Okuma Mc 60 Vae nakup rabljenega (224)

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Zagon v obratovanje 2001. Ijdpey Tuu Aefx Abxoic Tehnične podrobnosti Premer struženja: 420 mm Dolžina struženja: 650 mm Krmiljenje: Okuma OSP-U100L Premer vretena: 95 mm Hitrost vretena: 2800 obr/min Pomik osi X: 300 mm Pomik osi Z: 675 mm Glavni pogonski motor: 22/30 kW Teža stroja približno: 5,5 t Prostorska zahteva približno: 2700 x 1900 x 1885 mm - 12-pozicijski revolverski nosilec (VDI 40) z gnanimi orodnimi postajami, 3000 obr/min, 5,5 kW - Odsesovanje notranjega prostora Hengst Filtration (leto izdelave 2023) - Touchsetter, merjenje orodja - C-os (glavno vreteno) - Nadzor zlomov in obrabe orodja - 3-čeljustna vpenjalna glava, Kitagawa B210, Ø250 - Konjiček - Dovod hladilne tekočine, možno tudi skozi orodje - Pogovorno programiranje IGF - Transporter za odrezke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 380 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP‑P200LA‑R, število osi: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-position turret with live tooling, enabling milling and drilling operations on the C-axis. If you are looking for high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we are offering for sale. Contact us for further details. Isdpfxsy Rrwvj Abxoic • Turning configuration: 2 axes (X, Z) + C-axis; no Y-axis • Tailstock: Equipped • Tool presetting device: Automatic tool presetting device installed • Turret: 12-position turret with live tooling (milling and drilling on the C-axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2-6 • Spindle bore diameter: approx. 50 mm • Electrical connection: 380 V, 3 phase, 50/60 Hz • Apparent power rating: 17.7 kVA • Full load current: 26.7 A • Maximum motor current: 45 A Technical Specification Counter Spindle No Driven Tools No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 280 mm, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 155 mm, pomik po osi Z: 320 mm, model krmilnika: OSP 700L, TEHNIČNI PODATKI Največja stružna dolžina: 280 mm Iedpfx Aoy S S Hgobxjic Pomik X-os: 155 mm Pomik Z-os: 320 mm Hitrost vretena: 4.200 obr/min PODROBNOSTI O STROJU Krmiljenje: OSP 700L Revolver: V12 neposredni vpenjalni sistem OPREMA Transporter za ostružke Touchsetter Črpalka za hladilno tekočino Lovilec za obdelovance Vpenjalna glava s kleščami

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 3.200 obr/min, skupna masa: 6.500 kg, model krmilnika: U-10L, TEHNIČNI PODATKI Največji premer struženja: 210 mm Največja dolžina struženja: 500 mm Pomik X-osi: 155 mm Pomik Z-osi: 520 mm Hitrost vretena: 3.200 min⁻¹ PODROBNOSTI O STROJU Krmilnik: U-10L Dimenzije in teža Dimenzije (D x Š x V): 2.700 x 1.900 x 1.700 mm Skupna teža: 6.500 kg OPREMA Dokumentacija/priročnik Iodpfx Abjy S Sytsxsic Hitrost brezstopenjsko nastavljiva Lovilec delov Touchsetter V12 revolver VDI 30 (vsi gnani) Ročno pomičen konjiček Transporter ostružkov Črpalka za hladilno tekočino Podajalnik palic Samsys MUS-3000 letnik 2007 Vpenjalna glava SMW KNCS-N210-52

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 12.500 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: OSP 7000M, Oprema: transportni trak za ostružke, TEHNIČNE PODROBNOSTI Izmenjevalec orodij: 24 BT40 Iedjy S Sw Eepfx Abxoic PODROBNOSTI STROJA Krmilje: OSP 7000M HS: Velika izvrtina GS: Standardna izvrtina Črpalka za hladilno sredstvo: 8 bar Delovne ure vretena: 12.500 h OPREMA Transporter za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 10.500 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 630 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 935 mm, model krmilnika: Okuma OSP P200L, TECHNICAL DETAILS Swing diameter over cross slide: 630 mm Machining diameter: 630 mm Iiedpfx Aboy S Swxsxsc Distance between centres: 900 mm Travel X-axis: 580 mm Travel Y-axis: 160 mm Travel Z-axis: 935 mm Travel W-axis: 1,000 mm Travel C-axis: 360° Travel B-axis: -30° to 195° Main spindle: 3,800 rpm Counter spindle: 5,000 rpm Milling spindle: 6,000 rpm Rapid traverse X-axis: 40,000 mm/min Rapid traverse Z-axis: 40,000 mm/min Rapid traverse Y-axis: 26,000 mm/min Rapid traverse W-axis: 20,000 mm/min Rapid traverse C-axis: 200 rpm Rapid traverse B-axis: 30 rpm Max. tool diameter: 90 mm Max. tool diameter without adjacent tools: 130 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Number of axes: 6 Control: Okuma OSP P200L Dimensions & Weight Footprint: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Documentation/manual Stepless speed adjustment Marpos tool sensor Chip conveyor & coolant system with compact belt filtration unit ATC 60 system HSKA-63 (60 tools)

Stanje: rabljeno, NAPAJALNIK OKUMA 5000T GLP OPUS E0451-521-037. 2663 Iiodpfxoy S Dr Us Abxjc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 280 mm, pomik po osi Z: 500 mm, moč vretenovega motorja: 22.000 W, število osi: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It offers a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust 12-station turret. If you are looking for a high-quality lathe, consider the Okuma LB 300M X 500 horizontal turning center we have for sale. Please contact us for further details. • CNC: OSP U100L • Maximum turning diameter: 340 mm • Maximum turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increments) • Rapid traverse: X 20,000 mm/min; Z 25,000 mm/min Iiedpfx Aboy N Sabsxoc • Spindle nose: ASA 6 • Bar capacity: 65 mm • Driven tools: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: Quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional Equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blower • Driven tool holder • 4 radial driven tools • 4 axial driven tools Technical Specification: Taper size: VDI 40 Counter spindle: No Driven tools: Yes

Stanje: novo, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Standard technical specifications: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Max. machinable diameter: 360 mm Max. workpiece length: 250 mm Travel (X axis): 260 mm Travel (Z axis): 350 mm Travel (Y axis): 100 mm (+/-50 mm) C axis: 360° (0.001° incremental) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tool stations: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC controller including CE mark & EMC 1 set ‘European Standard Specification’ 1-1. V12 radial turret head 1 set 1-2. Spindle 1 set (1) Spindle speed, 50-6,000 rpm (1 set) (2) Spindle motor Prex 11/7.5 kW (1 set) (3) Spindle nose: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001° incremental) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Double-acting foot pedal for chuck and tailstock side 2 sets 1-5. Driven tool motor, PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed, 45 - 6,000 rpm 1 set Isdpfx Aey H H Afebxeic 1-7. Work area lighting 1 set 1-8. Full enclosure 1 set 1-9. Chip tray 1 set 1-10. Door interlock 1 set 1-11. Lubrication monitoring 1 set 1-12. Automatic chuck open/close on main spindle 1 set 1-13. Air blast for chips 1 set 1-14. Base bolts 1 set 1-15. Tool setter 1 set 1-16. CE marking 1 set 1-17. IEC standard compliance 1 set 1-18. Transformer 1 set 1-19. Coolant system with 250W pump 1 set 1-20. OSP-P300L CNC control with 15” color touchscreen monitor 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant, dialogue-based programming interface) (1 set) * Real 3D simulation (1 set) * Cycle time checking (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-related servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-level status indicator lamp 1 set 1-23. Program storage 2GB 1 set 1-24. Operating memory: 2MB 1 set 1-25. Spindle orientation, electric 1 set 1-26. Inch/metric switching 1 set 1-27. Ball screw pitch error compensation on X/Z axes 1 set 1-28. Workpiece ejection monitoring 1 set 1-29. Lifting lugs 1 set 1-33. TAS-C thermal compensation on machine frame 6” chuck Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 1998, Rabljeni CNC stružnica Okuma Iiodpsy U Iz Sefx Abxoc Tip: LCS 15 Vključno z držalom za vpenjalno glavo Dolžina struženja: 280 mm Premer struženja: 270 mm Menjalnik orodij Leto izdelave: 1998 Brez podajalnika palic in odsesavanja meglice

Stanje: rabljeno, NAPAJALNIK OKUMA 5000T GHP OPUS E0451-521-038 . 03487 Iisdpfxsy Suyvj Abxsc

Stanje: rabljeno, OKUMA BREZKRTAČNI SERVOMOTORNI POGON BL-120E-20 Iiedpfx Asy Suw Uobxoc

Stanje: rabljeno, OKUMA NAPAJALNIK ENOSMERNEGA TOKA DCPS-1 ZA 2 OSI Iiedpfxsy Supwe Abxec

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Machine was serviced annually through a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control system: OSP-E 100 L / Expansion kit “M” Kit One Touch IGF Milling spindle slide X/Y/Z/B Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axis Max. turning diameter: 720 mm Turning length: 2,000 mm Distance from tailstock center to spindle nose: 2,505 mm Y axis: 250 mm / +/- 125 mm Main spindle speed up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, therefore only 9 positions instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle, infinitely variable B axis, 0.001° Magazine: 80 stations Tool holder: HSK 100 New Forkhart three-jaw chuck, Ø 400 mm, worth €12,000 Sub-spindle without chuck, currently with mandrels / delivery without mandrels Enlarged main spindle, 110 mm / Ø 150/110 mm Spindle nose, size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measuring system for Y axis Tool length: 450 mm instead of 350 mm Door automation for both doors Chip conveyor Gravity band filter with clean tank, 900 liters Supply pump frequency-controlled up to 20 bar Machine was serviced annually under maintenance contract with Okuma In 2023, the cable carrier for the W axis, including all hoses, was replaced. In October 2024, linear guides for X/Y/Z were renewed. Work performed by Okuma: - Machine cleaned - Cover panels removed - 8th axis removed - Gantry removed and lifted out of machine. ATC removed and lifted out of machine. - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide for ZA, including shoes, installed and tightened to specified torque - New ball screw for ZA, including bearings, mounted and installed - Baseplate of the gantry installed and tightened to specified torque, or screwed to shoes. Lubrication lines connected - ATC, including attachments, installed and connected - New linear guides for YA and XA installed and tightened to specified torque. New ball screw YA including bearing installed - Gantry installed and lubrication lines connected. XA baseplate mounted and aligned - 8th axis installed and aligned - H1 turret mounted - Drive motor for 8th axis installed - Assembly of the 8th axis + new H1 and geometry set - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 h, then drain old oil from 8th axis - Run-in program for H1 and defect report for OEG prepared Iodpfxsy Uhfko Abxoic - Left door installed, various panels adjusted - Chuck installed - Zero points adjusted - Tool change checked

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC stružno in rezkalno središče z 9 CNC osmi, Okuma MacTurn 350 W, leto izdelave 2004, Iedpfx Ajy Uhccebxoic No Dmoy Atu Tjnbyusct OSP-E 100L, dodatni magazin, magazin za 80 orodij, glavni vreteno s C-osjo, nasprotno vreteno s C-osjo, Y-os sedlo zgoraj / rezkalno vreteno, priklop HSK 63, neskončno nastavljiva B-os kot rezkalno vreteno, končna razdalja 1500 mm, vreteno odprtina 80 mm, maks. premer vrtenja Ø 550 mm, stružni premer Ø 350 mm, spodnji revolver 12-postajni z gnanim orodjem, Interlite kompaktna filtrirna enota 900 l, odsesavanje, čas teka vretena pribl. 18.300 h, prenosnik ostružkov, menjalec orodij s popolnoma obnovljenim prijemalom, visokotlačno hlajenje, merilna roka za orodje, menjalec orodij prenovljen, glavno vreteno Kitagawa B - 210, nasprotno vreteno Kitagawa B - 208,

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: L2E0253, CNC stružnica Iijdpfx Aoy Axr Robxec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 660 mm, pomik po osi Z: 660 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P300M, obremenitev mize: 1.500 kg, skupna masa: 9.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 30.000 W, število mest v zalogovniku orodij: 32, število osi: 3, Ta 3-osni obdelovalni center Okuma MB-66VA je bil izdelan leta 2013. Ima hod osi X 1500 mm, hod osi Y 660 mm in hod osi Z 660 mm. Stroj je opremljen z zmogljivim 30 kW vretenom, ki doseže hitrosti do 15.000 vrt/min, ter ima orodjarno s 32 pozicijami. Če iščete kakovostne možnosti obdelave, razmislite o nakupu vertikalnega obdelovalnega centra Okuma MB-66VA, ki je na voljo pri nas. Za dodatne informacije nas kontaktirajte. • Velikost mize: 1500 × 660 mm Iijdpey Ndp Iofx Abxsc Tehnične specifikacije Stožec BT 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 23.723 h, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 235 mm, pomik po osi Z: 1.140 mm, moč vretenovega motorja: 22.000 W, skupna masa: 6.000 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P300, število osi: 3, Ta 3-osni stružnica Okuma Genos L300 E-M je bila izdelana leta 2014. Ima največji premer struženja 300 mm in dolžino struženja do 1000 mm. Stroj je opremljen z vretenom z največjo hitrostjo do 3800 vrt/min in robustnim revolverjem z 12 postajami. Če iščete visokokakovostni CNC stružni stroj, razmislite o Okuma Genos L300 E-M, ki ga ponujamo v prodajo. Za dodatne podrobnosti nas kontaktirajte. • Velikost vpenjalne glave: 203 mm • Najv. premer obdelovanca: 300 mm • Najv. dolžina obdelovanca: 450–520 mm (do 1000 mm opcijsko) • Pomik v osi Z: 450–1140 mm • Premer vretena: 65 mm • Revolver: 12 postaj • Tip orodja/vmesnik: VDI/BMT • C-os: Da Ijdoy I Uu Eopfx Abxsic Tehnične specifikacije Proti-vreteno: Ne Pogonjena orodja: Da

Stanje: rabljeno, Leto izdelave: 2014, Tehnične podrobnosti: x-pomik: 760 mm y-pomik: 760 mm z-pomik: 760 mm Skupna potrebna moč: 43 kW Teža stroja pribl.: 11,5 t Prostorska zahteva pribl.: 2,7 x 4,73 x 2,87 m Iiedpfjxrwpdsx Abxec maks. obremenitev mize: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Iodpsrfw Nhofx Abxoic Tool changer: 20 magazine positions Chip conveyor

Leto izdelave: 2007, stanje: dober (rabljeno), Manufacturer: Okuma Model: LVT-300 M Control: OSP-P200L Year of manufacture: 2007 X-axis travel: 210 mm Z-axis travel: 360 mm Main spindle power: 22 kW Driven live tools: 7.5 kW / 3,000 rpm Infeed table Outfeed table Set of chuck jaws Set of tool holders Chip conveyor Coolant system: 9 bar Grundfos Specifications Iodeku Aaaepfx Abxsic Metric Imperial (US Standard) Max. turning diameter: 280 mm Table diameter: Ø 210 mm Horizontal slide travel: 360 mm Tool changer: 12 stations Spindle speed: 4,000 rpm C-axis: 360,000° Dimensions (Approximate) Currently, there are no dimensions available for this machine. Please note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. While the information is provided in good faith, its accuracy cannot be guaranteed. Therefore, no warranties or contractual commitments are implied. We recommend verifying all critical details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, stružna dolžina: 995 mm, izvrtina vretena: 80 mm, Maksimalni premer struženja: 530 mm Os X: 260 mm Os Z: 995 mm Vretenina odprtina: 80 mm Hitrost vretena: 5000 vrt./min Moč vretena: 22 kW Hitrost protivretena: 6000 vrt./min Premer prehoda protivretena: 62 mm Moč protivretena: 11 kW Menjalnik orodij: 12 pozicij Hitrost pogonskih orodij: 6000 vrt./min Tool Eye: da Delovne ure: 2800 h Dolžina: 3000 mm Iijdpsx I Nbtsfx Abxoc Širina: 1800 mm Višina: 1900 mm Teža: 6350 kg Opozorilo: Podatki na tej strani so bili po najboljšem vedenju zbrani z naše strani in, kjer je bilo mogoče, od proizvajalca. Podatki so predstavljeni v dobri veri, vendar natančnost ni zagotovljena. Podatki ne predstavljajo pravne podlage ali zavezujočih pogojev. Priporočamo, da vse pomembne podatke pred nakupom preverite.

Stanje: dober (rabljeno), izvrtina vretena: 360 mm, potovalna razdalja osi X: 798 mm, pomik po osi Z: 358 mm, moč vretenovega motorja: 45.000 W, največja hitrost vrtenja: 500 obr/min, skupna višina: 2.100 mm, skupna dolžina: 8.100 mm, skupna širina: 2.750 mm, skupna masa: 13.000 kg, Maks. premer struženja: 665 mm X-os: 798 mm Z-os: 358 mm Vrtina vretena: 360 mm Hitrost vrtenja: 500 obr/min Moč vretena: 45 kW Vpenjanje pinole: 6 Mk Hod pinole: 230 mm Premer pinole: 150 mm Dolžina: 8100 mm Širina: 275 mm Višina: 2100 mm Teža: 13.000 kg Iiedpfewxb Erex Abxec Prosimo, upoštevajte: Informacije na tej strani so bile zbrane po naših najboljših močeh in, kjer je bilo mogoče, pridobljene od proizvajalca. Podane so v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo zaveze ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Ijdpfjwq Rpwjx Abxjic Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Iodpfsyn Em Rox Abxjic Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.