Prevajanje Odru nakup rabljenega (66)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), kapaciteta rezervoarja za gorivo: 2.000 l, obratovalni tlak: 10 letvica, vrsta hlajenja: zrak, Complete compressed air system consisting of: Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 operating hours – 15 KW – Max 13 BAR Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, approx. height 2.15 m Almig AKC300 Activated Carbon Adsorber incl. condensate drain valve, SPX Flow Technology EDDSU2 System is fully functional and has been regularly serviced. Already dismantled and packed on a pallet. Very good condition, see pictures. Lsdswz Ul Dopfx Ah Djhn Forklift available for loading on site. Collection only by appointment in 75053 Gondelsheim. Shipping by forwarding agent possible, please inquire with postal code.

Stanje: pripravljen za uporabo (rabljen), Rexroth 3 DS 2 EH 10-20/A2X 40 Z8 servo pressure control valve, used, normal signs of wear, 100% functional, scope of delivery as per photos Lhedpsi Ecn Uofx Ah Djn

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lhedpfx Aeu Nyqtjh Den

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 20.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 4.500 kg, moč: 45 kW (61,18 KM), kapaciteta rezervoarja za gorivo: 2.000 l, obratovalni tlak: 10 letvica, vrsta hlajenja: zrak, Complete compressor room Atlas Copco GA75VSD, year 2013, 46,100 operating hours - 75 kW - max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, year 2007, 21,000 operating hours - 45 kW - max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, year 2013 refrigeration dryer Dimensions: W120 x D110 x H100 cm Lodev Snn Iepfx Ah Dohn MaBe 2000L tank, year 2016, height 2.85 m Incl. oil-water separator The plant is currently still in operation, so hours may vary. The system is fully functional and has been regularly serviced. Service kits and oils are included. Very good condition, see pictures. Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with ZIP code.

Stanje: pripravljen za uporabo (rabljen), Rexroth 3DS2EH10-21/A2X40Z8M servo pressure control valve, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Lhjdpfxji Ecpcs Ah Den

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lhjdju Nyq Hjpfx Ah Den

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lodsu Nyqaopfx Ah Dohn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 1-Farben-Flexodruckmaschine Lodpfx Ahstuvuue Dohn Hersteller: Altinisik Makina Modell: AA1290 Baujahr: 2021 Format: 1290 x 1800 mm Mit Skipfeed: 1550 mm min. 350 x 750 mm Verarbeitbare Kartondicke mit Sonderdicke bis zu 28 mm Geschwindigkeit: bis zu 7.000 Bögen/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Dodatna oprema Mobilna konzola s integriranim PC 'eye-M': 21,5" LCD u boji s 16/9 touchscreen zaslonom / AAR sustav protiv prianjanja ljepila: smješten ispred jedinice za poravnavanje rubova ploče / Raspršivač: uređaj za hlađenje i obradu ljepila na rubu, pozicioniran radi završne obrade / Utovarivač za uske komade: uređaj za olakšano ručno utovarivanje uskih kvadratnih komada Ova SCM STEFANI MD kantiralica proizvedena je 2021. godine. Nudi automatiziranu obradu rubova za masivno drvo debljine do 15 mm (uz opciju za 22 mm). Stroj uključuje posudu za ljepilo "SGP" pogodnu za EVA i PUR ljepila, što omogućuje idealan spoj. Sustav upravljanja 'Startouch' ima 12” touch-screen ekran, prilagodljive radne programe i grafičku simulaciju obrade. Idealan je za visoku produktivnost uz brzinu rada do 25 m/min. Kontaktirajte nas za više informacija. Lhodpfoxn Ux Uex Ah Don Područja primjene: Obrada rubova (kantiranje)

Leto izdelave: 2016, Stanje: dober (rabljeno), Codimag VIVA 340 Aniflo • Baujahr: 2016 • Druckbreite: 340 mm • Papierabwicklung • Corona-Einheit • Bahnreinigung • 6 x Offset-Druckwerke Lhedpfotnhyqox Ah Djn • Heißfolieneinheit • 2 x Flexodruckwerke • Bahnkantensteuerung • Kühleinheit (Chiller) • Registerregelung • Papieraufwicklung

Stanje: skoraj kot novo (rabljeno), konfiguracija osi: 2 osi, skupna masa: 18.000 kg, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prva registracija: 05/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, medosna razdalja: 1.310 mm, številka stroja/vozila: 412, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Chassis Central axle steel frame welded construction in weight-optimized lightweight design with tipping brackets and rear tipping shaft; Plug-in lock for tipping body with cross safety Drawgear Cranked drawbar with height-adjustable heavy-duty screw-type towing eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support device Front: 1 mechanical landing gear with crank on left in direction of travel, Manufacturer according to factory selection, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, offroad version, automatic brake adjusters Axle spacing 1,310 mm Lsdpolipccjfx Ah Dshn Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, brand according to factory selection (road profile) 4 steel rims 11.75 x 22.5, offsetless, silver Without spare tyre Without spare rim(s) Without wheel nut caps Brake system/Suspension Brake system according to EU Directive 71/320 or ECE R13 Two-line compressed air brake system Brake system by Knorr EBS system 2S2M, 2nd axle sensed RSS/RSP - stability program Spring-actuated parking brake on 2nd axle Aluminum air tanks Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additionally lowering lockout via rotary switch on the trailer Without lift and lowering device Tipping body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on the front wall High-tensile fine-grain steel floor plate 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of high-pivot lashing rings 5 t (distance between rings approx. 2,320 mm) One-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, fold-down with extended swing bolt locks and spring lifting aid, as well as additional pendulum function Side walls left and right with manual central locking 2 rear corner posts in side wall height, fixed on sides Steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed mounting, hooks for dosing chains on rear wall and underbody Rear wall locking = automatic pneumatic latch 2 dosing chains for swinging rear wall With sealing strips Hydraulics Single-line system with hydraulic connection hose and quick coupling SVK DN13 Tipping cylinder for 3-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarp Plastic roll tarp incl. aluminum tube with hand crank, side overhang of approx. 400 mm, without customs closure, toward right in direction of travel with horizontal rope lashing, zigzag lashing at front and rear; Retaining bracket and latch for rolled up tarp on right in direction of travel; bracket for hand crank Tarp fastening on left in direction of travel with 2 tension belts incl. rubber pad

Stanje: rabljeno, Leto izdelave: 2008, Technische Daten: Druckeinheit: - 5 × UV-Flexodruckwerke - 5 × UV-Trockner Bahninspektion: - BST PowerScope 300 – Bahninspektionssystem Abwickler: - Maximale Rollendurchmesser: 1.250 mm - Schwerlast-Ausführung mit pneumatischer Spannwelle und Bahnspannungsregelung - Integrierter Spleißtisch und Bahnlaufregelung Aufwickler: - Maximale Rollendurchmesser: 1.250 mm (≈ 40 Zoll) Lhodpfx Ajxlrd Neh Don Kaltfolien-/Laminiermodul: - Ermöglicht Inline-Applikation von Kaltfolie oder Überlaminierung für hochwertige Etikettenveredelung (Metallisierung, Schutzfilm, etc.) Wendevorrichtung (Bahnwendeeinheit): - Ermöglicht Rückseitenbedruckung oder Laminierung – flexibel für mehrlagige Etikettenanwendungen Remailing-Einheit: - 24” - Unterstützt Nachverarbeitung oder Sekundärbearbeitung von vorgedrucktem Material Zusätzliche Module: - Ben Bunch 500 - Stanzstation EM 510 (für den Betrieb mit Magnetzylinder, spaltverstellbar) - Querschneidzylinder (Inline-Formattern oder Perforationen – präzise Längs- oder Querschnitte) - Stanzaggregate (einstellbare Stanzlänge von 12” bis 26”, ideal für Perforierungen, Passermarkierungen oder spezielle Stanzformen inline)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 3.200 h, Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,01 mm, potovalna razdalja osi X: 3.002 mm, pomik osi Y: 1.502 mm, pomik po osi Z: 300 mm, natančnost pozicioniranja: 0,02 mm, teža obdelovanca (maks.): 4.500 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 300 mm, obratovalni tlak: 4.000 letvica, hitrost rezanja: 8.000 mm/min, moč servomotorja: 2.000 W, obremenitev mize: 4.500 kg, priključek za stisnjen zrak: 6 letvica, višina izdelka (maks.): 300 mm, moč: 37 kW (50,31 KM), Oprema: varnostna svetlobna zapora, Stroj: STM 1530 PremiumCut 3D s kompenzacijom kuta 12° Pumpa: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Odličnog stanja, potpuno funkcionalan, kupljen nov u listopadu 2018. Stroj se nalazi u EU, Zagreb, Hrvatska, mogući probni rez kod nas. Samo 3.200 radnih sati pumpe, automatska kontrola tlaka, automatska kontrola abraziva, kompenzacija kuta rezanja, mogućnost nadogradnje s rotirajućim stolom i jedinicom za bušenje za osjetljive materijale, izdržljiv strojni okvir (aluminijska legura + nehrđajući čelik), opremljen visokokvalitetnim komponentama. 1. Sustav vodenog rezanja STM 1530 PremiumCut 3D 12° kompenzacija kuta Robusna CNC glodana, apsolutno otporna na koroziju konstrukcija od aluminija i nehrđajućeg čelika Visokoprecizni robusni pogon zupčastom letvom i zupčanikom s kosim zupcima Premium vodilice X i Y osi s Bosch Rexroth™ s visoko preciznim kugličnim ležajevima i inox kuglicama Troslojni sustav zaštite od nečistoća Radno područje dostupno s 3 strane za jednostavno utovarivanje i istovarivanje Moguće rezanje pod vodom CNC glodani držač obratka s ojačanim okvirom za dijelove do 1.000 kg/m² Isporučuje se s potrebnim mazivima i posebnim alatima za održavanje i servis 1.1 CNC radni hod X os: ..... 1.502 mm Y os: ..... 3.002 mm (most) Z hod: ..... 300 mm A os: ..... 12° B os: ..... +/- ∞ 1.2 Preciznost i brzine pomaka Preciznost pozicioniranja: ..... ± 0,02 mm (po metru na 20°C) Ponovljivost: ..... ± 0,01 mm (po metru na 20°C) Maks. brzina pomaka: ..... 60 m/min Brzina pomaka A osi: ..... 360°/s Brzina pomaka B osi: ..... 360°/s 1.3 Dimenzije i masa Duljina: ..... cca 3.750 mm (uklj. visokotlačna cijev) Širina: ..... cca 4.700 mm Visina: ..... cca 3.400 mm (uklj. visokotlačna cijev) Težina: ..... 1.500 kg (bez vode) 2. Visokotlačna pumpa ECOTRON® 40.37 Maks. konstrukcijski tlak: ..... 420 MPa Maks. dozvoljeni radni tlak: ..... 400 MPa Maks. kontinuirani radni tlak: ..... 380 MPa Maks. protok: ..... 3,8 l/min Pogonska snaga: ..... 37 kW 2.1 Tehničke značajke Hidraulički pogon s aksijalnom klipnom pumpom i hidrauličkom regulacijom tlaka/protoka Lhsdpfxevla U Tj Ah Don Zupčasta pumpa za zasebni rashladni/filterski krug Tlačni pojačivač s pogonskim cilindrom i visokotlačnim cilindrom Pulsacijski prigušivač 2,49 l prema Direktivi o tlačnoj opremi 97/23/EC Priključak za vanjski sigurnosni krug Električne i elektroničke komponente u ormaru za upravljanje Hidraulične i visokotlačne komponente na zajedničkoj osnovnoj šasiji Kompaktna izvedba, sve cijevi spojene i ožičene 2.2 Uključene opcije Automatska regulacija tlaka 50–400 MPa Hlađenje putem izmjenjivača topline ulje/voda Ventil za rasterećenje tlaka s pneumatskim upravljanjem Povratni ventil na dovodu vode Dvostruki filter za prethodnu filtraciju vode Zvučna izolacija Posebni alati za montažu visokotlačnih brtvi, uključujući moment-ključ Ventil za zatvaranje vode Uključeno: stroj, visokotlačna pumpa, upravljačka jedinica (PC u elektroničkom ormariću), abraziv, rezervni dijelovi.

Stanje: rabljeno, Na prodaju: Rabljeni Eufoton Endolift® sustav – izvrsno stanje i potpuno funkcionalan. Uređaj je korišten isključivo u privatnoj dermatološkoj klinici i redovito održavan od strane ovlaštenih servisera. Idealan je za neinvazivne estetske zahvate poput zatezanja kože, smanjenja bora i konturiranja lica pomoću napredne mikrooptičke laserske tehnologije. Specifikacije: • Proizvođač: Eufoton • Model: Endolift® • Godina proizvodnje: [unesite godinu, npr. 2018] • Stanje: Rabljeno, redovito održavano, tehnički besprijekorno • Područja primjene: Dermatologija, Estetska medicina • Uključeni dodaci: [Laserska ručka/vlakna/transportni kovčeg – molimo prilagodite] Lsdpfsw T Rudsx Ah Dshn - Uključeno i 7 komada optičkih vlakana promjera 300 mikrona. Endolift® sustav je CE certificiran i udovoljava svim relevantnim sigurnosnim propisima. Izvrsna je investicija za klinike ili ordinacije koje žele proširiti svoju ponudu neinvazivnih estetskih tretmana.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, x-Pomak 700 mm y-Pomak 650 mm z-Pomak 600 mm Težina mašine cca 7500 kg Mašina je u izuzetno dobrom stanju i omogućava preciznu 5-osnu obradu sa velikim radnim područjem, visokim radnim performansama glavnog vretena i obimnim magacinom alata. Idealno za zahtevne radove glodanja i bušenja – sve tehničke detalje možete pronaći u nastavku. HEDELIUS ACURA 65 5-osni simultani centar za obradu Poziciona tačnost: A=8 µm/1000 mm Heidenhain iTNC640 X osa: 700 mm Y osa: 650 mm Z osa: 600 mm Dimenzije rotaciono-nagibnog stola: Ø 650x540 mm Opseg nagiba: +30° – -115° Maks. opterećenje rotaciono-nagibnog stola: 500 kg Promer smetajućeg kruga: 500 kg Vreteno: 14.000 o/min – SK40 Broj mesta u izmjenjivaču alata: 65 kom Broj mašine: 30056107 Lodpfx Aowmwxqeh Djhn Godina proizvodnje: 2020 tip: ACURA 65 - 40/640/700/12

Stanje: dober (rabljeno), Leto izdelave: 1998, SANJO P 270 - 6C Baujahr: 1998 Bahnbreite: 270 mm 6-Farben-Flexodruckmaschine 1 x Lackierwerk Abwicklung Aufwicklung Einer der Druckwerke ist für den Rückseitendruck ausgelegt, was bei dieser Maschine äußerst selten ist. Lodpegvg A Iofx Ah Dehn Viele Druckzylinder und Rasterwalzen sind im Lieferumfang enthalten. DELAM RELAM Zugspannungsregelung

Stanje: skoraj kot novo (rabljeno), konfiguracija osi: 2 osi, skupna masa: 18.000 kg, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prva registracija: 05/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 1.310 mm, številka stroja/vozila: 174, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Total width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle steel frame welded construction in weight-optimized lightweight design with tipping outriggers and rear tipping shaft Plug-in lock for tipping bridge with cross-over safety Drawbar Cranked drawbar with height-adjustable heavy-duty screw-type towing eye 50 mm (offset approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm – max. 1,000 mm Support device Front: 1 mechanical landing gear with crank left 1 access step bolted on Lhsdpfxop T Ulls Ah Dsn Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road design, automatic brake adjusters Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, brand at manufacturer’s discretion (road tread) 4 steel rims 11.75 x 22.5, zero offset, silver Without spare wheel Without spare rim Without wheel nut covers Braking system / Suspension Braking system to EC Directive 71/320 or ECE R13 Two-line compressed air braking system Brake system brand: Knorr EBS system 2S2M, sensors on 2nd axle RSS/RSP – stability program Spring-actuated parking brake on 2nd axle Aluminium air tanks Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines laid under drawbar Electronic air suspension with automatic lowering via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance / Safety Systems SWIT – Schwarzmüller Intelligent Telematics, service package “BASIC” Data transmission via GPRS Tipper body Steel welded structure, body length 5,100 mm Fixed steel front wall 4 mm, approx. 980 mm high 2 interior and 1 exterior access steps on front wall Special fine-grain steel floor plate 5 mm (Slight floor wave possible due to welding distortion) 5 pairs upward-folding lashing rings 5 t (distance between lashing rings approx. 2,320 mm) One-piece reinforced aluminium hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended swivel latch fasteners and spring-lift aid, additionally side walls on left and right can swing with manual central locking 2 rear corner posts at side wall height, fixed-side mounted Steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed bearing, hooks for metering chains on rear wall and underside of body Rear wall locking = automatic pneumatic lock 2 metering chains for swinging rear wall With sealing strips Hydraulics Single-line system with hydraulic connection hose and quick coupling SVK DN13 Tipping press for three-way tipping, initial lifting force approx. 30 t; 1 retaining cable Tarpaulin Plastic roll-up tarpaulin incl. aluminium tube with hand crank, side overhang of side wall approx. 400 mm, without customs closure, right-hand side in direction of travel horizontal Tarpaulin bow rope lacing, zig-zag lacing front and rear; Stop bracket and lock

Leto izdelave: 2008, Stanje: dober (rabljeno), OMET Varyflex VF 520 Baujahr: 2008. Die Maschine ist sehr gut gewartet und wurde 2020 mit dem neuesten IST MBS7 UV-System nachgerüstet. Allein das Upgrade hatte einen Wert von ca. 100.000 €.  Maximale Druckbreite: 520 mm  8 FLEXO-DRUCKWERKE  Bedruckstoffe: OPP, BOPP, PET, PVC, OPS, Papier, Aluminiumfolie...  Max. Geschwindigkeit: 200 m/min  Druckwiederholung: 304,8 – 838 mm  8 gearlose UV-Flexodruckwerke  Automatische Registerregelung Ljdpfxolxnnls Ah Djhn  E+L Bahninspektion HINWEIS: DIE MASCHINE WIRD OHNE LACKIERWERK UND VERTIKALEN HEISSLUFTTROCKNER VERKAUFT (auf dem Foto mit gelbem Quadrat markiert). Diese Komponenten wurden erst 2019 von uns nachgerüstet und waren ursprünglich nicht Teil der Maschine.

Stanje: skoraj kot novo (rabljeno), konfiguracija osi: 2 osi, skupna masa: 18.000 kg, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prva registracija: 05/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 1.310 mm, številka stroja/vozila: 119, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle steel frame welded construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Plug-in locking system for tipper body with cross-over safety lock Drawbar Assembly Cranked drawbar with height-adjustable heavy-duty screw-type towing eye, 50 mm (offset approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support Equipment Front: 1 mechanical support crank with handle on left in driving direction, Manufacturer at factory’s discretion, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Capacity 9 t/axle, off-road version, automatic brake adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 160K, make at factory’s discretion (road tread) 4 steel rims 11.75 x 22.5, zero offset, silver No spare tire No spare rim(s) Brake system/Suspension Brake system according to EC Directive 71/320 or ECE R13 Two-line compressed air braking system Braking system make Knorr EBS system 2S2M, 2nd axle sensor-equipped RSS - stability program Spring-applied parking brake on 2nd axle Aluminum air tanks Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under drawbar Electronic air suspension with automatic lowering via inductive switch and additionally lowering lock via rotary switch on trailer Without lifting and lowering device Assistance/Safety Systems Axle load display via EBS-CAN bus signal for display on driver’s cab monitor (truck must be pre-equipped accordingly, not a calibrated scale) Tipper Body Steel welded construction Lhjdpfx Ahoinxcqe Djn Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on front wall Special fine-grain steel floor plate 5 mm (slight floor waviness due to welding distortion possible) 5 pairs of high-foldable lashing rings 5 t (spacing between lashing rings approx. 2,320 mm) One-piece reinforced aluminium hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended swivel latch locks and spring lifting aid, also pendulum-mounted Side walls left and right with manual central locking 2 rear corner posts at sidewall height, fixed mounted on the sides Steel rear wall 4 mm (HB400), approx. 980 mm high, pendulum-mounted with recessed mounting, hooks for dosing chains (on rear wall and underside of body) Rear wall lock = automatic pneumatic lock 2 dosing chains for pendulum rear wall With sealing strips Hydraulics Single-pipe system with hydraulic connecting hose incl. SVK DN13 quick coupling Tipper ram for 3-way tipper, initial lift force approx. 30 t; 1 safety cable Tarpaulin Plastic roll-over tarp incl. aluminium tube with hand crank, side overlap approx. 400 mm, without customs lock, on right side in driving direction horizontal rope lashing, front and rear zig-zag lashing; Stop bracket and locking for rolled-up tarp on right in driving direction; Holder for crank handle Tarp fastening on left in driving direction with 2 tension belts incl. rubber pads and tension locks under the platform Tarp color similar to RAL 9006 white aluminum Lighting/Electrics 24-volt lighting unit

Leto izdelave: 2016, Stanje: skoraj kot novo (rabljeno), CODIMAG VIVA 420 Aniflo – 8 Farben  Baujahr: 2016 – neuwertig  8 Druckwerke / Ausstattung: 1 Flexo - 6x Offset - 1 Flexo  2x Flexodruckwerke  6 Offsetdruckwerke mit Aniflo-Technologie  Bahnreinigung  Lackiereinheit  halbrotativer Stanzzylinder  100% Qualitätskontrolle Lodpfx Ajibdyfjh Dehn

Stanje: skoraj kot novo (rabljeno), konfiguracija osi: 2 osi, skupna masa: 18.000 kg, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prva registracija: 05/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, medosna razdalja: 1.310 mm, številka stroja/vozila: 122, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle welded steel frame construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Plug-in locking system for tipper body with cross-locking safety feature Drawbar Cranked drawbar with height-adjustable heavy-duty bolted towing eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support device Front: 1 mechanical landing leg with crank on the left in direction of travel, brand at manufacturer’s choice, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, axle load capacity 9 t/axle, off-road version, automatic brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, manufacturer at manufacturer’s choice (road tread) 4 steel rims 11.75 x 22.5, without offset, silver No spare tyre or spare rim(s) Braking system/Suspension Braking system according to EC directives 71/320 or ECE R13 Two-line compressed air brake system Brake system brand Knorr EBS system 2S2M, 2nd axle sensed RSS - stability program Spring-actuated parking brake on 2nd axle Aluminium air reservoir Brake/air connection lines with Duomatic quick-release couplings EBS/ABS connection cable Hose lines routed beneath the drawbar Electronic air suspension with automatic lowering function via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/Safety systems Axle load display via EBS CAN Bus signal for display in the driver’s cab Tipper body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on the front wall Lhsdpfx Ahek Ttc Ss Dsn Special fine-grain steel floor plate 5 mm (Slight floor ripple due to welding distortion possible) 5 pairs of high-swing lashing rings 5 t (distance between lashing rings approx. 2,320 mm) 1-piece reinforced aluminium hollow-profile side walls 60/40 mm, approx. 980 mm high, fold-down with extended swivel lock closures and spring-assisted lifting aid, and additional pendulum function Side walls left and right with manual central locking 2 rear corner posts at side wall height, rigidly mounted to the sides Steel rear wall 4 mm (HB400), approx. 980 mm high, pendulum type with recessed mounting, hooks for metering chains (on rear wall and underbody) Rear wall locking = automatic pneumatic lock 2 metering chains for the pendulum rear wall With sealing strips Hydraulics Single-line system with hydraulic hose and SVK DN13 quick connect coupling Tipper cylinder for three-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarp Plastic roll tarp including aluminium rod and hand crank, side overhang approx. 400 mm, without customs closure, on the right in the direction of travel horizontal tarp bar rope lacing, front and rear zigzag lacing; Stop bracket and securing for rolled-up tarp on the right in the direction of travel; Holder for hand crank Tarp fastening on the left in the direction of travel with 2 tension belts incl. rubber pads and tension locks on the body

Leto izdelave: 2019, Stanje: dober (rabljeno), Baujahr: 2019 Maschinentyp: Hybrider Digital-Inkjetdrucker Modell: Gallus Labelfire 340 Druckfarben: 8-Farben-Digital-Inkjet, 1200 dpi Bahnbreite: 340 mm Hauptmerkmale: • 📌 Hybridtechnologie: Kombiniert digitalen Inkjetdruck mit Flexodruckeinheiten • 🎨 Flexoeinheiten: 2 x Flexoeinheiten • 🖌️ Siebdruckeinheiten: Siebdruck für hohe Opazität • ✨ Kaltfolieneinheit: Für metallische Veredelungen • ✂️ Stanzung: Halbrotatives Stanzsystem für vielseitige Schneidoptionen • 🌐 Oberflächenbehandlung: Corona-Behandlung für verbesserte Tintenhaftung • 🔪 Schneidsystem: Integriertes Schneiden für fertige Etikettenrollen Ledpfx Ahjutaz Ss Dohn Materialangaben: • 📏 Verarbeitbare Materialien: Monofolien (30 - 200 µm), Papier (30 - 400 µm), Verbundmaterialien (30 - 400 µm) • 📦 Kernaufnahme-Durchmesser: 76 mm • ⚖️ Max. Rollengewicht: 250 kg Technischer und optischer Zustand: • Technischer Zustand: 9/10 (überprüft, in exzellentem Laufzustand) • Optischer Zustand: 9/10 (gereinigt, kann sofort an Endanwender geliefert werden)

Leto izdelave: 2005, Stanje: dober (rabljeno), GALLUS TCS 250 (4-Farben-Offset + 1 x Flexo-Lackierung)  Baujahr: 10/2005  Abwicklung  Aufwicklung  Offset-Druckwerke: 5 Druckwerke (aufgrund defekter Steuereinheit, Stromversorgung, Feuchtwerk-Motor nicht voll funktionsfähig)  Lackierwerk: 1 Flexodruckwerk für Lackauftrag  Stanze: 1 x Flachstanzung  Format: max. 270mm  Format: min. 166mm  Flachbett-Stanzeinheit Ledpjlua Hisfx Ah Dshn  Software- und Steuerungsversion: V01

Stanje: dober (rabljeno), Leto izdelave: 2004, Prozess: UV-Offset (6 Druckwerke) + Flexo (1 Druckwerk) — insgesamt 7 Druckeinheiten Upgrades (2021): Dr. Hönle UV-System (8 Lampen), Farbnebelauszug, Techno Trans Feuchtmittelaufbereitung, Video-Bahninspektionskamera Zustand: Insgesamt gut / funktionsfähig testbar Standort: Deutschland Bahn & Format Ljdpfx Ahjxf Dmpj Djhn • Max. Bahnbreite: 450 mm • Max. Druckbreite: 430 mm • Inklusive Wiederholungs-/Formatkassetten: 13", 18", 20", 24" • Gummitücher: 0,95 mm selbstklebend • Materialstärkenbereich: 40–300 µm • Mechanische Geschwindigkeit: bis zu 150 m/min Ab- und Aufwicklung & Bahnführung • Abwicklung: Standard, 76 mm (3") Luftwelle • Bahnlaufregelung / Kantensensor • Bahnreinigung (Endfertigung/Bahnreiniger) • Aufwicklung: mit 76 mm (3") Welle Druck- & Weiterverarbeitungsmodule • 6 × UV-Offsetdruckwerke mit Farbnebelauszug • 1 × Flexodruckwerk • Laminierstation • Kaltfolien-Station • Rotationsstanzung mit Gitterabzug und Gitteraufwicklung • Video-Inspektionskamera-System (2021) UV & Peripherie • UV-System: Dr. Hönle, 8 Lampen (Einbau 2021) • Feuchtmittelaufbereitung: Techno Trans (2021) • Farbnebelauszug: Nachrüstung 2021 Stellfläche (am aktuellen Standort) • Ca. Stellfläche: 18 m × 5 m Werkzeug & Zubehör • Plattenbieger und Plattenstanze • Für jedes Formatset: sechs (6) Offset-Kassetten • Flexoplattenzylinder: einer (1) • Magnetzylinder: einer (1) • Auswahl an Rotationsstanzblechen (Details auf Anfrage) Optional (gegen Aufpreis) • ABG Vectra Non-Stop-Turret-Aufwickler (Kleinrollen) — auf Anfrage verfügbar. Hinweis: Anschlusswerte, Original-Bedienungsanleitungen sowie die genaue Liste der Rotationsstanzbleche auf Anfrage erhältlich.

Stanje: dober (rabljeno), Leto izdelave: 1990, SANJO P 25S - 6C Baujahr: 1990 Bahnbreite: 270 mm 6-Farben Flexodruck 1 x Lackierwerk Abwicklung Aufwicklung Viele Druckzylinder und Rasterwalzen werden mit der Maschine geliefert DELAM/RELAM Standort: Druckerei/Deutschland Lsdpfx Aegvg A Seh Dehn