Prokuwa Plastični Gmbh nakup rabljenega (69.889)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput rate for empty beverage cans with: • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors. Nedeu Th S Sspfx Adyjwb

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) Nedpouvigpefx Adyjwb - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Grinding Wheel Dressing Machine: Easy to operate, robust, and precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of user-friendly operation and exceptional stability. The solid granite bed ensures maximum precision and durability, while the intuitive controls optimize efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you both time and money. Nedpfxjubbrts Adyjwb Ideal for anyone who values reliable performance and outstanding value for money!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 09-009-09-00001-00, skupna višina: 940 mm, skupna širina: 1.160 mm, skupna dolžina: 1.030 mm, širina odpiranja: 330 mm, premer plošče: 1.021 mm, višina plošče: 198 mm, višina mize: 730 mm, Product description: Nedpfx Asq Tb Ensdyjwb With various diameters and storage capacities, the rotary table offers optimal loading, removal, and buffering options for packaging. The rotary table is positioned at the end of your line to collect products and serves as an intermediate buffer. The buffer is flexible and can be removed from or integrated into the line at any time with minimal effort. The rotary table is easy to maintain, economical, and energy-efficient. The speed is adjustable.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23-034, skupna širina: 1.100 mm, skupna dolžina: 4.570 mm, skupna višina: 2.060 mm, A packaging machine from Smartvac that was exhibited at trade fairs. - Bottom film width: 320(+2/+4) mm - Top film width: 302(+/-1) mm Nwsdpfeq H R Tajx Adyeb - Draw-off length: 220 mm - Forming depth: 100 mm - Machine configuration for vacuum packaging Maximum pack size: 281 x 202 x 100 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The fish mask form mask machine offered here combines efficiency and safety features with an optimized fit. These product features are achieved, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touchscreen for easy and clear operation, as well as an optimized and robust steel unwinding unit. Process steps at a glance: - Feeding of the filter fleece via an edge control system, as well as nose wire feeding, uniform welding of the mask followed by folding and separation of the base body. - The next process step involves the application of the ear loops using ultrasonic technology. Optional features such as camera inspection, stacking unit, and a flowpack machine can be ordered additionally. In detail: - Welded unwinding unit with a total of 4 manual expansion shafts, magnetic powder brakes, and edge control system for filter fleece feeding. - Nose wire feeding is carried out by an additional unwinder. - The use of discs combined with slim aluminum profiles provides excellent visibility into production while fully protecting the operator. - Upon request, we offer various printing systems to print mandatory information on your mask according to legal requirements. - The use of ultrasonic technology and durable materials such as titanium ensures increased machine availability compared to conventional materials. - High precision thanks to servo-driven motors. - Uniform material infeed and guiding, as well as separation by a rotary cutter with lateral scrap discharge. - High-resolution, user-friendly HMIs with touchscreen. - Mask body welding via ultrasonic technology with subsequent folding die and welding of the upper and lower surfaces. - Precise separation of the mask from scrap using a rotary cutter, followed by mask discharge and lateral scrap removal. - Subsequent ear loop embossing using ultrasonic technology. Nedoh Uuhcjpfx Adyowb - Optional: Camera inspection with automatic good/bad part detection - Optional: Discharge to a stacker - Optional: Discharge to a flowpack station for individual mask packaging Performance Data & Dimensions: - Power consumption: approx. 4-5 KW during operation - Power supply: 220 V / 50 Hz - Output: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200 x 5000 x 1800 mm (LxWxH) - Mask dimensions closed (longest and widest points): 205 x 82 mm (+/- 2 mm) We would be pleased to provide you with an individual, high-quality system offer. To do so, please provide us with your company details in advance.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. The minimal drop height effectively prevents product damage, ensuring the quality of your goods—even with delicate items. Flexible and Efficient Operating Principle At the core of our technology is a simple yet highly effective operating principle: Products are transported via linear conveyors or vibrating channels and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage filtering (coarse / medium / fine), individually programmable - Tool-free changeover - Intuitive design allows quick retooling and straightforward cleaning - Gentle product handling: reduced drop height protects sensitive and fragile products - Versatile usage: suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: components made from stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20g to 2000g - Accuracy: up to 0.5g, depending on product Nsdpfswymlyox Adyowb - 4.5-litre weighing bucket - Max. speed: 30 weighments/min (2-head scale) - Material: Stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (single-head, 2-head, 4-head, incl. mixing systems for 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control directly at the machine or via network remote control, upgradeable to live camera) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Specialized scales for stick-shaped products (e.g. pretzel sticks), including product alignment - Weighing systems for large products such as salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (single-stage or two-stage weighing) and powder filling (accuracy from 0.3%–1%, including automatic recalibration when connected to a weighing system) - ...and more.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10025345, Leto izdelave: 2016, obratovalne ure: 2.380 h, nosilnost: 320 kg, dvižna višina: 2.995 mm, gradbena višina: 1.385 mm, kapaciteta baterije: 194 Ah, napetost baterije: 24 V, zunanji obračalni polmer: 1.205 mm, Tip prednje pnevmatike: superelastične pnevmatike (ne puščajo sledi), tip zadnje pnevmatike: superelastične pnevmatike (ne puščajo sledi), skupna masa: 990 kg, lastna masa: 670 kg, skupna višina: 4.075 mm, skupna dolžina: 1.525 mm, skupna širina: 750 mm, transportna dolžina: 1.525 mm, transportna širina: 750 mm, vgrajeni 230 V polnilec zelo okreten, gre skozi vsaka standardna vrata dvižna višina 5.000 mm (podatek proizvajalca) tehnično v zelo dobrem stanju sledi uporabe glede na starost, Nsdsxzdv Nspfx Adyowb Naprava je bila uporabljena pri prehodu s klasične na LED osvetlitev in je delovala zelo zanesljivo.

Stanje: rabljeno, Z očitno neuporabljene nerjaveče posode iz jekla 304, proizvedene pri ROLEC Prozess und Brautechnik GMBH. Novo, letnik 2015. Skupna prostornina 160.000 litrov, uporabna prostornina 120.000 litrov. Največji dovoljeni delovni nadtlak 0,9 bara (15 PSI). - Kot stožca: 70° - Dvojni plašč. Njdpfxex R Uytj Adyswb Posoda: Material: nerjaveče jeklo 1.4301 (304) - Nosilci posode: 4 nerjaveče noge s talnimi ploščami. Hlajenje: Hladilna tekočina: glikol - Temperatura vode: -3°C - Hladilni odsek stožca: 1 - Hladilna površina stožca: 12 m² - Hladilna površina stranskih sten: 48 m². Dimenzije posode: Notranji Ø: 3900 mm - Zunanji Ø: 4100 mm - Višina plašča: 9000 mm - Višina iztoka iz stožca: 1000 mm - Skupna višina: 13.600 mm (vključno s platformo in priključki) - več različnih dovodov in iztokov. Specifikacije: Kapaciteta: 31.700,6 galonov Premer: 13,12' Višina: 44,62' Tip nerjavečega jekla: 304 Tip dna: stožčast Orientacija: vertikalna Podpora: 4 nerjaveče noge s talnimi ploščami

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch Nwedsndn Agjpfx Adysb • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) Nwjdpfx Ajng Exaedyob • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or oil collection tray Nwodpfslhqd Rex Adyob Location: Austria Available from: 30/01/2026

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13-3188, skupna dolžina: 160.000 mm, skupna višina: 3.000 mm, skupna širina: 9.000 mm, temperatura: 230 °C, volumenski pretok: 100 m³/h, Powder Coating System ARNO HERING PTR 15-45-SE (Year 2006) For sale is a complete powder coating system from ARNO HERING (model PTR 15-45-SE), manufactured 05/2006, comprising application booth, curing oven, as well as crane track/support racks (hanging fixtures). The equipment is from ongoing production and is suitable for coating metal components and assemblies. Highlights / Features (components): - Application booth (powder application) - Curing oven - Crane track / manual overhead conveyor system (guided via crane track) incl. support/hanging frames - Documentation/wiring diagrams: to be supplied if available Technical data (according to nameplate): - Type: PTR 15-45-SE - Year: 05/2006 - Machine number: 13-3188 - Max. drying temperature: 230°C - Minimum exhaust air volume (20°C): 100 m³/h - Max. permissible powder quantity: 10 kg/h Notes: - Inspection on site possible by appointment. Nwsdpex Squ Aofx Adyob - Loading/disassembly: by arrangement (potentially by buyer). - Sale ex location; subject to prior sale. We offer this used ARNO HERING PTR 15-45-SE powder coating system, year 2006. - Type: PTR 15-45-SE - Year: May 2006 - Machine number: 13-3188 - Maximum drying temperature: 230°C - Minimum exhaust air volume at 20°C: 100 m³/h - Maximum allowable powder quantity: 10 kg/h If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 50 h, skupna dolžina: 1.000 mm, skupna višina: 500 mm, skupna širina: 500 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 550 kg, temperatura: 280 °C, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 28 °C, natančnost pozicioniranja: 0,1 mm, debelina stene: 1 mm, zahteva za prostor dolžina: 2.715 mm, potrebna višina: 2.765 mm, potrebna širina: 2.170 mm, High-Performance Materials: Best-in-Class Print Heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially developed extruder delivers a high level of detail fidelity with layer thicknesses starting from 0.1 mm on objects up to one meter in length. This enables more options for perfecting the mechanical properties of a component. Optimal Printing Temperatures: The Temperature-Controlled Build Chamber The closed, temperature-regulated print chamber of the STUDIO G2 creates ideal conditions for printing with industrial-grade materials. Transparent doors provide operators with the ability to visually monitor the printing process, offering safe and easy access to the print bed. User-friendly features, such as automatic pausing when the housing is opened, ensure a smooth and safe printing process. Independent Temperature Control: Heated Filament Chambers The integrated heated filament chambers in the STUDIO G2 ensure that printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the build chamber. Nwsdpfx Adowgbcyeyob Optimal Printing Temperatures: Rapid-Heating Print Bed Minimal preparation time thanks to a rapidly heating print bed. Increased bed temperatures up to 100°C improve adhesion for a wider range of materials. The new inductive sensor enables fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and provides presets for all BigRep-compatible materials, ensuring a fast and seamless start to printing. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format prints. Large Enough for Every Idea: The Spacious Print Area Create space for innovation with the large print volume of the STUDIO G2, measuring 500 mm x 1000 mm x 500 mm, housed in a compact enclosure with features optimized for the rapid production of large-format, industrial-grade parts in high resolution.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, moč: 9,5 kW (12,92 KM), vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Docking Station podjetja Kraham Maschinenbau GmbH. U-oblike DS10 Nsdpjx Eiqmefx Adyswb Docking Station je namenjena dovajanju in premikanju palet, GLT, kovinskih zabojev ali polovičnih GLT. Naprava je bila načrtovana za povezavo z logističnimi vlaki. Ima dovajanje in vračanje materiala ter je zgrajena v obliki črke U. !!!NAPRAVA NI BILA NIKOLI UPORABLJENA IN JE KOT NOVA!!! Prevoz in stroške pošiljanja krije kupec. Naprava bo pripravljena na nakladalni rampi. Za več informacij, fotografij ali dokumentov me kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC blade technology for 2D cutting of leather, fabric, technical textiles, foam, and other sheet-type, semi-flexible, or rigid non-metallic materials Features of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold equipped with a driven rotary knife, an electrically oscillating knife, and a milling unit (including extraction system) • Multifunctional tool head holds up to 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard delivery includes gray conveyor belt table. Green-blue exchange conveyor available (offers high contrast for dark materials) Additional tools are available upon request: • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Driven Rotary Tool • UCT Universal Cutting Tool (drag knife) • KCT Kiss-Cut Tool • CTT Creasing Tool • V-Cut Angle Cutting Knife • Printer mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system User-friendly • Easily interchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade change • Vacuum zones can be activated at the touch of a button Rapid return on investment Nodpfoif Ek Rsx Adyswb • Low operating costs with high added value • Optimal material utilization possible with nest expert software modules (not included) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeat accuracy ±0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (optionally expandable with appropriate unwinder) • Rapid ROI (Product photo for illustration purposes) The machine is CE-certified.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 35 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002-045, Used CNC Cutter/Plotter – Cutting Area X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system featuring CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other sheet-type, semi-flexible or rigid non-metallic materials. Equipment of the used machine: • 1 cutting gantry and 1 multifunctional tool head The machine is sold with a powered rotary knife and a punching tool. • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipment includes a grey conveyor belt table. Turquoise exchange conveyor available (offers high contrast for dark materials) Additional tools can be retrofitted (on request): • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Powered rotary knife Njdpofnlkwofx Adyowb • UCT Universal cutting tool (drag knife) • KCT Kiss-cut tool • CTT Creasing tool • V-Cut Angle cutting tool • Printer mark detection • Camera-based registration • Punching tool for notches or holes • Milling tool with extraction device User-friendly: • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade changes • Vacuum zones can be activated with a click Fast payback: • Low cost with high added value • Optimum material utilization through nest expert software modules (not included) • High speed • Consistent precision Technical Data: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeat accuracy: +/- 0.25 mm • Capable of single or multi-layer cutting • Suitable for both sheet and roll material (can be retrofitted with suitable unwinder) • Quick return on investment (Product photo for reference) The machine is CE certified.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-078, Multifunctional CAM cutting system using pure waterjet technology – without abrasives (waterjet cutting machine) 2 cutting bridges with 2 cutting heads, including Z-axis 1 head with bevel (angle) cutting capability 1 head for 2D cutting Suitable for cutting foam, plastics, technical textiles, and other planar, flexible, non-metallic materials. Maximum material passage height: 140 mm Cutting area in X and Y: 2,850 mm x 2,750 mm Protection class: IP54 Njdpfx Aofhgvwedyewb Includes BFT 40.22 high-pressure pump (Product photo serves as an example) The machine is CE-certified.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025-078, delovna širina: 1.600 mm, delovna višina: 100 mm, največja širina rezanja: 1.600 mm, število mest v zalogovniku orodij: 2, Used machine CNC Cutter/Plotter Cutting area in X and Y: 1,500 x 1,600 mm (demonstration machine) Multi-functional CAM cutting system with CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other sheet-type, semi-flexible or rigid, non-metallic materials. Features of the used machine: • 1 cutting bridge and 1 multifunctional tool head • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipped with grey conveyor belt table • Max. material height: 100 mm Further tools can be added (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Print mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system User-friendly: • Easily changeable cutting tools, "PLUG & CUT" • Intuitive user interface • Quick blade change • Vacuum zones activated at the click of a button Fast return on investment: • Low costs with high added value • Optimum material utilization with nest expert software modules (not included as standard) • High speed • Consistent precision Specifications: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (extendable with optional unwind unit) • Fast return on investment Nedswgc I Ropfx Adyjwb (Product photo for illustration purposes) The machine is CE certified.

Leto izdelave: 2024, Stanje: kot nova (razstavni stroj), Universal Testing Machine PM5 Force: 5 kN Crosshead Stroke: 520 mm Nwjdpfxsd R Dqbs Adyeb Test Chamber Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1-500 mm / min Return Speed: 700 mm / min Load Cell: 5 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for „quick testing“ without the need for a PC. For tests requiring data storage and curve recording, our basic software provides options for control and evaluation. This allows for generating various test procedures and creating a test report. In addition, you can further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Nwjdpfefdzupjx Adyob Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" even without a PC. For tests requiring data storage and recording of the load-displacement curve, our basic software offers you the ability to control the machine and evaluate results. This enables you to generate various testing sequences and create a test report. Additionally, you can export raw data for further processing in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips/Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, Stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Nsdpfed R Dp Ejx Adyjwb Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Universal Testing Machine PM3 Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick tests" without a PC. For tests that require data storage and curve recording, our basic software offers you the functionality for control and evaluation. Nsdpfed R Dpuex Adyjwb This enables the creation of various test sequences and the generation of a test report. You also have the option to further process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and Fixtures: Compression platens, bending fixtures, shear testing devices, wedge grips, scissor grips, peel grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Test space: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN including evaluation electronics and basic software. Our testing machines can be operated stand-alone via a numeric keypad, allowing for “quick tests” to be performed without a PC. For tests requiring data storage and curve recording, our basic software enables precise control and evaluation. Noded R Dpmspfx Adyowb The software allows the generation of various test routines and the creation of test reports. Furthermore, you have the option to process raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips & fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour Nwedpex A U Ncofx Adyob – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.