Panhans 250 nakup rabljenega (90)

Stanje: rabljeno, Leto izdelave: 1990, Machine cleaned, overhauled, lubricated, made operational, functionality tested – spindle run-out 0.1 mm. Overhauled and adjusted, test run performed. Various parts replaced: electronic power supply units for displays, Elgo digital display, fuses, signal lights. Used, in good condition. Manufacturer: Panhans Model: 240 Year of manufacture: 1990 Machine No.: 212 Motor upgraded to 11 kW Tilting range: -5° to +45° Speed ranges: 3000 / 4500 / 6000 / 9000 rpm Right and left rotation Table size: 1350 mm x 800 mm Lsdpjvwfx Ujfx Af Aerw Extension table: approx. 600 / 2400 mm Extendable frame support Spindle diameter: 30 mm Cast fence jaws Milling fence with fine adjustment Electric adjustment for height and tilting Digital displays for tilting spindle / spindle height Socket for feed unit Extraction port D 2 x 120 mm Required space: approx. 2500 mm x 1300 mm x 1300 mm Weight: approx. 1100 kg Location: 97447 Gerolzhofen, free loaded, unpacked Hand-over in as-inspected condition, as seen, without guarantee or warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, On offer: A precise panel saw from Panhans Manufacturer: Panhans Model: 690 Serial Number: 519 Year of manufacture: 1989 Weight: approx. 1,100 kg Operating hours: — Lredjwttq Aopfx Af Aew Space requirement: approx. 7,000 × 3,500 mm Motor power: 7.5 kW Voltage: 380 V / 50 Hz Power consumption: 12.9 A Sliding table length: 2,600 mm Table height: 900 mm (±20 mm) Saw blade diameter: max. 450 mm Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm Cutting height: max. 155 mm at 90°, 105 mm at 46° Saw blade tilt: 0°–46° Height and tilt adjustment: Mechanical Scoring unit: No Extraction capacity: approx. 1,450 m³/h at 20 m/s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, dolžina vretena za rezkanje: 150 mm, moč: 11 kW (14,96 KM), premer vretena: 40 mm, skupna masa: 1.500 kg, Double-sided swivel spindle mounting with 2 robust segment guides, column in modern steel construction, table in heavy-duty, high-ribbed cast design, interchangeable milling spindle, three-phase motor with 4 speeds, electric height and swivel adjustment in both rapid and fine feed modes with electronic digital display, incremental measurement switching during height adjustment, milling fence with fine adjustment and metal fence jaws as well as replaceable aluminum anti-splinter inserts, extraction ports at the milling fence and below the table, each 120 mm diameter, minimum extraction speed at the extraction port 20 m/s, rotatable table insert, interlocked rotary switch for forward and reverse operation, lockable main switch, cam switch, automatic motor brake. Lrjdpfxswcpqqe Af Ajw Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Milling spindle holder: MK 5 Speeds: 3000/4500/6000/9000 rpm Swivel range of the milling spindle: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, incl. extendable frame support Stepless 4-roller feed unit 2-axis control Milling spindle with 40 mm diameter and 150 mm length

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 500 mm Belt speed: 1300 m/min Cutting height: 330 mm Cutting width: 480 mm Blade length max.: 4140 mm Saw blade width min. / max.: 15 mm / 25 mm Option with special coating: Saw blade width min. / max.: 6 mm / 20 mm Table size: 670 x 495 mm Table height: 900 mm Extraction port: 2 x Ø 100 mm Motor power: 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German machine engineering Machine base in elegant, modern, torsion-resistant double-chamber steel welded construction Upper and lower doors secured by safety switches Upper and lower precision band saw blade guides APA 2, size 1 Finely planed cast iron table Table tiltable up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Ljdpfx Afjv Huggs Aerw Rip fence can be used to the left of the saw blade, fence profile reversible Blade tension indicator 1 pc. saw blade 4140 x 20 x 0.45 mm, tooth pitch 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard via handwheel with lock ratchet Push-button switch for start/stop with emergency stop button and motor protection relay Maintenance-free electric motor brake CE compliant GS approved Machine base left-hand version Drive motor: 1.5 kW / 2.0 HP Availability: short-term Location: Flörsheim

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Connection rating 380V 11kW 30A Electric tilting -5° to +45° Electric height adjustment Digital display Lrodsub S U Sopfx Af Asw Forward/reverse rotation Speeds 3000/4500/6000/9000 rpm Fence with Siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Overhead control panel Extraction connection 2x120 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 163, širina skobljanja: 420 mm, skupna dolžina: 2.500 mm, skupna višina: 1.200 mm, skupna širina: 1.400 mm, dolžina mize: 2.500 mm, dolžina obravnalne ograje: 180 mm, višina ograje za poravnavanje: 1.110 mm, odstranjevanje ostružkov pri površinskem obdelovanju (max.): 12 mm, število rezil rezkalnika: 2, število rezil: 4, vrsta vhodnega toka: trifazni, Stroj je bil leta 2007 pred prevzemom eksterno pregledan in niso bile ugotovljene nobene napake. Od takrat je bil stroj uporabljen v delavnici za izdelavo lokov (lokostrelstvo) z zelo malo uporabe v primerjavi z industrijsko rabo. Nadomestni noži so vključeni. Prikaz odstranjevanja ostružkov ne deluje. Drugače ni znanih nobenih drugih napak. Na lokaciji je na voljo viličar za pomoč pri nakladanju. Razstavljanje, nakladanje in transport mora organizirati in plačati kupec. Stroj je v obratovanju do 18.07. in je do takrat v Plankstadtu pri Heidelbergu. Nato bo v 31863 Bisperode (Hameln-Pyrmont). Ob sklenitvi nakupa pred 17.07. je možno stroj po potrebi prevzeti v Plankstadtu do 15.08. Lrsdpfx Afjwyk Rgo Asw

Stanje: rabljeno, Leto izdelave: 1989, with positioning control and Tersa cutterblock cleaned, function tested, trial run performed - Machine lubricated - Trial run - Feed rollers replaced - Outfeed rollers replaced - Rubber lips at front and rear replaced - Test planing Spare parts: Panhans feed rollers, overhauled control unit used, good condition Manufacturer: Panhans Type: 435 Year of manufacture: 1989 Machine no.: 170 GS tested Motor: 5.5 kW / 0.25 kW Planing width approx. 510 mm Planing height approx. 250 mm Segmented pressure beam Ledpovwfbijfx Af Ajrw Rubber feed roller Rubber outfeed roller Feed rate: 7/14 m/min Number of knives: 4 Knife system: Tersa reversible knives Electric height adjustment Automatic positioning control Sound insulation Extraction port: 160 mm diameter Space requirement: approx. 1100 mm x 1200 mm x 1200 mm Weight: approx. 950 kg Total connected load: approx. 5.75 kW Location: 97447 Gerolzhofen, available free on truck, unpacked Delivery in the as-inspected condition, without guarantee and warranty

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, obratovalne ure: 5.400 h, Funkcionalnost: popolnoma funkcionalen, On offer: A moulding machine with tiltable spindle Manufacturer: Panhans Model: 240 Serial Number: 150 Year of manufacture: 1989 Weight: approx. 900 kg Operating hours: 5.400 Dimensions: Total length: 2,550 mm Total width: 1,350 mm Total height: 1,700 mm Motor: 7.5 kW Lodpfx Afjwttqij Aerw Working height: 875 mm Cutterhead diameter: 30 mm (standard) Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Spindle tilt, electric: –5° to +45° Spindle height via electric adjustment Feed: 3-roller feed unit (manufacturer: Holzher)

Stanje: dober (rabljeno), Leto izdelave: 2007, Planer/thicknesser machine Model: Panhans PA 51 Year of manufacture: 2007 Planing width: 510 mm Lredpfx Afswkf Hke Ajw Cutter block with 4 strip knives Infeed table length: 1180 mm Outfeed table length: 1180 mm Motor: 4.0 kW / 400 V

Leto izdelave: 1978, Stanje: rabljeno, številka stroja/vozila: 1010, Roller diameter 1,000 mm Bandsaw blade length 7,100 mm Max. cutting width: 960 mm Max. cutting height: 620 mm Motor: 5.5 kW Table size: 1,450 x 1,030 mm Installation dimensions (L x W x H): 1,900 x 1,160 x 3,130 mm Lrsdpfxshzgnze Af Asw Sale in "as is" condition, ex location Seevetal, without freight and packaging, subject to prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 402, dolžina rezanja (maks.): 3.200 mm, višina reza z zareznim rezilom (max.): 70 mm, premer žaginega lista: 300 mm, največja višina reza: 70 mm, največja širina rezanja: 3.200 mm, Oprema: dozator, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: Saw blade Ø 300 mm, Ø 30 mm bore, Z=60 teeth, SH 70 Scoring unit: Yes - Saw blade Ø 125 mm, Ø 20 mm bore, Z=24 teeth Softforming unit: No Side pressure device: Yes - Model: FR 50/100 Offcut cutting device: Yes – Pressure beam recess Veneer cutting device: Yes Edging cutting device: Yes – Distances: 145/525/1790 mm Front support table: 400 x 1400 mm – 2 pieces Rear support table: 240 x 2960 mm – 1 piece Rear support rails: 40 x 2960 mm – 5 pieces Ledpfx Afjvi H Die Aorw Angle table: 480 x 1400 mm on the left Angle fence: extendable Clamping grippers: 4 pieces – floating – distances 70/400/1600/2800 mm Stop jaw: 2 pieces – fixed – distances 1000/2200 mm Additional rear support foot: No – 3 feet Safety guard: Yes Foot switch: No Cutting direction: left to right Unit can emerge in any position: No automatic lowering with saw overrun: No 3-level cutting height adjustment: No Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensator: fine adjustment motor: 0.12 kW, 380 V, 1380 rpm, main motor: 0.35 kW, 380 V, 1350 rpm.

Stanje: zelo dobro (rabljeno), Motor 5.5 kW Table length 2 m Table width 52 cm 4 knives Working height 19 cm Ledewm Dz Sjpfx Af Aerw Top and bottom sides electrically adjustable

Stanje: rabljeno, Leto izdelave: 1975, Formatna žaga Panhans IDL000791 Lrodpfx Afsukgyis Aew - proizvajalec: Panhans - model: 685 - leto: 1975 - delujoče stanje

Stanje: zelo dobro (rabljeno), Drilling depth: 14 cm Lrodpoupz Tzsfx Af Asw Drilling height: 14 cm Drilling width: 23 cm 2 kW motor Very good condition.

Stanje: zelo dobro (rabljeno), Length 260 cm 0.75 kW motor Lrjdpfshpuiuex Af Aew In very good condition.