Pladenj Polica nakup rabljenega (488)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, A semi-automatic tray sealer from Italian Pack is available. Packaging output for VAC/GAS: 4-5 cycles/min, packaging output for SKIN: 3 cycles/min, vacuum pump capacity: 63 m³/h, maximum packaging depth: 120 mm, film diameter range: 250 mm-340 mm, maximum film width: 370 mm, machine dimensions (L/W/H): approx. 1100 mm/1100 mm/1400 mm. Includes automatic film rewinder. Documentation available. An inspection on site is possible. Gkedewt Dabopfx Ah Dec

Stanje: dober (rabljeno), Leto izdelave: 2019, Pallet racking, Nedcon, height 2.50 – 2.70 m, beam length 3 m and 4 m, 500 kg per pallet, up to 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for complete purchase including numerous short beams and short and long upright/end frame protections / guard rails (for double and single rows)! Price for partial quantities: Frames: €45 each Beams: 2 m: €14 each 3 m: €18 each 4 m: €22 each Manufacturer: Nedcon Type: Pallet racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500 kg Number of frames: approx. 900 units Most frames come with frame protectors Frame height: 2.50 m and 2.70 m Frame depth: approx. 1.10 m Beam lengths: 4 m at least 624 units (beam height e.g. 12.5 cm / bearing approx. 5 cm) 3 m at least 518 units (beam height e.g. 8.5 cm / bearing approx. 4 cm) Some 1 and 2 m beams also available Gkodpfx Ahjw D Ewvo Dsc Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Stanje: dober (rabljeno), Frame: 7000*1050 mm 105 EUR/piece (53 pieces) Beams: 1800*100*50 mm, 2400 kg/level, 10 EUR/piece (315 pieces) If you require racking systems or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and are happy to assist you with your planning. Additional accessories such as: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decking, rear mesh panels, depth bars available. Godpfeuf Snaex Ah Dokc Shipping: Please inquire about freight costs, stating your postcode, location, and required quantity of articles. Further services: Planning, racking assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications, prices, and prior sale!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, skupna višina: 2.000 mm, skupna širina: 1.100 mm, Suffel regalni sistem 50 okvirjev 2000mm x 1100mm x 85mm 150 prečk 3600mm x 100mm Police 38mm Gksdpow Np Rcjfx Ah Dec Nosilnost na polje 5320 kg pri dolžini upogiba 1400mm Slike prikazujejo obseg brez povezovalnih elementov. Okvirji in prečke so bili pokriti s ponjavo.

Stanje: novo, Cross Beams Hayrax – For Pallet Front and Shelving Boards | For 1100 mm Racking | Thousands in Stock! We offer robust cross beams for warehouse racking with a depth of 1100 mm – ideal both for pallet support and under-board applications. Our beams enhance stability and storage safety, enabling efficient organization of your warehouse space. Available colours: Yellow Orange Blue Technical Specifications: Load Capacity: 500 kg Application: for boards or as crossbars for pallets Compatibility: racks with 1100 mm depth Gksdpfxjw Dp Ape Ah Dsc Offer Highlights: Thousands of items available ex-stock Custom production of crossbars in different lengths and colours upon request Durable construction, powder-coated, with an aesthetic finish Perfect for improving racking rigidity and securing loads Looking for strong and visually appealing crossbars? Call us to place your order – bulk or individual orders welcome. Manufactured and available directly from Magazimm!

Stanje: rabljeno, Four in a Row – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER Polypal Pallet Rack Beam Traverse Clear Width: approx. 2,700 mm Profile Type: closed box profile Material: steel Color: orange Maximum load per pair of beams with evenly distributed load: 2,400 kg (800 kg per pallet) The price stated is a unit price and applies per beam. This is a used item. PROJECT PLANNING Our sales team will be pleased to prepare a non-binding quote tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. The price is a unit price/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and crafts. Gkedom Rg Aujpfx Ah Dec We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. Please feel free to contact us if you have any questions.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, An intelligent tray sealer system Italian Pack (VAC/GAS) is available. Packaging output: 5-8 cycles/min, tray dimensions X/Y/Z: 205mm/160mm/40mm, buffer tank volume: 14L, vacuum pump capacity: 100m³/h, machine dimensions X/Y/Z: approx. 2750mm/850mm/1550mm, weight: approx. 500kg. Includes sealing tool for the packaging dimensions listed above, tool change scales, automatic outfeed conveyor with tray separation, and automatic chain lubrication. Documentation available. On-site inspection possible. Gksdpjwt Dahsfx Ah Dec

Stanje: dober (rabljeno), 782 USED Miwe Ideal Deck Oven with a Baking Surface of 15 sqm. EXTERNAL OVEN DIMENSIONS (in cm): - width: 222 - length: 288 + 52 canopy - height: 270 BAKING CHAMBER DIMENSIONS (in cm): - width: 180 - length: 168 - height: 15 (2 lower retractable decks), 17 (3 upper decks) EQUIPMENT: Gkodpfx Ahstr Exme Dsc - used gas or oil burner (new burner available upon request) We offer devices in various technical conditions and at different prices: 1. As removed from the bakery (untested). 2. After inspection with start-up warranty. 3. After refurbishment with a 6-12 month warranty. The machine ready for inspection is located at our warehouse (36-068 Bachórz, Poland). Available paid options: refurbishment / transport / installation / commissioning. The price given is net (VAT excluded). WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: dober (rabljeno), 73 pcs 7000*1000 mm frames 512 pcs 3600*100 beams Storage capacity: 1280 pallet spaces Gkodsu Ibnwepfx Ah Doc Load capacity: 400 kg/pallet

Stanje: novo, Leto izdelave: 2025, Nudimo visokokakovostne police za sadje in zelenjavo za maloprodajne trgovine. Naše police so na voljo v številnih modelih, barvah in velikostih, tako da se popolnoma prilagodijo postavitvi vaše trgovine in potrebam vaših izdelkov. Ne glede na to, ali potrebujete kompaktne police za manjše prostore ali večje enote za obsežnejše razstave, imamo pravo rešitev za vas. Cene se razlikujejo glede na model in velikost, kar vam omogoča prilagodljivo izbiro najbolj ustrezne možnosti za vaše podjetje. Gedpfx Asw S Inxjh Dekc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking with Roof Supports: Hot-Dip Galvanized Bolt System Scope of supply: - 7 racking uprights, height 4,230 mm with base section, usable depth 1,200 mm - 21 cantilever arms, usable depth 1,200 mm, with deflectors - 7 roof supports with 1,500 mm projection, pre-drilled for onsite roof installation (*Wooden purlins and trapezoidal sheets for the roof construction not included) - Including longitudinal and diagonal bracing for 1,900 mm upright spacing - Incl. fasteners (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (max. snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,900 mm axis spacing - Rack length: 11,500 mm Gkedpemhhy Njfx Ah Dec - Included fasteners (without floor anchors) - With assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Onsite pickup possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with advance notification before delivery. The material is packed for safe and easy unloading. The subfloor must be concrete, level, and suitable for doweling, and must be capable of bearing the loads. The floor condition and load capacity, as well as any required official approvals, must be checked and ensured by the customer. The racking uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the uprights should project at least 500 mm above the highest storage level.

Stanje: rabljeno,

Stanje: skoraj kot novo (rabljeno), 7500 shelf inserts for Schäfer EF 6420 crate Used, in very good condition, see photos Length: 52.5 cm Width: 35.5 cm Height: 2.5 cm Negotiable price: €0.50 net per piece, ex stock, for orders of 100 units or more Larger quantities available on request! Gkjdpor Ey Dyjfx Ah Doc Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 running metres of pallet racking from various manufacturers in stock. (Specifications, information, and prices are subject to change and error, as well as prior sale! Please refer to our Terms and Conditions. All prices exclude VAT, ex stock.)

Stanje: dober (rabljeno), 781 USED Winkler Columbus Deck Oven with a baking surface of 10 sqm. EXTERNAL OVEN DIMENSIONS (in cm): - Width: 152 - Length: 281 + 14 (hood) - Height: 236 BAKING CHAMBER DIMENSIONS (in cm): - Width: 120 - Length: 160 - Height: 15 (4 lower decks), 17 (top deck) EQUIPMENT: - Used gas or oil burner (new burner also available) We offer equipment in various technical conditions and at different prices: 1. Directly from the bakery. Gedpfxstr E Auo Ah Dokc 2. After inspection, with start-up warranty. 3. Refurbished, with 6-12 month warranty. The machine is available for viewing at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: dober (rabljeno), Armes Palettenregalsystem zur Lagerung von Dokumenten. Rahmen: 9500 × 1720 mm Gedpfjwrzhmox Ah Djkc Traversen: 1540 × 70 mm 1910 × 70 mm 2270 × 70 mm Gitterrost: 730 × 1720 mm 930 × 1720 mm 1100 × 1720 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany Gedpjmhh Dtsfx Ah Dekc - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: dober (rabljeno), 25 running meters of tyre racks Used equipment, very good condition, see photos Height: 2.5 m Depth: 50 cm Bay load: 9000 kg Beam length: 2.1 m Beam load per level: 1000 kg Asking price: €1,950 net ex stock Offer includes: + 12 uprights pre-assembled, 9t bay load, depth 50 cm, height 2.5 m Gkedpjfdik Ijfx Ah Dec + 66 beams, length 2.1 m, 1000 kg load per level + 132 safety clips + 24 concrete anchors + Load plates Alternative configurations available on request! Goods in stock. Transport and installation available on request. Inspection possible by appointment at any time. Further information on request. Constant stock of over 5,000 running meters of pallet racking from numerous manufacturers available. (Changes and errors in technical data, information and prices as well as prior sale reserved! Please see our terms and conditions, all prices excluding VAT ex stock.) Purchase / Sale: We are constantly looking for and offering numerous items from a wide range of sectors Broom-clean clearance of business premises Business liquidations Fast - flexible - efficient! We also clear and/or dispose for insolvency administrators. Write to us with a few keywords and we will get back to you promptly. To access our page, please click on our logo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Gjdpofdkb Tefx Ah Dekc Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard Gkedpemhh Dhjfx Ah Dsc - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany Gkodpsguk Dkefx Ah Doc - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth Gsdomhh Anspfx Ah Djkc - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm Gsdpfxsguk Dve Ah Dskc - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Gjdpfx Asmhh Dzeh Dokc Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level. Godpfx Ajguk A Hsh Dokc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Gedpfsmhhypox Ah Djkc Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.