stroj je v zelo dobrem tehničnem stanju. Noži so bili nedavno zamenjani. Motor 30 kW. Stroj je popolnoma funkcionalen in pripravljen za delo. Možen je preizkus delovanja. Za več informacij pokličite.

Stanje: zelo dobro (rabljeno), Na prodaj profesionalni mobilni industrijski označevalnik FlyMarker XL. Ročna naprava za trajno označevanje kovinskih delov s točkovno tehnologijo dot peen. Model FlyMarker XL Napajanje 24 V DC Upravljanje preko vgrajenega zaslona in tipkovnice Samostojno delovanje brez potrebe po priklopu na računalnik Proizvajalec Nemčija Tehnično stanje dobro, naprava se vklopi in deluje. Zaslon in tipkovnica sta brezhibna. Vizualno stanje rabljeno, običajni znaki uporabe. Uporaba Označevanje serijskih številk Tehnične in proizvodne oznake Bljdpfx Ageyhnu De Tjd Označevanje jekla, aluminija in drugih kovin V kompletu Označevalnik FlyMarker XL Napajalnik Kabli Natanko to, kar je na slikah Možna pošiljka ali osebni prevzem. Za vprašanja sem na voljo.

Stanje: dober (rabljeno), We offer here a used rack connector for double rack rows from the manufacturer Link 51 for sale. The rack connectors are designed for a rack spacing of approx. 400 mm. Bjdpfx Ajd Tyizeg Tjld Technical data for the rack connector: Manufacturer: Link 51 Type: Boltless XL Included in delivery: 01x rack connector, used (consisting of 2 profiles) Suitable for: double rack rows Material color: anthracite total length: approx. 515 mm rack spacing: approx. 400 mm U-profile: approx. 27 x 30 mm weight/piece: approx. 1.321 kg/piece 04x hex bolts, M8 x 45 04x hex nuts, M8 04x washers, M8

Stanje: dober (rabljeno), Technical Data for Pallet Rack Beam: Racking System: Link 51 Type: Boltless XL Scope of Delivery Includes: 01x Pallet Rack Beam, used Material Color: yellow Box Profile: 80|53 x 45|25 mm Beam Type: 4 BST Step Profile: H 28 mm, W 20 mm Bracket: 4 HK (hooks) Clear Width: 2,700 mm Max. Load per Pair of Beams: 900 kg, with evenly distributed load 02x Locking Pins, used Design: fully galvanized For securing the horizontal beams against accidental lift-out Further Information on the Pallet Rack Beam: Beam type 4 BST is intended for use with chipboard, steel panels, or similar inserts, which then finish more or less flush with the upper edge of the beams. Bjdpfx Agskv Urwj Told This design results in no loss of height; additionally, the front side of the step beam protects the shelves or insert panels from damage. The beams are not intended for pallet storage, but rather serve as picking levels, i.e., for storing cartons, small parts, or similar items.

Stanje: dober (rabljeno), We are offering a used shelf connector for double-row shelving from the manufacturer Link 51 for sale. The shelf connectors are designed for a shelf spacing of approximately 300 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Included in the scope of delivery: Bledpfx Asd Tymdeg Tsd 01x Shelf connector, used (consisting of 2 profiles) Suitable for: Double-row shelving Material color: anthracite Overall length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight per piece: approx. 1.092 kg /pc 04x Hexagon bolts, M8 x 45 04x Hexagon nuts, M8 04x Washers, M8

Stanje: dober (rabljeno), We offer you here a used shelf connector for double rack rows by manufacturer Link 51 for sale. The shelf connectors are designed for a rack gap of approx. 650 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL Scope of delivery includes: 01x Shelf connector, used (consisting of 2 profiles) Suitable for: Double rack rows Material color: anthracite Overall length: approx. 765 mm Rack distance: approx. 650 mm U-profile: approx. 27 x 30 mm Weight/unit: approx. 1.878 kg/unit 04x Hexagon bolts, M8 x 45 04x Hexagon nuts, M8 Bledped Typyofx Ag Tod 04x Washers, M8

Stanje: dober (rabljeno), Technical data for the pallet rack beam: Racking system: Link 51 Type: Boltless XL Included in delivery: 01x Pallet rack beam, used Color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 900 kg with evenly distributed load Bledpfx Agekvnm Ao Tod 02x Safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Further information about the pallet rack beam: The 4 BST beam type is used to support chipboard, steel panels or similar, which then close off level with the top edge of the rack beams. This design does not reduce usable height, and the front edge of the step beam also protects the shelves or panel inserts from damage. The beams are not intended for pallet storage, but serve as order picking levels—i.e., for storing cartons, small parts, etc.

Stanje: novo, Technical Data for Base Plate: Manufacturer: Link 51 Type: Boltless XL Bedpfx Agorg D Awe Teld Suitable for frame profiles: M, H, E, and S Scope of delivery: 01x Base plate, new Material finish: sendzimir galvanized Material thickness: 4 mm Overall width: 96 mm Overall depth: 137 mm Number of mounting holes: 3 pcs. Hole diameter: 14 mm Weight: approx. 0.480 kg | pc. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport/shipping is desired beyond this, additional costs will apply, which can be individually requested from us based on the delivery location or scope of delivery.

Stanje: dober (rabljeno), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Scope of delivery includes: 01x pallet racking beam, used Colour: yellow Beam type: B120ZC Box profile: 120x50 mm Bledpfjlwuw Uox Ag Tsd Connector: 3 hooks Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg with evenly distributed load 02x locking pins, new Design: fully galvanized For securing the cross beams against accidental lifting out Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipment is required beyond this, additional costs will apply, which can be requested from us depending on the delivery location and the scope of delivery.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used accessory option "Canon POD Deck Lite XL-A1" Item for sale: 1 x Canon POD Deck Lite XL-A1: Compatible with various Canon imagePRESS models Blsdpfsv R Tx Nex Ag Tjd Condition: This offer is for a used unit, which may show signs of wear (such as minor scratches or yellowing). The device has been function-tested. A sample printout can be seen in the photo. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance! Sea-worthy packaging and worldwide shipping available on request! Before shipping or collection, a function test is recorded on video for you. For more detailed information, please feel free to contact us directly.

Leto izdelave: 2019, Stanje: generalkompletno obnovljen (rabljeno), Raptor by Pamminger, model 2350 DBS Bedpfx Agjic U Eks Tjld Machine was in use for 1 year Includes lifting station (blue) and, if required, powered roller conveyor. Top sheet function Program for setting corner edges.

Stanje: novo, Leto izdelave: 2026, ♻ Universell einsetzbar (verschiedenes Holz, Paletten mit Nägeln und Stiften, Spanplatten, Abfälle und Reste, Furnier, MDF-Platten, Kartons, Kunststoffe, Textilien usw.) ♻ Ein mit Förderband und Magnetabscheider integriertes Zerkleinerungssystem bietet eine umfassende Lösung für die Materialaufbereitung und -reinigung. ♻ Das System besteht aus einem leistungsstarken Schredder, der in der Lage ist, verschiedenste Materialien zu zerkleinern, einem Förderband, welches das zerkleinerte Material gleichmäßig verteilt und einen kontinuierlichen Materialfluss für die Weiterverarbeitung oder Entsorgung gewährleistet, sowie einem Magnetabscheider, der effizient eisenhaltige oder magnetische Teilchen aus dem Materialgemisch entfernt. Dies erhöht die Materialreinheit und schützt nachfolgende Anlagen vor Beschädigungen. Technische Daten: Schredder: ✔ Leistung: 30 kW ✔ Wellenlänge: 870 mm ✔ Wellendurchmesser: 270 mm ✔ Wellenumdrehungen: 80–120 U/min ✔ Anzahl Schneidmesser: 38 ✔ Granulatgröße: 10–50 mm ✔ Durchsatz: bis zu 8 m³/h* ✔ Einfüllöffnung: 2031 x 1565 mm ✔ Gewicht: 2450 kg Z-Förderband: ✔ Frequenzumrichter (verstellbare Fördergeschwindigkeit) ✔ Überbandmagnetabscheider ✔ Länge: 6500 mm Bledpfx Agstpwlro Ted ✔ Breite: 350 mm ✔ Förderleistung: 0,5 kg/s ✔ Leistung: 0,25 kW ✔ Transporträder 1 Jahr Garantie oder 1.000 Betriebsstunden

Stanje: novo, Leto izdelave: 2026, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 38 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 8 m3/h* Bledpjiq U Ayefx Ag Tjd ✔ Vsipna odprtina: 2031 x 1565 mm ✔ Dimenzije D/Š/V: 3,21/1,97/2,04 m ✔ Teža: 2450 kg 2 leti garancije ali 2000 delovnih ur

Stanje: rabljeno, Holz Her Auriga 1308 XL Compact model – Edge thickness 0.4 – 8 mm SPS touchscreen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue dosing control, including cleaning routine Pre-milling unit for jointing before the gluing station Fully automatic edge magazine for coil and strip material GLU JET adhesive application station (cartridge) + PU gluing, with sensing nozzle Workpiece height 8–60 mm High-gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic adjustment of end saws for 0–10° bevel cuts Multifunction milling unit 1827 MOT4: Flush trimming up to 8 mm, radius milling – bevel milling 15° with NC axes Contour milling unit – corner rounding for edge thickness up to 3 mm, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for bevels and radii with 2 scraper holders via NC axes Flat scraper unit FK701 with pre- and post-sensing – finishing Buffing unit – polishing Spray equipment at the infeed and outfeed Spray device with slip agent for high-gloss edges Complete DIA tooling included Bjdeyh Ilyopfx Ag Told First delivered 2021 Machine in TOP CONDITION from shutdown/closure – small business Available ex stock Lieboch

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 67.003 km, moč: 106 kW (144,12 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 2.790 kg, lastna masa: 1.840 kg, največja dovoljena obremenitev: 950 kg, prva registracija: 05/2024, naslednji pregled (TÜV): 02/2028, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 1.300 mm, emisijski razred: Euro 6, barva: bela, število sedežev: 3, število prejšnjih lastnikov: 1, Oprema: ABS, airbag, celoletne pnevmatike, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, klimatska naprava, računalnik na krovu, registracija tovornjaka, registracija vozila, servovolan, sistem za imobilizacijo, tempomat, Special equipment: Bjdpfxsymzbbj Ag Tjld Driver Assistance Package: Drive Assist, wooden flooring in the load compartment, and standard side paneling Further equipment: Driver/passenger airbags, audio controls on the steering wheel, multimedia audio system, electrically adjustable and heated exterior mirrors, load compartment/luggage area floor covering (rubber), on-board computer, brake assist, DAB tuner (digital radio reception), double front passenger bench with storage compartment, automatic headlight activation, driver assistance system: automatic headlight control incl. high beam assistant, driver assistance system: autonomous emergency braking assistant, driver assistance system: hill start assist (HSA), driver assistance system: high beam assistant, driver assistance system: drowsiness detection sensor, driver assistance system: emergency braking assistant, driver assistance system: safety system with automatic emergency call (ERA GLONASS/eCall), driver assistance system: lane departure warning, driver assistance system: traffic sign recognition, 2 vehicle keys (both foldable), electric front windows with anti-trap protection, rear wing doors without glazing, body/construction: van, body variant: vehicle length L3, solid bulkhead, lumbar support for left front seat, adjustable steering column, headlight range adjustment, model refinement, engine 2.0 L - 106 kW diesel, rear park pilot system, wheelbase 3,275 mm, tire repair kit, tire pressure monitoring system, low emission according to Euro 6e emissions standard, windscreen wiper with interval control, halogen headlights, right sliding door, SCR system (AdBlue technology), visibility package, mechanically adjustable right front seat, seat trim/upholstery: fabric, steel rims 7x16, start/stop system, 12V socket in the boot/load compartment, 12V socket in the center console, tie-down hooks in the load compartment, seatbelt warning system for passenger side, seatbelt warning system for driver side.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm Blsdpeg Umrmofx Ag Tjd 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, For sale is a used Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The used machine is in good condition. Technical specifications: - Center height: 280 mm - Swing over bed: 550 mm (up to 1,000 mm with optional extension bed / outboard turning attachment!) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock: Morse taper MK2 - Frequency inverter (3 belt speeds): - Stage 1: 60 – 1,200 rpm - Stage 2: 100 – 2,200 rpm Bsdpoyi E Rlsfx Ag Teld - Stage 3: 150 – 3,700 rpm - Quill travel: 150 mm (with scale) - Tailstock quill: trapezoidal thread with quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, turning, woodturning tools, woodturning, machine Reference: B18OO

Stanje: rabljeno, Leto izdelave: 2001, Lokacija skladišča: Dobavitelj Bodpfeym D Eiex Ag Teld

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1310370, stružna dolžina: 240 mm, premer struženja: 180 mm, največja hitrost vretena: 6.000 obr/min, Premer palice (maks.): 35 mm, model krmilnika: FANUC SERIES oi-TD, Žádná minimální cena – zaručený prodej nejvyšší nabídce! Podáním nabídky jste povinni zajistit včasné vyzvednutí stroje buď v termínu od 11.05.2026 do 13.05.2026, nebo v termínu od 18.05.2026 do 21.05.2026! TECHNICKÉ ÚDAJE Max. průměr soustružení: 180 mm Max. délka soustružení: 240 mm Velikost sklíčidla: 6 palců Bledpeym Ab Nsfx Ag Ted Max. průměr obrobku nad ložem: 320 mm Max. průměr tyče: 26/35 mm Průměr ložisek vřetene: 75 mm Max. otáčky vřetene: 6 000 ot./min. Pojezd osa X: 120 mm Pojezd osa Z: 280 mm Rychloposuv osa X: 12 m/min Rychloposuv osa Z: 18 m/min DETAILY STROJE Řídicí systém: FANUC SERIES oi-TD Provozní napětí: 200 V Frekvence: 50/60 Hz Připojení: 23 kVA Rozměry & hmotnost Rozměry (D x Š x V): 1 500 x 1 500 x 2 200 mm Hmotnost: 2 000 kg VYBAVENÍ 12pozicový revolver na nástroje Externí reference: Elos – Lot 7

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, X working range: 6,170 mm Y working range: 1,380 mm Z working range: 155 mm Main motor power: 7.5 kW Maximum spindle speed: 24,000 rpm Aggregate heads 4th axis C axis Tool changer positions: 10 Vertical drilling heads: 20 Horizontal drilling units X: 6 Bjdpfxer E A U Ie Ag Tsld Horizontal drilling units Y: 2 Arm structure Worktable Console table Number of rails: 10 Positioning aid Vacuum pump capacity: 2 x 125 m³/h Chip conveyor

Stanje: rabljeno, Leto izdelave: 2009, automatic central lubrication milling unit 7833, 2-stage, 11 kW power, 1,000 - 24,000 rpm; 1 double drilling spindle in X direction; 1 integrated saw unit for sawing/grooving in X direction, traversing; tool changer 7892, 16-position linear pick-up changer, permanently installed on the right side of the machine; laser pointer set: 2 laser pointers for positioning the vacuum cups or referencing the workpiece contour; automatic console and vacuum cup positioning; 6 consoles incl. 3 vacuum cup mounts per console, incl. 1 vacuum cup 80x80 mm per mount; incl. 4 loading aids; additional processing zones at the front for 6 consoles; base unit pneumatic system for frame clamping system 7974 (6 consoles); 2D barcode scanner; video camera in the machining head; vacuum pump 140 m³/h; Vario tool change unit package consisting of: vector axis 7899 (C-axis) fully interpolating, 0-360° infinitely rotatable, incl. pneumatic tool changer 7890, single-position magazine, pick-up system, fixed installation in front of the machine frame on the left; tool changer 7894, 6-position pick-up magazine especially for Vario tool change tool holders, fixed installation in the left side of the machine frame, can be equipped with collet chucks Vario Grip KSJ F 40, 3 pcs. tool holders Vario Grip KSJ F 40 (for collets 2-20 mm ER32), 1 pc. saw blade adapter, 3 pcs. collets per customer selection, 1 pc. carbide circular saw blade max. 220 mm diameter. Bjdpfjvvi Spex Ag Told Location: Nattheim

Stanje: rabljeno, največja dovoljena obremenitev: 2.739 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 4.070 mm, širina tovornega prostora: 2.030 mm, skupna širina: 2.160 mm, skupna višina: 745 mm, A24. GW26G000233, Bjdpfx Ajyn Ud Eeg Teld * Izvedba za 100 km/h z vgrajenimi blažilniki * Pametno pospravljene, lahke aluminijaste nakladalne rampe pod tovorno površino za udobno nakladanje in razkladanje. * Preprosto jih potegnite iz vodila in varno obesite. * Stranska perforirana ograja z več dodatnimi pritrdilnimi točkami zagotavlja varno pritrditev tovora. Prikolica za prevoz vozil proizvajalca STEMA, tip Carrier XL - SHA .2, reg. št.: L-AH 138, skupna dovoljena masa: 3.500 kg, z nosilnimi oporami za težke obremenitve, nakladalne rampe za registrsko tablico, z vzvratno zavoro, 100 km/h Vozilo ni obnovljeno, pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, Leto izdelave: 2025, MarkerHero EXCLUSIVE XL Industry 4.0 – Model 2025 For metal, plastics, and much more! • EZCAD 3 (genuine 64-bit control card) supporting up to 4 axes • Compatible with Windows Professional 64-bit • Professional MOPA fiber laser source JPT with 20 watts power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color annealing marking) • Scanner unit “DigiScan Eco 10” for high detail and precision • T-slot base plate from Isel for easy fixture and positioning of your workpiece • Front sliding door with large viewing window and certified laser safety glass made in Germany, including monitoring -> Door opening: 450 mm • Left-side sliding door with monitoring for processing long parts -> Door opening: 400 mm • Clear control panel with Siemens push-buttons • Scan area approx. 100 x 100 mm (optional: 150/200/300 mm) • Motorized height adjustment with focus finder • Free-standing housing made from aluminum profiles, with two manual doors for simple, user-friendly, and safe marking; Laser Class 1 • Cabinet base with integrated Rittal control cabinet and extraction compartment • LED workspace lighting made in Germany • High-performance mini PC with 32 GB RAM • 21” TFT touchscreen for fatigue-free operation • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel files, network, or database! • Laser parameter finder matrix via 2 parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity – commands can be transmitted to the software via TCP protocol, enabling easy integration with external components (such as camera position detection, etc.) • Industry 4.0: Machine status can be processed at any time via TCP/IP protocol • I/O ports for automation • 3D preview function for rotary axis processing • Performance increase of up to 50% thanks to 64-bit technology • Improved stability • Optionally control up to 4 axes WITHOUT switching via PLUGins • Optional DEEP engraving (slicer software with Z-axis control) • Engraving speed for hatching increased through new algorithms • Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with dual laser pointers for visual focus verification • Connection port for external exhaust systems • Software suitable for Windows 10 • USB cable for PC connection • Operating manual and software in German Optional features include: => IPG or SPI fiber laser sources in various power ratings => Scanlab components => Suitable extraction systems => Automation for part handling, conveyors, and more! => 3D marking capability => Automatic focus adjustment via special laser sensor => Rotary unit in various versions Blodpfewga Hwex Ag Tjd => Motorized X and Y slides => Interlock system allowing operation WITHOUT a protective enclosure, using only personal protective equipment for bulky items Training included in Schweinfurt! Our engraving lasers are manufactured at our facility in Schweinfurt, allowing for customized solutions at any time! => Made in Schweinfurt! Images may feature optional equipment. We are your partner for laser marking solutions, from manual to fully automated systems. We would be pleased to provide you with a quote.

Stanje: novo, Leto izdelave: 2025, Model 2025 for Industry 4.0! Laser Marking System for: → Marking → Annealing of metals → Marking a variety of materials → Deep engraving Ultra-precise and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width upon request). Easy operation and handling! Our Exclusive XL Laser Marking System is distinguished by: • Professional JPT MOPAfix fiber laser source with 20 or 30W output • 1064nm, 20-400 kHz (ideal for perfect annealing engravings) • “New Generation ECO” scanner unit • 19" PC control, no external card required! • Extra-large viewing window with certified laser safety glass • Marking area approx. 150 x 150 mm • Motorized height adjustment • Full housing with 4 wheels • “Weightless” lifting door for safe marking EZCAD III Software: • Barcode and QR code support • Serial number functionality • Batch scanning from Excel file • Laser parameter finder using a 2-parameter matrix • TCP/IP connectivity for external components • Industry 4.0: System status can always be processed via the TCP/IP protocol • Input/output channels for direct communication • New look and feel with a fresh design • Even more intuitive and user-friendly interface • 3D preview for rotary axis applications • Up to 50% performance boost thanks to 64-bit architecture • Improved stability through integrated control card • Optional control of up to 4 axes (integrated) • Optional DEEP engraving with Z-axis • Enhanced algorithms for rapid hatching • Completely redesigned Galvo generation • Dual laser pointer for checking focus position • LED illumination of the marking area • Connection facility for external extraction units • Start button and emergency stop on the housing Bljdpfx Aod S H Nveg Tsd • USB and network connection for data access • Operating instructions and software in German • Protective enclosure in accordance with Laser Class 1 • Includes 4 hours of training in our training center (max. 2 persons) Need something customized? No problem. Choose from our extensive range of accessories: → Camera systems for object detection → Fiber laser sources in almost any variation → Motorized and automatic height adjustment → Scanlab equipment → Automation for component loading → Conveyors for infeed and outfeed → 3D marking and engraving functionality → Automatic focus adjustment → Rotary unit → Motorized slides → Interlock system for marking WITHOUT enclosure, using only PPE (personal protective equipment) for bulky parts Our engraving lasers can of course be customized in design and size! → Made in Schweinfurt! Images may include optional features! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraving machine, laser marking system, laser marking equipment, marking laser Keywords: laser engraving machine, laser marker, laser marking, laser engraving, laser marking equipment, laser marking system, marking laser, Markierheld

Stanje: novo, Leto izdelave: 2025, Model 2025 – Ready for Industry 4.0! Laser Marking System for: → Marking → Annealing of metals → Marking a wide range of materials → Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width available). Simple operation and handling! Our exclusive XL laser marking system features: • Professional fiber laser source: JPT MOPAfix, 20W or 30W output • 1064nm, 20-400 kHz (ideal for perfect annealing marks) • "New Generation ECO" scanner unit • 19" PC control – no external card required • Extra-large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • Motorized height adjustment • Full enclosure with 4 castors Bljdpsd Athmefx Ag Ted • "Weightless" lift-up door for safe marking EZCAD III Software: • Barcode and QR code support • Serial numbering function • Batch scanning from Excel file • Laser parameter finder using 2-parameter matrix • TCP/IP connectivity for external components • Industry 4.0: System status processing at any time via TCP/IP protocol • I/O ports for direct communication • New look and feel with fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Up to 50% performance boost with 64-bit architecture • Improved stability with integrated control board • Optionally control up to 4 axes (integrated) • Optional deep engraving with Z axis • Enhanced algorithms for rapid hatching • Completely redesigned Galvo generation • Dual laser pointer to check focus position • LED illumination of the marking area • Connection ports for external extraction systems • Start button and emergency stop (E-Stop) on the housing • USB and network connectivity for data access • Operating manual and control software in German • Protective enclosure, Laser Class 1 compliant • Includes 4 hours training at our training center (max. 2 persons) Need a tailored solution? No problem. Choose from our extensive range of accessories: → Camera systems for object recognition → Fiber laser sources in almost any configuration → Motorized and automatic height adjustment → Scanlab equipment → Automation options for component handling → Conveyors for infeed and outfeed → 3D marking and engraving capability → Automatic focus adjustment → Rotary unit → Motorized slides → Interlock system for marking without full enclosure, using only personal protective equipment (PPE) for oversized workpieces Our engraving lasers can be customized to your specifications for both design and size! → Made in Schweinfurt! Images may show optional equipment! Laser engraving machine, laser marker, laser marking, laser marking system, laser engraving system, laser engraving equipment, laser marking equipment, laser engraving, laser marking, laser engraving unit, laser marking unit, marker laser, marking laser, Markierheld