Oves nakup rabljenega (1.148)

Stanje: rabljeno, V-belt pulley, Pulley Hnedpfxem At Hlo Af Tjg - V-belt pulley: 4-groove pulley - V-belt width: 17 mm - Bore: Ø65 mm - Dimensions: Ø290 x 82 mm - Weight: 15 kg

Stanje: rabljeno, V-belt pulley, belt pulley - V-belt pulley: 4-groove pulley - V-belt width: 17 mm Hjdpfx Asm At H Tsf Tjng - Bore: Ø65 x 65 mm - Dimensions: Ø257 x 80 mm - Weight: 10.5 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush mounting, taper tension bush, taperlock tension bush - Diameter: 510 mm - Overall width: 185 mm - Grooves: 7 - V-belt width: 22 mm - Taper bush fitting: Desch 5050-80 Ø 80 mm (interchangeable) Hnedpfx Aoflhdfsf Tog - Pulley: dynamically balanced - Quantity: 1 unit available - Weight: 120 kg - Other pulleys: in stock

Stanje: rabljeno, V-belt pulley, pulley with taper bush mounting, taper bush, taperlock bush - Diameter: 570 mm - Overall width: 314 mm Hnsdpfxjct H T Eo Af Teg - Number of grooves: 12 - V-belt width: 22 mm - Taper bush bore: Ø 95 mm (interchangeable) - Pulley: dynamically balanced - Quantity: 1x pulley available - Price: per piece - Weight: 169 kg - Other pulleys in stock

Stanje: rabljeno, V-belt pulley, pulley with taper bush, taper tension bush, taper lock bush - V-belt pulley: 3-groove pulley 250/4 - V-belt width: 17 mm - Taper bush mounting: Ø 100/107 x 52 mm (interchangeable) Hjdpfx Aom At Hasf Teng - Dimension: Ø 257 x 65 mm - Weight: 11 kg

Stanje: rabljeno, V-belt pulley, pulley with taper bush, taper lock bush, taperlock bush - V-belt pulley: Pulley 8-groove SPC 300 8 - V-belt width: 22 mm - Bore: Ø132/145 mm for taper lock bush TB 4040 (interchangeable) - Dimensions: Ø300 x 215 mm Hsdom At Hdjpfx Af Teng - Weight: 44 kg

Stanje: rabljeno, V-belt pulley, belt pulley Hnjdpfx Ajm At Ibof Tjg - V-belt pulley: 9-groove belt pulley - V-belt width: 22 mm - Bore diameter: Ø130 mm - Dimensions: Ø365 x 240 mm - Weight: 52 kg

Stanje: rabljeno, V-belt pulley, belt pulley - V-belt pulley: 7-groove pulley - Belt width: 17 mm - Bore: Ø69 mm - Dimension: Ø330 x 140 mm Hjdom At Ifopfx Af Tsng - Weight: 29 kg

Stanje: rabljeno, V-belt pulley, belt pulley - V-belt pulley: 14-groove belt pulley - V-belt width: 22 mm - Bore: Ø110 x 250 mm - Dimensions: Ø325 x 365 mm - Weight: 88 kg Hnodem At Imopfx Af Tsg

Stanje: rabljeno, V-belt pulley, belt pulley - V-belt pulley: 12-groove belt pulley - V-belt width: 17 mm - Bore: Ø85 x 175 mm Hnsdpfx Afsm T Ah Ee Tsg - Dimensions: Ø260 x 235 mm - Weight: 40 kg

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to upper edge of table top 850 mm Installation height: 600 mm Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s Output: 65 L/min (REXROTH axial piston pump) Motor: 15 kW – 1500 RPM Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1500 kN (150 tons – at 245 BAR) Operating Mode Selection: Via key switch - Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear) - Automatic via two-hand operation at full speed (with active light curtain safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 RPM (IE-3) Pump: 45 cc – 65 L/min – REXROTH axial piston pump Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s Clear width: 1300 mm Worktable: 1200 x 800 x 90 mm – with T-slots Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to upper edge of table top) Hydraulics: (Hydraulic accessories mounted on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety Mechanical ram safety for upper dead center position Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control System: Main control cabinet (mounted laterally to press frame) Swiveling control panel SIEMENS S7-1200 KTP 9” SIEMENS touchscreen (language selection DE/ENG) Safety PLC (SICK) Light curtain for front & rear of working area (SICK 750 + 150 mm) Soft starter Movable two-hand control SECOMEA Ethernet connection Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit) Work area lighting (2x, IP66) - 8 free I/O ports at PLC for external connections ----- - Safety rail around hydraulic unit - Side access ladder ----- Documentation: Operator manual GERMAN (1x paper, 1x USB), Hedpfx Asmpfwdof Tong Hydraulic & control diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg Paintwork: frame RAL 7035 light grey

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 6254 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €15,040 Lease rate: €288.77 In stock: 1 Saw frame: double column guide Saw blade dimensions: 3270 x 27 x 0.9 mm Band speed: 40/80 m/min Cutting capacity 0° round: 300 mm Cutting capacity 0° square: 300 mm Cutting capacity 0° flat: 350 x 260 mm Cutting capacity 45° round: 210 mm, square: 210 mm Cutting capacity 60° round: 110 mm, square: 110 mm Working height: 830 mm Motor: 1.5 kW Length: 1,500 mm Width: 1,600 mm Height: 1,900 mm Weight: 590 kg Hydraulic vise INCLUDING ADJUSTABLE CLAMPING PRESSURE Lowering and raising of the saw frame via hydraulic cylinder Quick lowering Hjdpfx Afowiqnds Tong Automatic rapid lowering and lifting, controlled by feeler pin Adjustable cutting pressure according to cross-section and material quality Double safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid raising of the saw frame; stop lifting of the saw frame; vise opens Manufacturer’s warranty until 31/12/2026 OPTIONS: Roller conveyors and saw bands on request

Stanje: novo, Leto izdelave: 2026, Palisades, posts, or round timber – always a perfect fit. The VKM dowel milling machine, designed in line with proven design concepts. Innovation doesn’t stop with round rod milling machines. Our machines for cylindrical milling of logs feature a range of new developments. Thanks to their modular construction, businesses can precisely select the machine size and configuration tailored to their specific woodworking requirements. Accurate round timber processing for every log. Technology: All roller pairs are actuated for opening and closing via a valve manifold – eliminating the need for mechanical diameter adjustment. This removes the unnecessary fine-tuning during setup changes. Even if a raw timber log is slightly larger than usual – that’s no longer an issue. With the use of a soft starter, the milling motors are gently ramped up before reaching full power. Alternatively – and especially for challenging power networks – a frequency inverter can also be offered for ramping up operations. Covering a machining range from 30 to 400mm across the entire product line, these milling machines accommodate even the most specific requirements. Efficiency: You control speed and productivity: firstly through your choice between a single-head or double-head milling machine model. For the perfect surface finish, VKM uses milling heads with higher rotational speeds. All components have been modeled with finite element calculations, reducing the number of parts – and thereby potential failure points. The high rotational speeds of the milling heads not only ensure excellent surface quality, but also guarantee high cutting speeds. Depending on the machine type, feed rates of up to 35 m/min are possible. The benefits? Higher speed, greater precision, more power. Safety: Hnodpjfw Ay Nsfx Af Tsg Simple machine operation via the central control panel. Pressure regulators for each roller section are mounted directly adjacent to it. Feed speed can also be reduced at any time as needed. All access doors are equipped with electric interlocks and can only be opened once the machine has safely come to a stop. This ensures maximum safety while maintaining top performance during operation.

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 527 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 05-9473, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 60 mm, skupna višina: 2.000 mm, skupna dolžina: 1.600 mm, skupna širina: 3.800 mm, največja hitrost vrtenja: 12.000 obr/min, vhodna napetost: 400 V, The machine in question is a grinding and drilling center (manufacturer's term: stone cutting machine). The machine is constructed as a vertical machining center in gantry design. The frame consists of a welded steel tube structure. The machine’s drilling head is mounted vertically. Angle adjustment of the drilling head is not possible in any axis. Tools with horizontal axes can be mounted using the available angle grinder attachment. The tool can be moved linearly in 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and not movable. The machine is used for: - Creating cutouts, producing rounded edge profiles, - Creating drip trays or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs. The machine is additionally equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for the clamping devices and for cleaning out the drill spindle) - a water connection (for cooling tool and workpiece during machining) Machine specifications: Manufacturer: Martin Kolb Maschinenbau - Type: Genius 2500 - Serial number: 05-9473 - Year of manufacture: 2005 - Max. machining area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Drive power (main drive): 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread Hodpfew Upzfox Af Tjng - Max. drilling diameter: up to 100 mm Various accessories such as cutters and additional tool holders are also included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 12.000 mm, vrsta vhodnega toka: trifazni, skupna širina: 1.000 mm, skupna višina: 2.800 mm, trajanje garancije: 6 meseci, kapaciteta rezervoarja: 300 l, Konig artisan industrie SFI 350. Popolna za proizvodnjo čebate, rogljičkov, pice na loparju/plošči. Popolnoma delujoča. Ura proizvodnje 1200 kg testa. Nima dela za zvijanje. Hjdpfx Asx Tcvbjf Teng Vključuje rezila z 1 do 6 vrsticami, rezila za okroglo pico, rezilo, ki simulira človeške prste. Stroj je čist in dobro vzdrževan. Stroj ima zelo malo delovnih ur.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Double-table machining center Hnodpfx Aeuqw E Njf Tog X working area: 2,590 mm Y working area: 2,260 mm Z working area: 400 mm Number of milling spindles: 2 Spindle with liquid cooling Main motor: 19.2 kW Maximum spindle speed: 24,000 rpm Aggregate heads 4th axis: C-axis Tool clamping system: HSK-F63 Central tool magazine positions: 24 Tool changer on each head with 12 positions Vertical drilling heads: 20 (per head) Horizontal drilling bits in X: 8 Horizontal drilling bits in Y: 8 Grooving saw in X, in Y 2 work tables Number of vacuum pumps: 4 x 360 m³/h T-Jet chip blowing system Nesting capability Manual labeling Barcode reader Tool length measurement Software: BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight: 17,900 kg

Stanje: rabljeno, Leto izdelave: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING UNIT "PRISMA": QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING "MATIC" WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (infeed side): 3,680 mm Working area Y-axis (max. workpiece size on rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length in pendulum operation: 1,650 mm Travelling speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62 - 82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction outlet diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling centre in gantry design with workpiece supports, capable of: - Vertical drilling on panel surface - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General 3-4-5 axis milling operations MACHINE STRUCTURE The base is a monolithic construction of thick-walled steel, additionally reinforced across the entire bed with welded stiffeners, ensuring extreme stability. The table shape, with a large base, is key to guaranteeing long-term precision and stability. The machine’s layout allows the user optimal workflow with minimal footprint. The mobile gantry is constructed as a solid monoblock and moves in the X-axis on prism-ground guides with ball-bearing carriages. The machining unit is also mounted on prism-ground guides and ball-bearing carriages on this mobile unit. AXIS MOVEMENT All axes travel on large-section prism linear guides with ball-bearing shoes for maximum contact area, ensuring optimal running even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved with helical rack and pinion drive. Large-section ball screws ensure precise positioning of the machining unit along the moving gantry (Y and Z axes). DRIVES, MOTORS, AND INVERTERS Perfect mechanical dynamics and highest positioning accuracy are ensured by high-quality drives and brushless motors capable of speeds up to 90 m/min, while maintaining optimum finish quality. CONTROL The control system consists of a numerical control unit for milling and drilling operations with the "Xilog Maestro" graphic user interface based on Windows 7 Office OS, 17" LCD color display, QWERTY keyboard, swiveling operator panel, and machine operator interface with Xilog Maestro software. Hnsdpfoxnldbjx Af Tsg Xilog Maestro Features Programming: - Parametric graphical programming - Import of DXF files (2D; geometries: "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aides for drilling and milling operations - Automatic optimization of drilling operations and tool-change cycles - Option to shift panel zero-point for drilling on inclined or curved panel edges

Stanje: novo, Leto izdelave: 2025, nosilnost: 1.000 kg, 3-axis turn and tilt positioner, 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 – 1500 mm For welding, assembly, machining, etc. With its stable and robust construction, flexible three-axis positioning including overhead capability, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal workpiece positioning improves weld quality and supports the specified load in any position. The two endlessly rotatable axes and additional height adjustment enable all workpiece positions, including overhead. Turntable speed steplessly adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range: 360° continuous Hsdpfx Afjx Th Rwj Teng Tilt range: 360° continuous Stroke: 1000 – 1500 mm Arm outreach radius: 1 meter

Stanje: rabljeno, Leto izdelave: 2024, nosilnost: 16.000 kg, dvižna višina: 5.520 mm, skupna dolžina: 8.020 mm, · Track width (center-to-center), front – rear (mm): 1855 – 1960 · Turning radius, outer – inner (mm): 5175 – 600 · Height with cab tilted, max. EGO cab, OHG (mm): 3395 Hnjdpfx Asx Tvfvjf Tjg · Width with cab tilted, max. EGO cab, OHG (mm): 3380 · Minimum working aisle width for 90° stacking (mm): 8770 · Mast tilt, forward – backward (°): 5 – 10 · Side shift ± at fork blade width (mm): 415 – 1530 · Axle load front, unladen (kg): 10,500 · Axle load front, with rated load (kg): 35,800 · Axle load rear, unladen (kg): 11,900 · Axle load rear, with rated load (kg): 2,600 · Air pressure (Mpa) hydraulic servo – steering wheel · Type – braked wheels: Oil-cooled wet disc brakes – drive wheels · Type – braked wheels: Dry, suspended disc brake – drive wheel · Hydraulic pressure max. (Mpa): 18 · Hydraulic oil capacity (l): 220 · Fuel tank capacity (l): 170 · AdBlue capacity* (l): 15 · Engine Power ISO 3046 – at speed (kW – rpm): 164/233 – 2200 · Torque ISO 3046 – at speed (Nm – rpm): 945 – 1500 · Number of cylinders – displacement (cm³): 6 – 6702 · Fuel consumption, normal driving (l/h): 8–10 · Clutch, type: Torque converter · Transmission, type: Hydrodynamic powershift · Number of gears, forward – reverse: 3 – 3 · Alternator type – output (W): AC-1960 · Starter battery: voltage – capacity (V – Ah): 2×12 – 150 · Ergonomic steering wheel: Adjustable and can also be tilted to one side. This reduces operator fatigue during driving and reversing. · Comfortable pedals: A new, flexible, and safe pedal system with an adjustable pedal angle. Improves ergonomics and minimizes driver foot fatigue. · High-performance wipers: Provide 90% coverage of the curved windshield. Roof wipers also integrated. · Ergonomic multifunction seat: Swivel and fully integrated. · Climate package: Complete and flexible air conditioning system that meets the high standards of the climate-tested EGO cab. Larger air inlets. Easy filter replacement at the machine front. Total driving comfort thanks to excellently dimensioned and engineered components. · Control console: Trouble-free adjustment, configuration, use, and understanding. All required controls, switches, levers, and indicators are easily accessible for efficient operation. · Operator panel: The perfect unit for drivers using the mini steering wheel or steering lever. Integrated control buttons. For optimal ergonomics, infinitely adjustable and individually tested. The ergonomic steering wheel folds forward without obstructing the view. · Optimized visibility: Completely new open design. With intelligent profiles and curved front and rear windows. Optimized visibility from all angles – with exceptionally good diagonal front and rear view. Strong open-air feeling. · Cummins' new diesel engines for EU Stage IIIB / EPA Tier 4i: The new Cummins diesel platform combines cooled exhaust gas recirculation with an improved high-pressure common rail fuel system (HPDR) and a particulate filter. This enables cleaner and more efficient combustion, resulting in up to five percent lower fuel consumption without compromising performance.

Stanje: novo, SCM gabbiani p90 Panel Sizing Saw - Demonstration Model - Special Offer! Technical Specifications: Saw blade projection: 90 mm Working table height: 950 mm Number of standard clamps: 5 CUTTING DIMENSIONS: 3300 x 3200 mm Variable saw carriage speed: 6 - 60 m/min Variable pusher speed: 0 - 60 m/min Saw blade motor power: 7.0 kW Speed: 4650 rpm Saw blade diameter: 340 mm Saw shaft diameter (main blade): 80 mm Scoring unit motor power: 1.5 kW Speed: 5850 rpm Scoring blade diameter: 200 mm Scoring blade shaft diameter: 80 mm Compressed air requirement: 300 NL/min Operating pressure: 7.0 bar Extraction air requirement: 2440 m³/h Extraction air velocity: 20 m/sec Extraction port diameter: 4 x 120 mm Including the following options: 590134 Cutting depth 3200 mm (Version 33) OF0263 eye-M operator console with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation (without gateway) for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with rollers, located on the longitudinal fence side 590246 Fixed air cushion table 2500x800 mm with rollers and reinforced fan 590239 2 x Movable air cushion tables 1500x600 mm with rollers and reinforced fan 590244 Saw carriage with independent lift control for saw and scoring blades 590245 Optimized vertical lift for the saw blade in 2 stages (medium/maximum) Hodpfxsiz A Amj Af Tjng 590143 Grooving unit with manual blade height adjustment 590241 Grooving function (forward/backward movement of the saw carriage) 590164 Double automatic side aligner 301230 Foot switch for cycle start and stop 590044 Compact labeling unit - Label printing with barcode 590144 4 x Additional clamps 900088 Magnetic tape monitoring for pusher position 102015 European safety regulations (CE marking) 109993 MACHINE LANGUAGE: German

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Hjdpfxjx Hdq To Af Tjng Coolant System Coolant pump power: 60 W Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.250 mm, trajanje garancije: 12 meseci, število podajalnih valjev: 1, Demonstration machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized infeed Longitudinal slitting with 5 pairs of blades with automatic feed Hnjdpfowy Hwpox Af Tjg Cross-cutting with rotary shear SPS1 control for automatic feed, longitudinal and cross-cutting The Forstner SLIT longitudinal and cross-cutting line is optimally designed for all sheet metal workshops, drawing on years of experience. It consists of a proven combination of traditional Forstner machines and can be combined with any manual or motor-driven decoiling device. Main advantages: - The new design further improves your SLIT system. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Extremely easy blade setting. Standard equipment: - Roller feed hopper - Feed table - 5 pairs of longitudinal slitters - Rotary shear for cross-cutting - SPS1 touch control - Speed: 25 m/min - Cutting capacity for steel during longitudinal slitting: - 1.5 mm with 3 pairs of blades - 1.25 mm with 4 pairs of blades - 1.0 mm with 5 pairs of blades

Stanje: rabljeno, Leto izdelave: 2023, Exhibition machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet every woodworking requirement. Highly efficient – with drilling spindles up to 8,000 rpm and industry-leading technology, offering the most robust spindle on the market with over 1,000 maintenance-free operations. Fully equipped – the suction cups can be individually configured using the TV FLEX worktable to tailor the machine to any specific need. Easy and intuitive programming is ensured by the integrated Cad-Cam MAESTRO CNC software. User-friendly operation – the lowered machine frame allows for unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and in the PRO SPACE version, no additional safety measures are required. Support structure The supporting structure consists of an exceptionally sturdy monolithic steel base, heavily ribbed for maximum robustness. The extra-wide support was specially designed to ensure stability and consistent precision under all operating conditions. Floor anchoring is not necessary. The base provides a large and solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support to withstand the most demanding workloads, ensuring superior quality and increased accuracy. The moving portal is fabricated from a solid single piece that is anchored to the base and travels on prismatic guides with recirculating ball carriages of the highest quality. The working unit is attached and moves on Y and Z axes, also on prismatic guides with recirculating ball carriages. Motion for the lower moving unit (X axis) and the working unit along the gantry traverse (Y axis) is accomplished via rack and pinion drives with helical gears, providing higher tooth engagement for greater acceleration and increased speed along X and Y axes. The specially designed helical gearing greatly reduces wear on mechanical parts and ensures quieter operation. The vertical Z axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic load and withstanding high acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, delivering extremely high finishing quality due to the elimination of vibrations. Movement along the X-Y-Z axes is performed by brushless motors powered by static inverters, offering: - Reduced processing times thanks to improved acceleration - Better positioning accuracy due to high-resolution encoders - No setup required upon machine start-up thanks to absolute encoders - Elimination of regular maintenance since the brushless system contains no brushes. Axis movement and all working elements are managed by... Hedpfx Ajx Twcief Tjng

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Hedper A Eq Rofx Af Tsng The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: rabljeno, Leto izdelave: 2006, · Working area: 2,650 x 1,240 mm · Travel range X-Y: 2,995 x 1,385 mm · Z-axis travel: 200 mm · Clearance height: 180 mm The machine base structure is a monolithic design made of thick-walled steel. It is reinforced with welded triangular plates across the entire machine bed, providing exceptional stability. The use of the triangular shape with a broad base for load-bearing components is the key to long-lasting precision and stability. The layout of the machine allows the user to achieve optimal workflow while requiring minimal floor space. This design gives the processing unit a balanced and secure foundation with excellent load distribution. The moving aggregate carrier is constructed from a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball carriages. The processing unit itself is mounted on this mobile carrier, also on prismatic, ground guides and recirculating ball carriages. Description of units and accessories (basic version) Drilling unit: Drill head with 12 + 6 spindles · 7 individually activatable vertical spindles in X · 5 individually activatable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm locating shoulder Grooving saw unit in X: · Integrated in the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed 1,500 – 24,000 rpm, steplessly via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Scope of delivery: 4 pcs. tool holders (right) without collet Tool changer R8L Automatic tool change system for 8 tools. Mounted on the rear aggregate carrier for rapid tool access. · Number of tool places: 8 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total tool weight: 22 kg · Holder for 1 angle gear · Moves in X-direction Horizontal milling unit (position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed 9,000 – 18,000 rpm steplessly via inverter · 1 output for collets 3–20 mm (ER32) · 1 output for saw/collet 3–12 mm (ER20) (For saw D=120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. milling diameter front: 20 mm · Max. milling length front: 110 mm · Max. milling diameter rear: 12 mm · Max. milling length rear: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table The work table is designed to guarantee the operator maximum range of motion. The vacuum quick-clamping system provides maximum flexibility with precise positioning and optimal workpiece holding. · 6 rails, 1000 mm, continuously adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, continuously adjustable in Y (2 pieces per rail) · 2 stops in X (1 left / 1 right) · 1 stop in Y per rail (total 6 pcs) · The retractable reference stops are CNC-controlled · Pendulum machining standard (2 working zones) --- Other clamping systems available as options --- Hsdpfsx Twccjx Af Tong Axis movement The drive system in X, Y, and Z axes operates via ground recirculating ball screws of the highest precision class. The ball recirculation...